Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 105: General Chemistry for Civil Engineers (Construction Chemistry & Hydration)

Chemical bonding, cement chemistry, hydration of tricalcium silicates, corrosion mechanisms in steel, and environmental water chemistry.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Chemical bonding, cement chemistry, hydration of tricalcium silicates, corrosion mechanisms in steel, and environmental water chemistry. Curriculum Structure & Core Modules: • 1. Atomic Structure, Chemical Bonding, and Crystal Lattices • 2. Chemical Equilibrium, Acid-Base...

What You'll Learn

  • Explain Portland cement manufacturing and mineral phase composition (C3S, C2S, C3A, C4AF).
  • Analyze the chemical kinetics of cement hydration and calcium silicate hydrate (C-S-H) gel formation.
  • Evaluate electrochemical corrosion mechanisms in reinforced concrete steel rebar.
  • Assess chemical attack on concrete structures from sulfates, chlorides, and acid precipitation.
  • Determine water quality chemistry, pH, alkalinity, and hardness parameters for construction and supply.

Requirements

  • Secondary school chemistry and physics.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Atomic Structure, Chemical Bonding, and Crystal Lattices: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 1 • Lecture 1 Chapter 1: Atomic Structure, Chemical Bonding, and Crystal Lattices — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN Stan...

Module 1 • Subtopic 1•17,694 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Atomic Structure, Chemical Bonding, and Crystal Lattices: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 1 • Lecture 2 Chapter 1: Atomic Structure, Chemical Bonding, and Crystal Lattices — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Direct...

Module 1 • Subtopic 2•24,998 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 1 Assessment: Atomic Structure, Chemical Bonding, and Crystal Lattices

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 1: Atomic Structure, Chemical Bonding, and Crystal Lattices. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 2 • Lecture 1 Chapter 2: Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS...

Module 2 • Subtopic 1•17,722 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 2 • Lecture 2 Chapter 2: Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Desig...

Module 2 • Subtopic 2•25,018 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 2 Assessment: Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 2: Chemical Equilibrium, Acid-Base Reactions, and pH Buffer Systems. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Raw Materials and Pyrochemical Mineralogy of Portland Cement: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 3 • Lecture 1 Chapter 3: Raw Materials and Pyrochemical Mineralogy of Portland Cement — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN...

Module 3 • Subtopic 1•17,871 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Raw Materials and Pyrochemical Mineralogy of Portland Cement: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 3 • Lecture 2 Chapter 3: Raw Materials and Pyrochemical Mineralogy of Portland Cement — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Di...

Module 3 • Subtopic 2•27,335 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 3 Assessment: Raw Materials and Pyrochemical Mineralogy of Portland Cement

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 3: Raw Materials and Pyrochemical Mineralogy of Portland Cement. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Kinetics of Cement Hydration and C-S-H Gel Microstructure: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 4 • Lecture 1 Chapter 4: Kinetics of Cement Hydration and C-S-H Gel Microstructure — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN Sta...

Module 4 • Subtopic 1•17,830 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Kinetics of Cement Hydration and C-S-H Gel Microstructure: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 4 • Lecture 2 Chapter 4: Kinetics of Cement Hydration and C-S-H Gel Microstructure — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Direc...

Module 4 • Subtopic 2•25,133 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 4 Assessment: Kinetics of Cement Hydration and C-S-H Gel Microstructure

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 4: Kinetics of Cement Hydration and C-S-H Gel Microstructure. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Electrochemistry of Metal Oxidation and Rebar Corrosion: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 5 • Lecture 1 Chapter 5: Electrochemistry of Metal Oxidation and Rebar Corrosion — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN Stand...

Module 5 • Subtopic 1•17,830 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Electrochemistry of Metal Oxidation and Rebar Corrosion: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 5 • Lecture 2 Chapter 5: Electrochemistry of Metal Oxidation and Rebar Corrosion — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directi...

Module 5 • Subtopic 2•25,135 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 5 Assessment: Electrochemistry of Metal Oxidation and Rebar Corrosion

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 5: Electrochemistry of Metal Oxidation and Rebar Corrosion. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Chloride Ingress, Carbonation, and Sulfate Attack in Concrete: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 6 • Lecture 1 Chapter 6: Chloride Ingress, Carbonation, and Sulfate Attack in Concrete — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN...

Module 6 • Subtopic 1•17,725 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Chloride Ingress, Carbonation, and Sulfate Attack in Concrete: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 6 • Lecture 2 Chapter 6: Chloride Ingress, Carbonation, and Sulfate Attack in Concrete — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design D...

Module 6 • Subtopic 2•27,188 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 6 Assessment: Chloride Ingress, Carbonation, and Sulfate Attack in Concrete

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 6: Chloride Ingress, Carbonation, and Sulfate Attack in Concrete. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Polymer Admixtures, Superplasticizers, and Setting Retarders: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 7 • Lecture 1 Chapter 7: Polymer Admixtures, Superplasticizers, and Setting Retarders — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode / BS EN...

Module 7 • Subtopic 1•17,718 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Polymer Admixtures, Superplasticizers, and Setting Retarders: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 7 • Lecture 2 Chapter 7: Polymer Admixtures, Superplasticizers, and Setting Retarders — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Di...

Module 7 • Subtopic 2•25,018 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 7 Assessment: Polymer Admixtures, Superplasticizers, and Setting Retarders

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 7: Polymer Admixtures, Superplasticizers, and Setting Retarders. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 105 • 100L • Materials Science Chapter 8 • Lecture 1 Chapter 8: Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) • NUC-CCMAS-ENG-CHM101 • COREN-FND-CHM-01 • Eurocode /...

Module 8 • Subtopic 1•17,732 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity: Applied Engineering Computation, Design & Verification

CVE 105 • 100L • Materials Science Chapter 8 • Lecture 2 Chapter 8: Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & Des...

Module 8 • Subtopic 2•25,026 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 105 Ch 8 Assessment: Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 105 Chapter 8: Environmental Water Chemistry: Hardness, Alkalinity, and Turbidity. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 105: General Chemistry for Civil Engineers (Construction Chemistry & Hydration)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 105: General Chemistry for Civil Engineers (Construction Chemistry & Hydration).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 105: General Chemistry for Civil Engineers (Construction Chemistry & Hydration) | PAMCET University — B.Eng | PAMCET