Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 112: Computer-Aided Drafting (CAD) & Civil Symbology

2D computer-aided drafting using AutoCAD/FreeCAD, layer management, blocks, dynamic dimensions, civil plan/profile views, and structural detailing.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

2D computer-aided drafting using AutoCAD/FreeCAD, layer management, blocks, dynamic dimensions, civil plan/profile views, and structural detailing. Curriculum Structure & Core Modules: • 1. Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups • 2....

What You'll Learn

  • Navigate professional CAD interfaces, command lines, Cartesian coordinates, and drawing templates.
  • Create precision 2D geometric drawings using snaps, constraints, polylines, and trimming tools.
  • Implement standardized layer hierarchies, line weights, line types, and annotation styles.
  • Draft complete civil site layouts, foundation plans, and structural beam/column schedules.
  • Configure viewports, paper space layouts, title blocks, and plot sheets to standard engineering scales.

Requirements

  • Personal computer meeting minimum CAD hardware specifications.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 1 • Lecture 1 Chapter 1: Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards /...

Module 1 • Subtopic 1•17,356 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 1 • Lecture 2 Chapter 1: Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sc...

Module 1 • Subtopic 2•27,106 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 1 Assessment: Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 1: Introduction to 2D CAD User Interfaces, Coordinate Systems, and Drawing Setups. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 2 • Lecture 1 Chapter 2: Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards /...

Module 2 • Subtopic 1•17,585 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 2 • Lecture 2 Chapter 2: Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sc...

Module 2 • Subtopic 2•28,072 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 2 Assessment: Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 2: Basic Drawing Commands: Lines, Polylines, Circles, Arcs, Polygons, and Splines. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 3 • Lecture 1 Chapter 3: Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards...

Module 3 • Subtopic 1•17,270 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 3 • Lecture 2 Chapter 3: Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering...

Module 3 • Subtopic 2•27,018 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 3 Assessment: Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 3: Modifying Entities: Move, Copy, Rotate, Mirror, Offset, Trim, Extend, and Fillet. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Layer Management, Color Coding, Line Weights, and Linestyle Standards: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 4 • Lecture 1 Chapter 4: Layer Management, Color Coding, Line Weights, and Linestyle Standards — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards / ASTM / A...

Module 4 • Subtopic 1•17,280 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Layer Management, Color Coding, Line Weights, and Linestyle Standards: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 4 • Lecture 2 Chapter 4: Layer Management, Color Coding, Line Weights, and Linestyle Standards — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 4 • Subtopic 2•27,039 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 4 Assessment: Layer Management, Color Coding, Line Weights, and Linestyle Standards

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 4: Layer Management, Color Coding, Line Weights, and Linestyle Standards. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 5 • Lecture 1 Chapter 5: Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards / ASTM...

Module 5 • Subtopic 1•17,298 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 5 • Lecture 2 Chapter 5: Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope &a...

Module 5 • Subtopic 2•27,054 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 5 Assessment: Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 5: Annotation, Dynamic Dimensioning, Multileader Styles, and Text Standards. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Blocks, Attributes, Symbols Library, and External References (Xrefs): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 6 • Lecture 1 Chapter 6: Blocks, Attributes, Symbols Library, and External References (Xrefs) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards / ASTM / AA...

Module 6 • Subtopic 1•17,258 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Blocks, Attributes, Symbols Library, and External References (Xrefs): Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 6 • Lecture 2 Chapter 6: Blocks, Attributes, Symbols Library, and External References (Xrefs) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 6 • Subtopic 2•27,018 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 6 Assessment: Blocks, Attributes, Symbols Library, and External References (Xrefs)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 6: Blocks, Attributes, Symbols Library, and External References (Xrefs). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 7 • Lecture 1 Chapter 7: Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards / ASTM...

Module 7 • Subtopic 1•17,406 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 7 • Lecture 2 Chapter 7: Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 7 • Subtopic 2•26,210 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 7 Assessment: Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 7: Drafting Civil Infrastructure Plans: Site Plans, Alignments, and Sections. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 112 • 100L • Engineering Design Chapter 8 • Lecture 1 Chapter 8: Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Computer-Aided Drafting (CAD) & Civil Symbology • NUC-CCMAS-CVE-102 • COREN-CVE-CAD-01 • Eurocode / BS EN Standards /...

Module 8 • Subtopic 1•17,300 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting: Applied Engineering Computation, Design & Verification

CVE 112 • 100L • Engineering Design Chapter 8 • Lecture 2 Chapter 8: Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sco...

Module 8 • Subtopic 2•27,051 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 112 Ch 8 Assessment: Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 112 Chapter 8: Paper Space Layouts, Viewports, Title Blocks, Sheet Scaling, and PDF Plotting. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 112: Computer-Aided Drafting (CAD) & Civil Symbology
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 112: Computer-Aided Drafting (CAD) & Civil Symbology.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 112: Computer-Aided Drafting (CAD) & Civil Symbology | PAMCET University — B.Eng | PAMCET