Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 210: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen)

Structural steel metallurgy and stress-strain curves, structural timber grading and moisture behavior, bituminous binders, asphalt concrete mix design (Marshall method), polymers, and masonry units.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Structural steel metallurgy and stress-strain curves, structural timber grading and moisture behavior, bituminous binders, asphalt concrete mix design (Marshall method), polymers, and masonry units. Curriculum Structure & Core Modules: • 1. Structural Steel Metallurgy: Carbon...

What You'll Learn

  • Interpret structural steel stress-strain curves (yield plateau, ultimate tensile strength, elongation, Charpy impact).
  • Evaluate physical and mechanical properties of structural timber (grain orientation, moisture content, defect grading).
  • Characterize bituminous binder rheology using penetration, softening point, ductility, and flash point tests.
  • Design asphalt concrete mixtures for highway pavements using the Marshall mix design method.
  • Analyze environmental degradation, fatigue, and durability of polymers and masonry units in infrastructure.

Requirements

  • Pass in CVE 211.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 1 • Lecture 1 Chapter 1: Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MAT-02 • Eur...

Module 1 • Subtopic 1•17,437 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 1 • Lecture 2 Chapter 1: Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Enginee...

Module 1 • Subtopic 2•27,020 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 1 Assessment: Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 1: Structural Steel Metallurgy: Carbon Content, Heat Treatment, Alloying, and Weldability. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 2 • Lecture 1 Chapter 2: Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MAT-02 &b...

Module 2 • Subtopic 1•17,493 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 2 • Lecture 2 Chapter 2: Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied...

Module 2 • Subtopic 2•27,068 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 2 Assessment: Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 2: Mechanical Properties of Structural Steel: Tensile Yielding, Ductility, Toughness, and Fatigue. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 3 • Lecture 1 Chapter 3: Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MA...

Module 3 • Subtopic 1•17,909 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 3 • Lecture 2 Chapter 3: Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 3 • Subtopic 2•27,344 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 3 Assessment: Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 3: Timber as an Engineering Material: Cellular Structure, Moisture Equilibrium, Shrinkage, and Seasoning. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 4 • Lecture 1 Chapter 4: Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MAT-02 &...

Module 4 • Subtopic 1•17,895 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 4 • Lecture 2 Chapter 4: Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applie...

Module 4 • Subtopic 2•27,336 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 4 Assessment: Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 4: Stress Grading of Timber: Visual Defects, Mechanical Machine Stress Grading, and Creep Behavior. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 5 • Lecture 1 Chapter 5: Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE...

Module 5 • Subtopic 1•17,861 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 5 • Lecture 2 Chapter 5: Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management...

Module 5 • Subtopic 2•27,293 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 5 Assessment: Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 5: Bituminous Binders: Origin, Chemistry, Penetration Grade, Performance Grading (Superpave), and Viscosity. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 6 • Lecture 1 Chapter 6: Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MA...

Module 6 • Subtopic 1•17,877 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 6 • Lecture 2 Chapter 6: Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 6 • Subtopic 2•27,312 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 6 Assessment: Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 6: Bitumen Laboratory Characterization: Penetration, Ring and Ball Softening, Ductility, and Flash Point. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 7 • Lecture 1 Chapter 7: Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-MAT-02 •...

Module 7 • Subtopic 1•17,787 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 7 • Lecture 2 Chapter 7: Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Eng...

Module 7 • Subtopic 2•27,233 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 7 Assessment: Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 7: Hot Mix Asphalt (HMA): Mineral Filler, Air Voids, VMA, and Marshall Mix Design Methodology. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 210 • 200L • Materials Science Chapter 8 • Lecture 1 Chapter 8: Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen) • NUC-CCMAS-CVE-206 • COREN-CVE-M...

Module 8 • Subtopic 1•17,937 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering: Applied Engineering Computation, Design & Verification

CVE 210 • 200L • Materials Science Chapter 8 • Lecture 2 Chapter 8: Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 8 • Subtopic 2•27,371 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 210 Ch 8 Assessment: Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 210 Chapter 8: Masonry Units (Burnt Clay, Concrete Blocks) and Structural Polymers/Geosynthetics in Civil Engineering. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 210: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 210: Civil Engineering Materials II (Steel, Timber, Asphalt & Bitumen).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.