Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 413: Environmental Engineering & Solid/Hazardous Waste Management

Municipal solid waste generation, physical/chemical characterization, integrated waste hierarchy (reduce, reuse, recycle), engineered sanitary landfill design (liners, leachate collection, gas migration), composting, incineration, hazardous waste treatment, and environmental remediation.

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Municipal solid waste generation, physical/chemical characterization, integrated waste hierarchy (reduce, reuse, recycle), engineered sanitary landfill design (liners, leachate collection, gas migration), composting, incineration, hazardous waste treatment, and environmental...

What You'll Learn

  • Characterize municipal solid waste generation rates, composition, proximate analysis, and calorific value.
  • Design engineered sanitary landfills incorporating composite geomembrane clay liners, leachate collection, and cap covers.
  • Model landfill gas production (methane generation kinetics) and specify extraction and flaring systems.
  • Evaluate municipal recycling, material recovery facilities (MRF), composting, and waste-to-energy incineration.
  • Formulate hazardous waste containment and site remediation strategies for contaminated brownfield land.

Requirements

  • Pass in CVE 105.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 1 • Lecture 1 Chapter 1: Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 •...

Module 1 • Subtopic 1•17,552 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 1 • Lecture 2 Chapter 1: Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality R...

Module 1 • Subtopic 2•27,256 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 1 Assessment: Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 1: Introduction to Environmental Engineering: Natural Ecosystems, Mass Balance Principles, and Pollutant Transport. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 2 • Lecture 1 Chapter 2: Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-...

Module 2 • Subtopic 1•17,813 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 2 • Lecture 2 Chapter 2: Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA...

Module 2 • Subtopic 2•28,244 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 2 Assessment: Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 2: Solid Waste Characterization: Sources, Per-Capita Generation Rates, Physical/Chemical Composition, and Proximate Analysis. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 3 • Lecture 1 Chapter 3: Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 &bu...

Module 3 • Subtopic 1•17,833 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 3 • Lecture 2 Chapter 3: Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qualit...

Module 3 • Subtopic 2•28,271 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 3 Assessment: Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 3: Integrated Waste Management Hierarchy: Waste Minimization, Segregation at Source, Recycling, and Material Recovery. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 4 • Lecture 1 Chapter 4: Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 •...

Module 4 • Subtopic 1•17,401 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 4 • Lecture 2 Chapter 4: Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ri...

Module 4 • Subtopic 2•27,117 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 4 Assessment: Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 4: Collection and Transport: Routing Optimization, Transfer Stations, Compactor Vehicles, and Logistical Modeling. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 5 • Lecture 1 Chapter 5: Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 • CO...

Module 5 • Subtopic 1•17,462 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 5 • Lecture 2 Chapter 5: Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 5 • Subtopic 2•27,169 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 5 Assessment: Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 5: Sanitary Landfill Engineering: Site Selection, Cell Sequencing, Clay and Geomembrane Composite Liner Systems. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 6 • Lecture 1 Chapter 6: Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 &bul...

Module 6 • Subtopic 1•17,811 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 6 • Lecture 2 Chapter 6: Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 6 • Subtopic 2•28,250 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 6 Assessment: Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 6: Leachate Management: Water Balance Modeling (HELP Model), Leachate Collection Pipes, Treatment, and Recirculation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 7 • Lecture 1 Chapter 7: Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 • C...

Module 7 • Subtopic 1•17,502 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 7 • Lecture 2 Chapter 7: Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 7 • Subtopic 2•27,208 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 7 Assessment: Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 7: Landfill Gas Management: Biochemical Decomposition Phases, Methane Recovery, Gas Wells, and Energy Generation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 413 • 400L • Environmental Engineering Chapter 8 • Lecture 1 Chapter 8: Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Environmental Engineering & Solid/Hazardous Waste Management • NUC-CCMAS-CVE-413 &bul...

Module 8 • Subtopic 1•17,566 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation: Applied Engineering Computation, Design & Verification

CVE 413 • 400L • Environmental Engineering Chapter 8 • Lecture 2 Chapter 8: Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 8 • Subtopic 2•27,268 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 413 Ch 8 Assessment: Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 413 Chapter 8: Hazardous Waste Treatment Technologies, Incineration Emissions Control, and Contaminated Land In-Situ Remediation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 413: Environmental Engineering & Solid/Hazardous Waste Management
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 413: Environmental Engineering & Solid/Hazardous Waste Management.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.