Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 405: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity)

Subsurface site exploration, Standard Penetration Test (SPT), Cone Penetration Test (CPT), Terzaghi, Meyerhof, and Hansen ultimate bearing capacity equations, eccentric/inclined loads, structural design of isolated pad, combined, and mat (raft) foundations.

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Subsurface site exploration, Standard Penetration Test (SPT), Cone Penetration Test (CPT), Terzaghi, Meyerhof, and Hansen ultimate bearing capacity equations, eccentric/inclined loads, structural design of isolated pad, combined, and mat (raft) foundations. Curriculum Structure...

What You'll Learn

  • Plan subsurface exploration boreholes and interpret field SPT N-values and CPT cone resistance profiles.
  • Calculate gross and net ultimate bearing capacity of shallow foundations using Terzaghi and general Meyerhof/Hansen equations.
  • Adjust bearing capacity for groundwater table fluctuations, footings on slopes, and eccentric/inclined column loadings.
  • Estimate immediate elastic settlement and primary consolidation settlement of footings and verify permissible limits.
  • Execute the structural reinforced concrete design of isolated pad footings, strap footings, and mat (raft) foundations.

Requirements

  • Pass in CVE 305 and CVE 306.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 1 • Lecture 1 Chapter 1: Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCMAS-CVE-405 &...

Module 1 • Subtopic 1•17,598 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube): Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 1 • Lecture 2 Chapter 1: Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 1 • Subtopic 2•26,345 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 1 Assessment: Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 1: Site Investigation: Planning Exploration Programs, Rotary Drilling, Soil Sampling (Split-Spoon, Shelby Tube). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 2 • Lecture 1 Chapter 2: In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCMAS-CVE-405...

Module 2 • Subtopic 1•17,582 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 2 • Lecture 2 Chapter 2: In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 2 • Subtopic 2•26,327 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 2 Assessment: In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 2: In-Situ Field Testing: Standard Penetration Test (SPT), Cone Penetrometer (CPT), Vane Shear, and Pressuremeter. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 3 • Lecture 1 Chapter 3: Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCMAS-CVE-405 • COREN-CVE-GEO-04 &b...

Module 3 • Subtopic 1•17,494 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 3 • Lecture 2 Chapter 3: Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Eng...

Module 3 • Subtopic 2•26,266 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 3 Assessment: Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 3: Modes of Shear Failure: General, Local, and Punching Shear Beneath Shallow Footings. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 4 • Lecture 1 Chapter 4: Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC...

Module 4 • Subtopic 1•17,636 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic): Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 4 • Lecture 2 Chapter 4: Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FM...

Module 4 • Subtopic 2•26,367 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 4 Assessment: Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 4: Ultimate Bearing Capacity: Terzaghi's Formulation, Shape, Depth, and Load Inclination Factors (Meyerhof, Hansen, Vesic). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 5 • Lecture 1 Chapter 5: Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCMAS-CVE-405 • COREN-CVE-GEO-04 •...

Module 5 • Subtopic 1•17,682 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 5 • Lecture 2 Chapter 5: Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Enginee...

Module 5 • Subtopic 2•26,458 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 5 Assessment: Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 5: Effect of High Ground Water Table on Foundation Bearing Capacity and Settlement. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 6 • Lecture 1 Chapter 6: Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCMAS-CVE-405 &bul...

Module 6 • Subtopic 1•17,628 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 6 • Lecture 2 Chapter 6: Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Man...

Module 6 • Subtopic 2•26,378 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 6 Assessment: Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 6: Eccentric and Inclined Foundation Loadings: Core of the Section, Trapezoidal/Triangular Contact Pressures. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 7 • Lecture 1 Chapter 7: Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CCM...

Module 7 • Subtopic 1•17,716 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 7 • Lecture 2 Chapter 7: Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Q...

Module 7 • Subtopic 2•26,451 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 7 Assessment: Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 7: Settlement Analysis: Elastic Immediate Settlement, Consolidation Settlement, and Allowable Total/Differential Settlement. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 405 • 400L • Geotechnical Engineering Chapter 8 • Lecture 1 Chapter 8: Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity) • NUC-CC...

Module 8 • Subtopic 1•18,048 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts: Applied Engineering Computation, Design & Verification

CVE 405 • 400L • Geotechnical Engineering Chapter 8 • Lecture 2 Chapter 8: Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA...

Module 8 • Subtopic 2•27,459 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 405 Ch 8 Assessment: Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 405 Chapter 8: Structural Design of Reinforced Concrete Footings: Isolated Pads, Cantilever Strap Footings, Combined Footings, and Rafts. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 405: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 405: Foundation Engineering I (Shallow Footings, Rafts & Bearing Capacity).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.