Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 503: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames)

Design of steel-concrete composite beams, shear connectors (headed studs), plate girders (web shear buckling, tension field action, stiffeners), single-storey pitched-roof portal frames, plastic collapse analysis, and heavy structural timber trusses and glulam beams.

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Design of steel-concrete composite beams, shear connectors (headed studs), plate girders (web shear buckling, tension field action, stiffeners), single-storey pitched-roof portal frames, plastic collapse analysis, and heavy structural timber trusses and glulam beams. Curriculum...

What You'll Learn

  • Design steel-concrete composite beams with profiled steel decking and size headed shear stud connectors.
  • Design welded steel plate girders, sizing intermediate transverse and longitudinal stiffeners against web shear buckling.
  • Apply plastic collapse mechanism analysis to evaluate plastic moment capacity and load factors for pitched portal frames.
  • Design pitched portal frame haunched eaves and apex moment connections, baseplates, and holding-down bolts.
  • Design structural glued-laminated (glulam) timber beams and heavy timber connections (split-rings, toothed plates).

Requirements

  • Pass in CVE 304.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 1 • Lecture 1 Chapter 1: Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360 — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NUC-CCMAS-...

Module 1 • Subtopic 1•17,929 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 1 • Lecture 2 Chapter 1: Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360 — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Manage...

Module 1 • Subtopic 2•27,342 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 1 Assessment: Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 1: Composite Steel-Concrete Construction: Principles, Degree of Shear Connection, and Eurocode 4 / AISC 360. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 2 • Lecture 1 Chapter 2: Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NUC-...

Module 2 • Subtopic 1•17,868 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 2 • Lecture 2 Chapter 2: Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk...

Module 2 • Subtopic 2•28,286 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 2 Assessment: Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 2: Design of Simply Supported Composite Beams: Plastic Moment Resistance, Effective Widths, and Deflection Checks. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 3 • Lecture 1 Chapter 3: Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NUC-C...

Module 3 • Subtopic 1•18,003 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 3 • Lecture 2 Chapter 3: Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk M...

Module 3 • Subtopic 2•27,411 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 3 Assessment: Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 3: Shear Connectors: Headed Stud Resistance, Transverse Reinforcement for Shear, and Profiled Decking Influences. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 4 • Lecture 1 Chapter 4: Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) &bul...

Module 4 • Subtopic 1•17,615 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 4 • Lecture 2 Chapter 4: Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Qualit...

Module 4 • Subtopic 2•27,148 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 4 Assessment: Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 4: Design of Welded Steel Plate Girders: Flange Sizing, Web Slenderness, Shear Buckling, and Tension Field Post-Buckling. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 5 • Lecture 1 Chapter 5: Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NUC-CCMA...

Module 5 • Subtopic 1•18,007 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 5 • Lecture 2 Chapter 5: Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Mana...

Module 5 • Subtopic 2•27,418 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 5 Assessment: Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 5: Intermediate Transverse Web Stiffeners, Bearing Stiffeners, and Web Opening Reinforcement in Plate Girders. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 6 • Lecture 1 Chapter 6: Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NU...

Module 6 • Subtopic 1•17,571 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 6 • Lecture 2 Chapter 6: Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 6 • Subtopic 2•27,109 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 6 Assessment: Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 6: Plastic Analysis and Design of Portal Frames: Plastic Hinges, Shape Factors, Lower/Upper Bound Collapse Theorems. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 7 • Lecture 1 Chapter 7: Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NU...

Module 7 • Subtopic 1•17,581 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 7 • Lecture 2 Chapter 7: Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 7 • Subtopic 2•27,119 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 7 Assessment: Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 7: Portal Frame Detailing: Haunched Eaves Connections, Apex Joints, Column Bases, Wind Girders, and Bracing Systems. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 503 • 500L • Structural Engineering Chapter 8 • Lecture 1 Chapter 8: Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) • NU...

Module 8 • Subtopic 1•17,846 characters of authentic academic content
Subtopic 2Document LectureOpen Access~34 min read

Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance: Applied Engineering Computation, Design & Verification

CVE 503 • 500L • Structural Engineering Chapter 8 • Lecture 2 Chapter 8: Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Ris...

Module 8 • Subtopic 2•28,262 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 503 Ch 8 Assessment: Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 503 Chapter 8: Advanced Timber Engineering: Glulam Beams, Mechanically Laminated Timber, Timber Connectors, and Fire Resistance. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 503: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 503: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CVE 503: Structural Steel & Timber Design II (Composite Beams, Plate Girders & Portal Frames) | PAMCET University — B.Eng | PAMCET