Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 207: Engineering Geology & Rock Mechanics

Geological minerals, rock classification (igneous, sedimentary, metamorphic), structural geology (faults, folds, joints), weathering, seismicity, and rock mass characterization.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Geological minerals, rock classification (igneous, sedimentary, metamorphic), structural geology (faults, folds, joints), weathering, seismicity, and rock mass characterization. Curriculum Structure & Core Modules: • 1. Earth Structure, Plate Tectonics, and Geological Processes...

What You'll Learn

  • Identify key rock-forming minerals and classify rock samples based on physical and petrographic traits.
  • Interpret structural geological features (anticlines, synclines, normal/reverse faults, joint sets) on site maps.
  • Evaluate mechanical weathering profiles and weathering effects on foundation rock mass stability.
  • Determine Rock Quality Designation (RQD) and Rock Mass Rating (RMR) for tunnel and dam foundations.
  • Assess geological hazards including landslides, sinkholes, seismic fault zones, and ground subsidence.

Requirements

  • None.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 1 • Lecture 1 Chapter 1: Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standa...

Module 1 • Subtopic 1•17,411 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 1 • Lecture 2 Chapter 1: Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applie...

Module 1 • Subtopic 2•27,162 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 1 Assessment: Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 1: Earth Structure, Plate Tectonics, and Geological Processes Relevant to Civil Engineering. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 2 • Lecture 1 Chapter 2: Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standards /...

Module 2 • Subtopic 1•17,389 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 2 • Lecture 2 Chapter 2: Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Eng...

Module 2 • Subtopic 2•25,705 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 2 Assessment: Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 2: Mineralogy: Physical Properties and Identification of Primary Rock-Forming Minerals. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 3 • Lecture 1 Chapter 3: Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Sta...

Module 3 • Subtopic 1•17,365 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 3 • Lecture 2 Chapter 3: Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. App...

Module 3 • Subtopic 2•27,113 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 3 Assessment: Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 3: Petrology: Igneous, Sedimentary, and Metamorphic Rocks as Construction and Foundation Media. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 4 • Lecture 1 Chapter 4: Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standard...

Module 4 • Subtopic 1•17,295 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 4 • Lecture 2 Chapter 4: Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied...

Module 4 • Subtopic 2•27,048 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 4 Assessment: Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 4: Structural Geology: Folds, Faults, Joints, Unconformities, and Strike/Dip Measurements. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Geological Weathering, Regolith Development, Residual Soils, and Karst Topography: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 5 • Lecture 1 Chapter 5: Geological Weathering, Regolith Development, Residual Soils, and Karst Topography — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standards / A...

Module 5 • Subtopic 1•17,347 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Geological Weathering, Regolith Development, Residual Soils, and Karst Topography: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 5 • Lecture 2 Chapter 5: Geological Weathering, Regolith Development, Residual Soils, and Karst Topography — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engin...

Module 5 • Subtopic 2•27,105 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 5 Assessment: Geological Weathering, Regolith Development, Residual Soils, and Karst Topography

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 5: Geological Weathering, Regolith Development, Residual Soils, and Karst Topography. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 6 • Lecture 1 Chapter 6: Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standard...

Module 6 • Subtopic 1•17,443 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 6 • Lecture 2 Chapter 6: Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied...

Module 6 • Subtopic 2•26,245 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 6 Assessment: Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 6: Geological Investigation for Dams, Reservoirs, Tunnels, Highways, and Deep Foundations. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 7 • Lecture 1 Chapter 7: Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standards /...

Module 7 • Subtopic 1•17,321 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 7 • Lecture 2 Chapter 7: Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engi...

Module 7 • Subtopic 2•27,078 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 7 Assessment: Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 7: Rock Mass Classification: Core Recovery, RQD, Rock Mass Rating (RMR), and Q-System. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 207 • 200L • Geotechnical Engineering Chapter 8 • Lecture 1 Chapter 8: Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Engineering Geology & Rock Mechanics • NUC-CCMAS-CVE-203 • COREN-CVE-GEO-01 • Eurocode / BS EN Standard...

Module 8 • Subtopic 1•17,331 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation: Applied Engineering Computation, Design & Verification

CVE 207 • 200L • Geotechnical Engineering Chapter 8 • Lecture 2 Chapter 8: Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied...

Module 8 • Subtopic 2•27,084 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 207 Ch 8 Assessment: Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 207 Chapter 8: Geological Hazards: Earthquakes, Landslides, Slope Failures, and Subsidence Mitigation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 207: Engineering Geology & Rock Mechanics
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 207: Engineering Geology & Rock Mechanics.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 207: Engineering Geology & Rock Mechanics | PAMCET University — B.Eng | PAMCET