Skip to main content
B.Sc. DegreeFaculty of Faculty of Medical, Health & Clinical SciencesDentistry

Higher National Diploma (HND) in Dental Technology: Advanced Prosthodontics & Orthodontics (NBTE Standards)

An advanced professional Higher National Diploma curriculum in dental technology covering fixed prosthodontics (metal-ceramic copings, CAD/CAM), removable partial dentures (cobalt-chromium cast frameworks), and orthodontic appliance fabrication.

Instructor
Created by PAMCET Learning Team
advanced1 weekEnglish

Course Overview

An advanced professional Higher National Diploma curriculum in dental technology covering fixed prosthodontics (metal-ceramic copings, CAD/CAM), removable partial dentures (cobalt-chromium cast frameworks), and orthodontic appliance fabrication. Curriculum Structure & Core...

Degree Programme Curriculum Context

This course is a curriculum unit of the B.Sc. Dentistry degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
12 Chapters
•
36 Lecture
•
0s
Subtopic 1Document LectureOpen Access~38 min read

Dental Laboratory Quality Management Systems (ISO 13485), Medical Device Regulations & CPN/DTRBN Ethics

Higher National Diploma (HND) Dental Technology Chapter 1: Advanced Laboratory Management & Regulatory Standards Dental Laboratory Quality Management Systems (ISO 13485), Medical Device Regulations & CPN/DTRBN Ethics Engineering quality governance, regulatory compliance under the Dental Technologists Registration Board of Nigeria (DTRBN Act Cap D6), medical device harmonization (ISO 13485:...

Module 1 • Subtopic 1•32,094 characters of authentic academic content
Subtopic 2Document Lecture

Laboratory Cost Accounting, Material Inventory Control & Workflow Optimization in Commercial Laboratories

Higher National Diploma (HND) Dental Technology Chapter 1: Advanced Laboratory Management & Regulatory Standards Laboratory Cost Accounting, Material Inventory Control & Workflow Optimization in Commercial Laboratories Managerial cost accounting methodologies, Activity-Based Costing (ABC) for prosthetic units, Economic Order Quantity (EOQ) inventory physics, computerized batch tracking, an...

Module 1 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Laboratory Production Overhead Calculations, Unit Cost Formulation & Quality Assurance Checklists

Higher National Diploma (HND) Dental Technology Chapter 1: Advanced Laboratory Management & Regulatory Standards Summative Problem Set: Laboratory Production Overhead Calculations, Unit Cost Formulation & Quality Assurance Checklists Advanced mathematical laboratory engineering problem set: Break-even volume models, predetermined overhead allocation rate equations, multi-stage QA audit met...

Module 1 • Subtopic 3
Subtopic 1Document Lecture

Crown and Bridge Terminology: Abutments, Retainers, Pontics & Connectors (Ante's Law Formulation)

Higher National Diploma (HND) Dental Technology Chapter 2: Fixed Prosthodontics Design & Coping Geometry Crown and Bridge Terminology: Abutments, Retainers, Pontics & Connectors (Ante's Law Formulation) Biomechanical engineering of Fixed Partial Dentures (FPD): Structural physics of abutments, retainers, pontics, and connectors, mathematical formulation of Ante's Law root surface areas, an...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

Tooth Preparation Margin Designs: Chamfer, Shoulder, Knife-Edge & Working Die Systems (Pindex / Solid Cast)

Higher National Diploma (HND) Dental Technology Chapter 2: Fixed Prosthodontics Design & Coping Geometry Tooth Preparation Margin Designs: Chamfer, Shoulder, Knife-Edge & Working Die Systems (Pindex / Solid Cast) Engineering geometry of tooth preparation finish lines, stress concentration mechanics of chamfer vs shoulder vs feather-edge margins, precision working die systems (Pindex, Di-Lo...

