Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 403: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs)

Short and slender reinforced concrete columns under uniaxial and biaxial bending, column interaction charts, continuous building frames, redistribution of moments, two-way solid slabs, flat slabs with punching shear, and staircase design (Eurocode 2 / BS 8110).

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Short and slender reinforced concrete columns under uniaxial and biaxial bending, column interaction charts, continuous building frames, redistribution of moments, two-way solid slabs, flat slabs with punching shear, and staircase design (Eurocode 2 / BS 8110). Curriculum...

What You'll Learn

  • Classify reinforced concrete columns as short or slender, and compute additional second-order moments.
  • Design short and slender rectangular and circular columns under axial load and uniaxial/biaxial bending.
  • Analyze continuous building frames and execute permitted moment redistribution up to code limits (30%).
  • Design two-way spanning solid slabs on flexible and rigid beam supports using Marcus and yield-line coefficients.
  • Design beamless flat slabs, verify critical punching shear perimeters around columns, and detail drop panels/shear heads.

Requirements

  • Pass in CVE 303.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110 — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403...

Module 1 • Subtopic 1•18,012 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110 — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk M...

Module 1 • Subtopic 2•27,433 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 1 Assessment: Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 1: Behavior of Concrete Compression Members, Effective Heights, and Slenderness Criteria in Eurocode 2 / BS 8110. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403 • COREN...

Module 2 • Subtopic 1•17,781 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 2 • Subtopic 2•28,225 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 2 Assessment: Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 2: Design of Short Columns Under Axial Load and Uniaxial Bending: Non-Dimensional Interaction Charts. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403 •...

Module 3 • Subtopic 1•17,837 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Managem...

Module 3 • Subtopic 2•28,275 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 3 Assessment: Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 3: Design of Columns Subject to Biaxial Bending: Equivalent Uniaxial Methods and Rigorous Section Analysis. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403...

Module 4 • Subtopic 1•17,801 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 4 • Subtopic 2•28,232 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 4 Assessment: Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 4: Design of Slender Columns: Second-Order Geometric Imperfections, P-Delta Effects, and Nominal Curvature Method. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403 &b...

Module 5 • Subtopic 1•17,974 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Man...

Module 5 • Subtopic 2•27,397 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 5 Assessment: Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 5: Analysis and Moment Redistribution in Continuous Concrete Frames: Plastic Hinges and Ductility Requirements. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403 &bull...

Module 6 • Subtopic 1•17,769 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manage...

Module 6 • Subtopic 2•28,206 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 6 Assessment: Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 6: Design of Two-Way Spanning Solid Slabs: Edge Conditions, Torsion Restraint, and Code Moment Coefficients. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-403 &bu...

Module 7 • Subtopic 1•17,831 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Mana...

Module 7 • Subtopic 2•28,266 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 7 Assessment: Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 7: Design of Flat Slabs: Direct Design Method, Equivalent Frame Method, and Column/Middle Strip Distributions. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 403 • 400L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) • NUC-CCMAS-CVE-40...

Module 8 • Subtopic 1•18,002 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing: Applied Engineering Computation, Design & Verification

CVE 403 • 400L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 8 • Subtopic 2•27,421 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 403 Ch 8 Assessment: Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 403 Chapter 8: Punching Shear in Flat Slabs: Critical Control Perimeters, Column Heads, and Shear Stud Reinforcement Detailing. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 403: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 403: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 403: Reinforced Concrete Design II (Columns, Continuous Frames & Flat Slabs) | PAMCET University — B.Eng | PAMCET