Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

CVE 111: Workshop Practice & Construction Crafts

Hands-on safety, carpentry, formwork fabrication, rebar bending, masonry laying, plumbing fittings, and workshop tool operations.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Hands-on safety, carpentry, formwork fabrication, rebar bending, masonry laying, plumbing fittings, and workshop tool operations. Curriculum Structure & Core Modules: • 1. Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction • 2. Benchwork, Hand Tools,...

What You'll Learn

  • Demonstrate adherence to personal protective equipment (PPE) and occupational workshop safety protocols.
  • Operate hand and machine tools for benchwork, sawing, drilling, and metal filing.
  • Fabricate timber formwork and falsework joints for concrete casting.
  • Cut, bend, and tie structural reinforcing steel rebar in accordance with bar bending schedules.
  • Lay basic brick and blockwork bonds with mortared joints and level plumb lines.

Requirements

  • Safety boots, protective goggles, and workshop overalls.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 1 • Lecture 1 Chapter 1: Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standards / A...

Module 1 • Subtopic 1•17,341 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 1 • Lecture 2 Chapter 1: Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering...

Module 1 • Subtopic 2•25,659 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 1 Assessment: Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 1: Occupational Health, Safety Regulations (OSHA/HSE), and PPE in Construction. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 2 • Lecture 1 Chapter 2: Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standards / ASTM...

Module 2 • Subtopic 1•17,293 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 2 • Lecture 2 Chapter 2: Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering Sco...

Module 2 • Subtopic 2•27,055 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 2 Assessment: Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 2: Benchwork, Hand Tools, Precision Measuring Instruments, and Marking Out. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 3 • Lecture 1 Chapter 3: Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standards...

Module 3 • Subtopic 1•17,287 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 3 • Lecture 2 Chapter 3: Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineer...

Module 3 • Subtopic 2•27,042 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 3 Assessment: Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 3: Carpentry Shop: Timber Selection, Joints, Formwork, and Shuttering Fabrication. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 4 • Lecture 1 Chapter 4: Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standards / AS...

Module 4 • Subtopic 1•17,255 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 4 • Lecture 2 Chapter 4: Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering...

Module 4 • Subtopic 2•27,014 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 4 Assessment: Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 4: Machine Tools: Drilling, Turning, Grinding, and Safe Power Tool Operations. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 5 • Lecture 1 Chapter 5: Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standar...

Module 5 • Subtopic 1•17,363 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 5 • Lecture 2 Chapter 5: Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engin...

Module 5 • Subtopic 2•26,974 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 5 Assessment: Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 5: Metal Fabrication: Cutting, Oxy-Acetylene Welding, and Shielded Metal Arc Welding. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 6 • Lecture 1 Chapter 6: Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standards / AS...

Module 6 • Subtopic 1•17,727 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 6 • Lecture 2 Chapter 6: Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engineering...

Module 6 • Subtopic 2•27,212 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 6 Assessment: Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 6: Reinforcement Craft: Bar Bending, Hook Detailing, Spacers, and Rebar Tying. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 7 • Lecture 1 Chapter 7: Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standard...

Module 7 • Subtopic 1•17,315 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 7 • Lecture 2 Chapter 7: Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engine...

Module 7 • Subtopic 2•27,068 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 7 Assessment: Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 7: Masonry and Bricklaying: Mortar Mixing, Stretcher/English Bonds, and Plumb Lines. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing: Theoretical Foundations, Continuum Mechanics & Architecture

CVE 111 • 100L • Construction Engineering Chapter 8 • Lecture 1 Chapter 8: Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing — Theoretical Foundations, Continuum Mechanics & Structural Architecture Curriculum Alignment: Workshop Practice & Construction Crafts • NUC-CCMAS-ENG-WKS101 • COREN-ENG-WKS-01 • Eurocode / BS EN Standard...

Module 8 • Subtopic 1•17,283 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing: Applied Engineering Computation, Design & Verification

CVE 111 • 100L • Construction Engineering Chapter 8 • Lecture 2 Chapter 8: Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing — Applied Engineering Computation, Design Verification & Protocols Applied Engineering Computations • Numerical Simulation Models • Laboratory Testing SOPs • FMEA Quality Risk Management 1. Applied Engine...

Module 8 • Subtopic 2•27,036 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

CVE 111 Ch 8 Assessment: Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Formative engineering mastery assessment for CVE 111 Chapter 8: Plumbing and Pipe Fitting: Galvanized Iron, PVC, Soldering, and Pressure Testing. Tests theoretical mechanisms, governing equations, and worked calculation procedures.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CVE 111: Workshop Practice & Construction Crafts
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CVE 111: Workshop Practice & Construction Crafts.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.