Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 314: Hydraulics & Water Resources Laboratory

Hands-on laboratory testing: calibration of flow meters (venturi and orifice), verification of Bernoulli's energy equation, pipe friction and minor loss determination, flow over rectangular and V-notch weirs, open-channel flume hydraulic jumps, and pump performance curves.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Hands-on laboratory testing: calibration of flow meters (venturi and orifice), verification of Bernoulli's energy equation, pipe friction and minor loss determination, flow over rectangular and V-notch weirs, open-channel flume hydraulic jumps, and pump performance...

What You'll Learn

  • Verify the Bernoulli energy conservation theorem experimentally along a converging-diverging venturi duct.
  • Determine discharge coefficients for venturi meters, orifice plates, and variable area rotameters.
  • Measure Darcy-Weisbach friction factors across smooth and rough pipes and compare with the Moody diagram.
  • Quantify minor head loss coefficients (K-values) across pipe elbows, gate valves, expansions, and contractions.
  • Investigate subcritical, critical, and supercritical flow regimes and measure hydraulic jump energy dissipation in an open flume.

Requirements

  • Laboratory coat, water-resistant footwear, and scientific calculator.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 1 • Lecture 1 Chapter 1: Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode...

Module 1 • Subtopic 1•17,486 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 1 • Lecture 2 Chapter 1: Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Managemen...

Module 1 • Subtopic 2•25,787 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 1 Assessment: Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 1: Hydraulics Laboratory Safety, Calibration of Manometer Boards, and Gravimetric Volumetric Tanks. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Experimental Verification of Bernoulli's Theorem in a Variable Duct Section: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 2 • Lecture 1 Chapter 2: Experimental Verification of Bernoulli's Theorem in a Variable Duct Section — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode / BS EN Standar...

Module 2 • Subtopic 1•17,968 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Experimental Verification of Bernoulli's Theorem in a Variable Duct Section: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 2 • Lecture 2 Chapter 2: Experimental Verification of Bernoulli's Theorem in a Variable Duct Section — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied En...

Module 2 • Subtopic 2•27,472 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 2 Assessment: Experimental Verification of Bernoulli's Theorem in a Variable Duct Section

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 2: Experimental Verification of Bernoulli's Theorem in a Variable Duct Section. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 3 • Lecture 1 Chapter 3: Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode / BS EN Sta...

Module 3 • Subtopic 1•17,408 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 3 • Lecture 2 Chapter 3: Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applie...

Module 3 • Subtopic 2•26,908 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 3 Assessment: Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 3: Calibration of Differential Flow Meters: Venturi Meter and Sharp-Edged Orifice Plate. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 4 • Lecture 1 Chapter 4: Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode / BS...

Module 4 • Subtopic 1•17,674 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 4 • Lecture 2 Chapter 4: Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 4 • Subtopic 2•27,168 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 4 Assessment: Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 4: Measurement of Frictional Head Losses in Pressurized Pipes and Moody Friction Verification. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 5 • Lecture 1 Chapter 5: Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode / BS EN...

Module 5 • Subtopic 1•17,438 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 5 • Lecture 2 Chapter 5: Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. App...

Module 5 • Subtopic 2•25,747 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 5 Assessment: Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 5: Experimental Determination of Minor Head Losses in Pipe Bends, Contractions, and Valves. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 6 • Lecture 1 Chapter 6: Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode /...

Module 6 • Subtopic 1•17,446 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 6 • Lecture 2 Chapter 6: Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management...

Module 6 • Subtopic 2•26,936 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 6 Assessment: Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 6: Flow Over Sharp-Crested Weirs: Rectangular Suppressed/Contracted Weirs and 90-Degree V-Notches. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 7 • Lecture 1 Chapter 7: Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode / BS...

Module 7 • Subtopic 1•17,450 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 7 • Lecture 2 Chapter 7: Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 7 • Subtopic 2•26,943 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 7 Assessment: Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 7: Open-Channel Flume Investigation: Sluice Gate Discharge and Hydraulic Jump Conjugate Depths. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 314 • 300L • Water Resources & Hydraulics Chapter 8 • Lecture 1 Chapter 8: Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Hydraulics & Water Resources Laboratory • NUC-CCMAS-CVE-314 • COREN-CVE-LAB-03 • Eurocode /...

Module 8 • Subtopic 1•17,254 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits: Applied Engineering Computation, Design & Verification

CVE 314 • 300L • Water Resources & Hydraulics Chapter 8 • Lecture 2 Chapter 8: Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management...

Module 8 • Subtopic 2•26,038 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 314 Ch 8 Assessment: Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 314 Chapter 8: Centrifugal Pump Characteristic Curves: Head vs. Discharge, Efficiency, and Cavitation Limits. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 314: Hydraulics & Water Resources Laboratory
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 314: Hydraulics & Water Resources Laboratory.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.