Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 304: Structural Steel Design I (Tension, Compression Members & Connections)

Design of structural steel buildings and trusses (Eurocode 3 / BS 5950 / AISC 360), cross-section classification (Classes 1-4), tension members, column buckling curves, laterally restrained beams, bolted and welded shear/moment connections.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Design of structural steel buildings and trusses (Eurocode 3 / BS 5950 / AISC 360), cross-section classification (Classes 1-4), tension members, column buckling curves, laterally restrained beams, bolted and welded shear/moment connections. Curriculum Structure & Core...

What You'll Learn

  • Classify hot-rolled structural steel cross-sections into Classes 1 to 4 based on local flange/web plate slenderness.
  • Design structural tension members accounting for net effective area, shear lag, and block shear tear-out.
  • Design axially loaded steel compression columns considering flexural buckling, effective lengths, and buckling curves.
  • Verify moment resistance and shear capacity of laterally restrained universal beams (UB) under bending.
  • Design bolted shear connections and fillet/butt welded connections to transmit structural member forces.

Requirements

  • Pass in CVE 205, CVE 206, and CVE 210.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 • CO...

Module 1 • Subtopic 1•17,561 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Managemen...

Module 1 • Subtopic 2•27,124 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 1 Assessment: Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 1: Steel Design Codes (Eurocode 3 EN 1993-1-1 / BS 5950 / AISC 360) and Partial Safety Factors for Steel. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 •...

Module 2 • Subtopic 1•17,525 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Managem...

Module 2 • Subtopic 2•27,086 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 2 Assessment: Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 2: Local Buckling of Steel Plates, Width-to-Thickness Slenderness Ratios, and Cross-Section Classification. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 • COREN...

Module 3 • Subtopic 1•17,513 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1...

Module 3 • Subtopic 2•27,079 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 3 Assessment: Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 3: Design of Tension Members: Gross Area Yielding, Net Section Rupture, Shear Lag, and Block Tear-Out. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 • COREN-...

Module 4 • Subtopic 1•17,539 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1....

Module 4 • Subtopic 2•27,106 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 4 Assessment: Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 4: Theory of Column Buckling: Euler Critical Load, Initial Imperfections, and Column Buckling Curves. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 •...

Module 5 • Subtopic 1•17,586 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manage...

Module 5 • Subtopic 2•26,584 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 5 Assessment: Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 5: Design of Axially Loaded Compression Members: Effective Lengths, Slenderness, and Compressive Resistance. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304 &bul...

Module 6 • Subtopic 1•17,593 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Mana...

Module 6 • Subtopic 2•27,151 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 6 Assessment: Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 6: Design of Laterally Restrained Beams: Bending Moment Resistance, Shear Capacity, and Web Crushing/Buckling. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-30...

Module 7 • Subtopic 1•17,549 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 7 • Subtopic 2•27,101 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 7 Assessment: Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 7: Design of Bolted Connections: Standard and High-Strength Friction Grip (HSFG) Bolts, Shear, Bearing, and Tension. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 304 • 300L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel Design I (Tension, Compression Members & Connections) • NUC-CCMAS-CVE-304...

Module 8 • Subtopic 1•17,583 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing: Applied Engineering Computation, Design & Verification

CVE 304 • 300L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 8 • Subtopic 2•27,137 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 304 Ch 8 Assessment: Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 304 Chapter 8: Design of Welded Connections: Fillet Welds, Full Penetration Butt Welds, Throat Thickness, and Joint Detailing. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 304: Structural Steel Design I (Tension, Compression Members & Connections)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 304: Structural Steel Design I (Tension, Compression Members & Connections).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.