Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 303: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs)

Philosophy of limit state design (Eurocode 2 / BS 8110 / ACI 318), partial safety factors, ultimate flexural capacity of singly and doubly reinforced rectangular/T-beams, shear reinforcement (stirrups), bond/anchorage, and one-way suspended slabs.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Philosophy of limit state design (Eurocode 2 / BS 8110 / ACI 318), partial safety factors, ultimate flexural capacity of singly and doubly reinforced rectangular/T-beams, shear reinforcement (stirrups), bond/anchorage, and one-way suspended slabs. Curriculum Structure & Core...

What You'll Learn

  • Formulate design ultimate and serviceability load combinations using partial safety factors (Eurocode 2 / BS 8110).
  • Calculate ultimate resistance moment and required longitudinal reinforcement for singly and doubly reinforced beams.
  • Design flanged T-beams and L-beams accounting for effective flange widths in monolithic slab systems.
  • Size transverse shear links (stirrups) to prevent diagonal shear tension failure and verify concrete crushing limits.
  • Design solid one-way spanning reinforced concrete slabs including bar curtailment, crack control, and deflection checks.

Requirements

  • Pass in CVE 205, CVE 206, and CVE 211.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CV...

Module 1 • Subtopic 1•17,493 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 1 • Subtopic 2•25,742 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 1 Assessment: Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 1: Limit State Design Philosophy: Ultimate (ULS) and Serviceability (SLS) Limit States, Partial Factors of Safety. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318 — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 •...

Module 2 • Subtopic 1•18,171 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318 — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 2 • Subtopic 2•27,599 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 2 Assessment: Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 2: Constitutive Material Models for Concrete and Reinforcing Steel in Eurocode 2 / BS 8110 / ACI 318. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 • COR...

Module 3 • Subtopic 1•17,929 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Ap...

Module 3 • Subtopic 2•27,360 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 3 Assessment: Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 3: Flexural Behavior and Stress Block Parameters: Singly Reinforced Rectangular Concrete Sections. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 &bul...

Module 4 • Subtopic 1•17,567 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management...

Module 4 • Subtopic 2•27,125 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 4 Assessment: Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 4: Doubly Reinforced Rectangular Beams: Compression Steel Yielding and Over-Reinforced Ductility Checks. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 • COREN-CVE-STR-...

Module 5 • Subtopic 1•17,692 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engin...

Module 5 • Subtopic 2•28,145 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 5 Assessment: Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 5: Flanged Sections: T-Beam and L-Beam Effective Flange Widths, Neutral Axis Scenarios. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCM...

Module 6 • Subtopic 1•18,005 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality...

Module 6 • Subtopic 2•27,415 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 6 Assessment: Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 6: Shear Resistance in Reinforced Concrete: Diagonal Tension, Concrete Capacity, Variable Strut Angle, and Link Sizing. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 &b...

Module 7 • Subtopic 1•17,482 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manageme...

Module 7 • Subtopic 2•26,476 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 7 Assessment: Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 7: Bond, Anchorage, Lap Lengths, Curtailment of Bars, and Serviceability Cracking/Deflection Verification. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 303 • 300L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs) • NUC-CCMAS-CVE-303 • C...

Module 8 • Subtopic 1•17,774 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices: Applied Engineering Computation, Design & Verification

CVE 303 • 300L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 8 • Subtopic 2•28,214 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 303 Ch 8 Assessment: Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 303 Chapter 8: Analysis and Design of Solid One-Way Spanning Suspended Slabs and Structural Detailing Practices. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 303: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 303: Reinforced Concrete Design I (Limit State Principles, Beams & One-Way Slabs).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.