Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 502: Advanced Structural Engineering & Bridge Design

Bridge aesthetics, historical forms, highway bridge loadings (Eurocode 1 LM1-LM3 / BD 37 / AASHTO HL-93), longitudinal and transverse load distribution in bridge decks (Courbon's and grillage methods), prestressed concrete bridge decks, elastomeric bearings, piers, abutments, and expansion joints.

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Bridge aesthetics, historical forms, highway bridge loadings (Eurocode 1 LM1-LM3 / BD 37 / AASHTO HL-93), longitudinal and transverse load distribution in bridge decks (Courbon's and grillage methods), prestressed concrete bridge decks, elastomeric bearings, piers, abutments,...

What You'll Learn

  • Evaluate bridge site constraints, span configurations, and structural typologies (beam-and-slab, box girder, cable-stayed).
  • Determine vehicular bridge live loading envelopes adhering to Eurocode 1 (LM1/LM3) and AASHTO HL-93 design standards.
  • Analyze transverse wheel load distribution across bridge decks using Courbon's theory and 2D grillage analogies.
  • Design prestressed concrete bridge deck girders incorporating post-tensioned parabolic tendon profiles and prestress losses.
  • Design reinforced concrete bridge piers, abutments, elastomeric rubber bearing pads, and expansion joints.

Requirements

  • Pass in CVE 401 and CVE 403.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 &bull...

Module 1 • Subtopic 1•17,811 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs •...

Module 1 • Subtopic 2•28,248 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 1 Assessment: Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 1: Bridge Engineering Overview: Anatomy, Structural Forms (Slab, Beam-and-Slab, Box Girder, Arch, Cable-Stayed), and Site Selection. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN...

Module 2 • Subtopic 1•17,815 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qu...

Module 2 • Subtopic 2•28,259 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 2 Assessment: Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 2: Bridge Loading Actions: Permanent Loads, Traffic Load Models (Eurocode 1 LM1-LM4, AASHTO HL-93), Wind, and Braking Forces. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502...

Module 3 • Subtopic 1•17,608 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs &b...

Module 3 • Subtopic 2•27,303 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 3 Assessment: Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 3: Deck Analysis: 1D Transverse Strips, Courbon's Method for Transverse Load Distribution, and Morice-Little/Hendry-Jagger Theories. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN...

Module 4 • Subtopic 1•17,665 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qu...

Module 4 • Subtopic 2•26,669 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 4 Assessment: Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 4: Grillage Analogy for Bridge Decks: Grillage Discretization, Torsional Stiffness Parameters, and Computational Mesh Setups. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN...

Module 5 • Subtopic 1•17,922 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qu...

Module 5 • Subtopic 2•27,355 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 5 Assessment: Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 5: Prestressed Concrete in Bridge Decks: Pre-Tensioning, Post-Tensioning Systems, Tendon Profiles, and Cable Anchorage Zones. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN-CVE-STR-10 •...

Module 6 • Subtopic 1•17,474 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manageme...

Module 6 • Subtopic 2•27,059 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 6 Assessment: Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 6: Prestress Losses: Elastic Shortening, Friction, Anchorage Slip, Creep, Shrinkage, and Steel Relaxation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN-CVE-...

Module 7 • Subtopic 1•17,958 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 7 • Subtopic 2•27,396 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 7 Assessment: Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 7: Substructure Design: Reinforced Concrete Bridge Abutments, Wing Walls, Cantilever Piers, Pile Caps, and Scour Checks. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 502 • 500L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Advanced Structural Engineering & Bridge Design • NUC-CCMAS-CVE-502 • COREN-C...

Module 8 • Subtopic 1•17,551 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers: Applied Engineering Computation, Design & Verification

CVE 502 • 500L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qual...

Module 8 • Subtopic 2•26,557 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 502 Ch 8 Assessment: Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 502 Chapter 8: Bridge Articulation: Elastomeric and Pot Bearings, Expansion Joints, Bridge Drainage, Parapets, and Seismic Restrainers. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 502: Advanced Structural Engineering & Bridge Design
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 502: Advanced Structural Engineering & Bridge Design.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.