Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 205: Strength of Materials I (Stress, Strain & Axial-Torsional Loading)

Concepts of stress and strain, axial deformation, thermal stresses, Poisson's ratio, generalized Hooke's law, torsion of circular shafts, and thin-walled pressure vessels.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Concepts of stress and strain, axial deformation, thermal stresses, Poisson's ratio, generalized Hooke's law, torsion of circular shafts, and thin-walled pressure vessels. Curriculum Structure & Core Modules: • 1. Introduction to Deformable Body Mechanics: Concept of Stress and...

What You'll Learn

  • Compute normal and shear stresses under axial and direct shear loadings.
  • Determine mechanical strains, lateral contractions, and volumetric changes using Poisson's ratio.
  • Analyze statically indeterminate axially loaded structural members and thermal stress build-up.
  • Calculate torsional shear stresses, polar moments of inertia, and angles of twist in circular shafts.
  • Determine circumferential hoop and longitudinal stresses in thin-walled pressure vessels and pipes.

Requirements

  • Pass in CVE 101 and CVE 103.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Eur...

Module 1 • Subtopic 1•17,462 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineer...

Module 1 • Subtopic 2•26,488 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 1 Assessment: Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 1: Introduction to Deformable Body Mechanics: Concept of Stress and Types of Stress. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Eur...

Module 2 • Subtopic 1•17,390 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineer...

Module 2 • Subtopic 2•26,416 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 2 Assessment: Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 2: Normal Strain, Shear Strain, Stress-Strain Diagrams, and Elastic Proportionality. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Axial Deformation in Homogeneous and Stepped Structural Members: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Axial Deformation in Homogeneous and Stepped Structural Members — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Eurocode / BS EN Sta...

Module 3 • Subtopic 1•17,516 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Axial Deformation in Homogeneous and Stepped Structural Members: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Axial Deformation in Homogeneous and Stepped Structural Members — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Scope & D...

Module 3 • Subtopic 2•26,559 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 3 Assessment: Axial Deformation in Homogeneous and Stepped Structural Members

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 3: Axial Deformation in Homogeneous and Stepped Structural Members. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Statically Indeterminate Axially Loaded Structures and Compatibility Equations: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Statically Indeterminate Axially Loaded Structures and Compatibility Equations — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Euroc...

Module 4 • Subtopic 1•17,567 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Statically Indeterminate Axially Loaded Structures and Compatibility Equations: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Statically Indeterminate Axially Loaded Structures and Compatibility Equations — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineerin...

Module 4 • Subtopic 2•27,298 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 4 Assessment: Statically Indeterminate Axially Loaded Structures and Compatibility Equations

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 4: Statically Indeterminate Axially Loaded Structures and Compatibility Equations. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Euroc...

Module 5 • Subtopic 1•17,390 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineerin...

Module 5 • Subtopic 2•26,418 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 5 Assessment: Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 5: Thermal Stresses, Temperature-Induced Deformations, and Pre-Stressing Concepts. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 &bu...

Module 6 • Subtopic 1•17,437 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied E...

Module 6 • Subtopic 2•25,719 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 6 Assessment: Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 6: Generalized Hooke's Law, Multiaxial Stress, Poisson's Ratio, and Bulk Modulus. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 •...

Module 7 • Subtopic 1•17,690 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engi...

Module 7 • Subtopic 2•28,152 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 7 Assessment: Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 7: Torsion of Circular Solid and Hollow Shafts: Elastic Shear Stress and Angle of Twist. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 205 • 200L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Strength of Materials I (Stress, Strain & Axial-Torsional Loading) • NUC-CCMAS-CVE-201 • COREN-CVE-STR-01 • Eurocode...

Module 8 • Subtopic 1•17,434 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels: Applied Engineering Computation, Design & Verification

CVE 205 • 200L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering S...

Module 8 • Subtopic 2•26,465 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 205 Ch 8 Assessment: Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 205 Chapter 8: Membrane Stresses in Thin-Walled Cylindrical and Spherical Pressure Vessels. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 205: Strength of Materials I (Stress, Strain & Axial-Torsional Loading)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 205: Strength of Materials I (Stress, Strain & Axial-Torsional Loading).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.