Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 501: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability)

Driven and bored concrete piles, static pile capacity equations (alpha and beta methods), dynamic pile driving formulas (Hiley), pile group efficiency, pile load testing, anchored sheet pile walls, and slope stability analysis (Bishop, Fellenius methods).

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Driven and bored concrete piles, static pile capacity equations (alpha and beta methods), dynamic pile driving formulas (Hiley), pile group efficiency, pile load testing, anchored sheet pile walls, and slope stability analysis (Bishop, Fellenius methods). Curriculum Structure &...

What You'll Learn

  • Compute single pile compressive capacity in clays and sands using static alpha, beta, and Meyerhof formulations.
  • Determine pile group capacity, settlement, and group efficiency in cohesive and cohesionless soil strata.
  • Interpret static vertical maintained pile load tests to verify settlement criteria and ultimate geotechnical failure.
  • Design anchored and cantilevered sheet pile walls in granular and cohesive soils using free and fixed earth support methods.
  • Evaluate factors of safety for natural and engineered soil slopes using ordinary method of slices and Bishop's simplified method.

Requirements

  • Pass in CVE 405.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 1 • Lecture 1 Chapter 1: Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) • N...

Module 1 • Subtopic 1•17,613 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons: Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 1 • Lecture 2 Chapter 1: Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 1 • Subtopic 2•26,342 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 1 Assessment: Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 1: Deep Foundation Typologies: Driven Precast Piles, Cast-In-Situ Bored Piles (Auger/CFA), Micro-Piles, and Caissons. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 2 • Lecture 1 Chapter 2: Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) • NUC-CCMAS-C...

Module 2 • Subtopic 1•17,625 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method): Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 2 • Lecture 2 Chapter 2: Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manag...

Module 2 • Subtopic 2•26,364 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 2 Assessment: Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 2: Static Axial Capacity of Single Piles in Cohesive Soils (Alpha Method) and Granular Soils (Beta Method). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 3 • Lecture 1 Chapter 3: Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) • NUC...

Module 3 • Subtopic 1•17,653 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag): Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 3 • Lecture 2 Chapter 3: Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ri...

Module 3 • Subtopic 2•26,384 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 3 Assessment: Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 3: Pile Point Resistance, End Bearing Formulations, Critical Depth Concepts, and Negative Skin Friction (Downdrag). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 4 • Lecture 1 Chapter 4: Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) •...

Module 4 • Subtopic 1•17,591 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles: Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 4 • Lecture 2 Chapter 4: Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 4 • Subtopic 2•26,319 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 4 Assessment: Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 4: Pile Groups: Spacing, Stress Overlap, Block Failure in Clay, Settlement of Pile Groups, and Laterally Loaded Piles. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA): Theoretical Foundations, Continuum Mechanics & Architectur

CVE 501 • 500L • Geotechnical Engineering Chapter 5 • Lecture 1 Chapter 5: Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope St...

Module 5 • Subtopic 1•17,701 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA): Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 5 • Lecture 2 Chapter 5: Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs &bu...

Module 5 • Subtopic 2•26,413 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 5 Assessment: Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 5: Dynamic Pile Analysis: Wave Equation Basics, Hiley Formula, Pile Integrity Testing (PIT), and High-Strain Dynamic Load Tests (PDA). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support): Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 6 • Lecture 1 Chapter 6: Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support) — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) &b...

Module 6 • Subtopic 1•17,673 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support): Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 6 • Lecture 2 Chapter 6: Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support) — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qu...

Module 6 • Subtopic 2•26,396 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 6 Assessment: Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 6: Design of Flexible Earth-Retaining Structures: Cantilever Sheet Piles and Anchored Bulkheads (Free/Fixed Earth Support). Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 501 • 500L • Geotechnical Engineering Chapter 7 • Lecture 1 Chapter 7: Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) • NUC-CCMAS-CVE-501 • COREN-C...

Module 7 • Subtopic 1•17,431 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks: Applied Engineering Computation, Design & Verification

CVE 501 • 500L • Geotechnical Engineering Chapter 7 • Lecture 2 Chapter 7: Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engi...

Module 7 • Subtopic 2•26,890 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 7 Assessment: Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 7: Ground Anchors, Deadman Ties, Strutted Excavations, and Cofferdam Stability Checks. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method: Theoretical Foundations, Continuum Mechanics & A

CVE 501 • 500L • Geotechnical Engineering Chapter 8 • Lecture 1 Chapter 8: Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Foundation Engineering II (Deep Foundations, Piles, Sheet P...

Module 8 • Subtopic 1•17,958 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method: Applied Engineering Computation, Design & Verifi

CVE 501 • 500L • Geotechnical Engineering Chapter 8 • Lecture 2 Chapter 8: Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory T...

Module 8 • Subtopic 2•28,343 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 501 Ch 8 Assessment: Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 501 Chapter 8: Slope Stability Analysis: Infinite Slopes, Planar Failure, Circular Slip Surfaces, Ordinary Method of Slices, and Bishop's Simplified Method. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 501: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 501: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 501: Foundation Engineering II (Deep Foundations, Piles, Sheet Piles & Slope Stability) | PAMCET University — B.Eng | PAMCET