Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 313: Soil Mechanics & Geotechnical Laboratory I

Hands-on laboratory testing of soils: moisture content, specific gravity (pycnometer), wet/dry sieve gradation, hydrometer sedimentation, Atterberg limits (Casagrande and cone penetrometer), Proctor compaction, and falling/constant head permeability.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Hands-on laboratory testing of soils: moisture content, specific gravity (pycnometer), wet/dry sieve gradation, hydrometer sedimentation, Atterberg limits (Casagrande and cone penetrometer), Proctor compaction, and falling/constant head permeability. Curriculum Structure & Core...

What You'll Learn

  • Perform mechanical sieve analysis and hydrometer sedimentation to determine complete soil particle distribution curves.
  • Determine liquid limit, plastic limit, and plasticity index using standard Casagrande apparatus and fall-cone devices.
  • Conduct standard Proctor laboratory compaction tests to establish compaction curves, MDD, and OMC.
  • Measure saturated hydraulic conductivity of cohesive and cohesionless soil specimens using permeameters.
  • Synthesize raw geotechnical laboratory data into standardized engineering soil classification test reports.

Requirements

  • Laboratory coat, safety shoes, and geotechnical laboratory kit.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 1 • Lecture 1 Chapter 1: Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS...

Module 1 • Subtopic 1•17,439 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 1 • Lecture 2 Chapter 1: Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. App...

Module 1 • Subtopic 2•25,741 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 1 Assessment: Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 1: Soil Laboratory Safety Protocols, Sample Disturbance, Preparation, and Riffle Box Splitting. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 2 • Lecture 1 Chapter 2: Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS...

Module 2 • Subtopic 1•17,627 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 2 • Lecture 2 Chapter 2: Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. App...

Module 2 • Subtopic 2•26,221 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 2 Assessment: Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 2: Moisture Content Determination (Oven-Drying Method) and Specific Gravity via Density Bottle. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 3 • Lecture 1 Chapter 3: Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS EN Standards / ASTM...

Module 3 • Subtopic 1•17,759 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 3 • Lecture 2 Chapter 3: Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sco...

Module 3 • Subtopic 2•27,247 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 3 Assessment: Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 3: Mechanical Particle Size Distribution: Wet Sieve and Dry Sieve Analysis. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 4 • Lecture 1 Chapter 4: Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS EN Stand...

Module 4 • Subtopic 1•17,417 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 4 • Lecture 2 Chapter 4: Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Eng...

Module 4 • Subtopic 2•25,727 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 4 Assessment: Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 4: Fine-Grained Hydrometer Analysis for Silt and Clay Fractions using Stokes' Law. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 5 • Lecture 1 Chapter 5: Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS EN Standards...

Module 5 • Subtopic 1•17,195 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 5 • Lecture 2 Chapter 5: Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Enginee...

Module 5 • Subtopic 2•25,990 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 5 Assessment: Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 5: Liquid Limit Determination via Casagrande Cup Method and Fall-Cone Penetrometer. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 6 • Lecture 1 Chapter 6: Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS EN Standards / ASTM...

Module 6 • Subtopic 1•17,147 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 6 • Lecture 2 Chapter 6: Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sco...

Module 6 • Subtopic 2•25,950 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 6 Assessment: Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 6: Plastic Limit and Linear Shrinkage Determination for Fine-Grained Soils. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 7 • Lecture 1 Chapter 7: Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS EN...

Module 7 • Subtopic 1•17,607 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 7 • Lecture 2 Chapter 7: Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applie...

Module 7 • Subtopic 2•26,204 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 7 Assessment: Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 7: Standard Proctor Compaction Test: Curve Plotting, Zero Air Voids Line, and Field Targets. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 313 • 300L • Geotechnical Engineering Chapter 8 • Lecture 1 Chapter 8: Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics & Geotechnical Laboratory I • NUC-CCMAS-CVE-313 • COREN-CVE-LAB-02 • Eurocode / BS...

Module 8 • Subtopic 1•17,649 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens: Applied Engineering Computation, Design & Verification

CVE 313 • 300L • Geotechnical Engineering Chapter 8 • Lecture 2 Chapter 8: Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Ap...

Module 8 • Subtopic 2•26,242 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 313 Ch 8 Assessment: Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 313 Chapter 8: Constant Head and Falling Head Permeability Testing of Cohesionless and Silty Soil Specimens. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 313: Soil Mechanics & Geotechnical Laboratory I
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 313: Soil Mechanics & Geotechnical Laboratory I.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.