Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 305: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage)

Soil origin, three-phase soil diagram, void ratio, porosity, water content, degree of saturation, Atterberg limits, soil classification (USCS and AASHTO), Proctor compaction, Darcy's law, permeability, two-dimensional seepage, and flow net construction.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Soil origin, three-phase soil diagram, void ratio, porosity, water content, degree of saturation, Atterberg limits, soil classification (USCS and AASHTO), Proctor compaction, Darcy's law, permeability, two-dimensional seepage, and flow net construction. Curriculum Structure &...

What You'll Learn

  • Derive and apply three-phase volumetric and gravimetric soil phase relationships.
  • Classify coarse and fine-grained soils using USCS and AASHTO systems from sieve and Atterberg limit data.
  • Interpret standard and modified Proctor compaction curves to determine optimum moisture content (OMC) and maximum dry density (MDD).
  • Calculate hydraulic conductivity of soils using constant head, falling head, and empirical grain-size equations.
  • Construct two-dimensional seepage flow nets beneath dams and sheet piles to compute seepage flux and exit hydraulic gradients.

Requirements

  • Pass in CVE 207.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 1 • Lecture 1 Chapter 1: Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 • COREN-CVE-GEO-02 &bu...

Module 1 • Subtopic 1•17,593 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 1 • Lecture 2 Chapter 1: Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engin...

Module 1 • Subtopic 2•26,169 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 1 Assessment: Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 1: Origin of Soils, Soil Formation, Particle Size Distributions, and Clay Mineralogy. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 2 • Lecture 1 Chapter 2: Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 • COREN-CVE-...

Module 2 • Subtopic 1•17,589 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 2 • Lecture 2 Chapter 2: Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. App...

Module 2 • Subtopic 2•26,155 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 2 Assessment: Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 2: Weight-Volume Relationships: Three-Phase Soil Diagram, Void Ratio, Porosity, and Saturation. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 3 • Lecture 1 Chapter 3: Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 &bull...

Module 3 • Subtopic 1•17,653 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 3 • Lecture 2 Chapter 3: Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manag...

Module 3 • Subtopic 2•26,207 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 3 Assessment: Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 3: Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Shrinkage Limit), and Plasticity Chart. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 4 • Lecture 1 Chapter 4: Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145 — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 • COR...

Module 4 • Subtopic 1•17,695 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 4 • Lecture 2 Chapter 4: Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145 — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management...

Module 4 • Subtopic 2•26,254 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 4 Assessment: Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 4: Engineering Soil Classification Systems: Unified Soil Classification System (USCS) and AASHTO M145. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 5 • Lecture 1 Chapter 5: Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-...

Module 5 • Subtopic 1•17,683 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 5 • Lecture 2 Chapter 5: Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality R...

Module 5 • Subtopic 2•26,228 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 5 Assessment: Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 5: Soil Compaction: Mechanics, Standard and Modified Proctor Tests, Field Compaction Equipment, and Quality Control. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 6 • Lecture 1 Chapter 6: Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 • CO...

Module 6 • Subtopic 1•17,530 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 6 • Lecture 2 Chapter 6: Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Managemen...

Module 6 • Subtopic 2•26,533 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 6 Assessment: Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 6: Soil Water Principles: Capillarity, Effective Stress Concept, Pore Water Pressure, and Total Stress. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 7 • Lecture 1 Chapter 7: Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-305 &bu...

Module 7 • Subtopic 1•17,768 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 7 • Lecture 2 Chapter 7: Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Man...

Module 7 • Subtopic 2•28,205 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 7 Assessment: Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 7: Permeability and Darcy's Law: Constant Head, Falling Head Permeameters, and Stratified Soil Aquifers. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 305 • 300L • Geotechnical Engineering Chapter 8 • Lecture 1 Chapter 8: Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage) • NUC-CCMAS-CVE-...

Module 8 • Subtopic 1•17,772 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure: Applied Engineering Computation, Design & Verification

CVE 305 • 300L • Geotechnical Engineering Chapter 8 • Lecture 2 Chapter 8: Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality R...

Module 8 • Subtopic 2•28,202 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 305 Ch 8 Assessment: Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 305 Chapter 8: Two-Dimensional Seepage Theory: Laplace Equation, Flow Nets, Seepage Discharge, Uplift Force, and Piping Failure. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 305: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 305: Soil Mechanics I (Phase Relations, Compaction, Permeability & Seepage).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.