Module 2 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Ante's Law Root Surface Area Calculations, Pontic Span Deflection Equations & Die Relief Spacers

Higher National Diploma (HND) Dental Technology Chapter 2: Fixed Prosthodontics Design & Coping Geometry Summative Problem Set: Ante's Law Root Surface Area Calculations, Pontic Span Deflection Equations & Die Relief Spacers Advanced computational laboratory engineering: Pericemental surface area summations, structural beam deflection models, die spacer thickness calibrations, and cement l...

Module 2 • Subtopic 3
Subtopic 1Document Lecture

Dental Casting Alloys: Nickel-Chromium (Ni-Cr), Cobalt-Chromium (Co-Cr), Gold Alloys & Phase Diagrams

Higher National Diploma (HND) Dental Technology Chapter 3: Dental Casting Metallurgy & Investments Dental Casting Alloys: Ni-Cr, Co-Cr, High Noble Systems & Physical Metallurgy Advanced physical metallurgy of dental restorative alloys: ADA and ISO 22674 classifications, binary and ternary phase diagrams, liquidus-solidus intervals, chromium passivation kinetics (Cr2O_3), beryllium toxicity...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Wax Pattern Spruing, Phosphate-Bonded Investment Chemistry, Burnout Furnace Thermal Expansions & Centrifugal Casting

Higher National Diploma (HND) Dental Technology Chapter 3: Dental Casting Metallurgy & Investments Wax Pattern Spruing, Phosphate-Bonded Investment Chemistry & Induction Casting Engineering protocols for precision crown and bridge casting: fluid metal aerodynamics, Chvorinov's solidification law, phosphate-bonded investment (PBI) chemistry, silica cristobalite/quartz displacive inversions,...

Module 3 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Casting Thermal Shrinkage Compensation, Sprue Reservoir Volume Calculations & Burnout Temperature Ramp Rates

Higher National Diploma (HND) Dental Technology Chapter 3: Dental Casting Metallurgy & Investments Summative Problem Set: Casting Thermal Shrinkage Compensation, Sprue Sizing & Burnout Thermokinetics Worked engineering problems and mathematical derivations: net casting shrinkage compensation equations, Chvorinov modulus computations, colloidal silica dilution ratios, and multi-stage burnou...

Module 3 • Subtopic 3
Subtopic 1Document Lecture

Ceramic-Alloy Bonding Mechanics: Chemical (Oxide Layer), Mechanical Interlocking & Coefficient of Thermal Expansion (CTE)

Higher National Diploma (HND) Dental Technology Chapter 4: Dental Ceramics & Metal-Ceramics Ceramic-Alloy Bonding Mechanics: Chemical Oxide Bonding & Thermal Compatibility Interface science of metal-ceramic restorations: mechanical interlocking, van der Waals forces, chemical covalent bonding via transition element oxides (In2O_3, SnO2, Cr2O_3), coefficient of thermal expansion (CTE) match...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

Dental Porcelain Application: Opaque, Dentin, Enamel Powders, Condensation Techniques & Vacuum Firing Cycles

Higher National Diploma (HND) Dental Technology Chapter 4: Dental Ceramics & Metal-Ceramics Dental Porcelain Application: Layering, Condensation Physics & Vacuum Sintering Advanced laboratory ceramic buildup techniques: feldspathic composition (leucite crystal reinforcement KAlSi2O_6), opaque application, dentin/enamel anatomical layering, condensation fluid mechanics (capillary, ultrasoni...

Module 4 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: CTE Thermal Mismatch Stress Calculations, Ceramic Shrinkage Volumetric Sizing & Glazing Temperature Controls

Higher National Diploma (HND) Dental Technology Chapter 4: Dental Ceramics & Metal-Ceramics Summative Problem Set: CTE Thermal Mismatch Stress, Firing Shrinkage & Fracture Toughness Worked engineering problems in restorative materials science: thermal expansion mismatch stress equations (\sigma = E \Delta \alpha \Delta T), three-dimensional firing shrinkage volumetric compensation, Griffit...

Module 4 • Subtopic 3
Subtopic 1Document Lecture

Kennedy Classification of Partially Edentulous Arches (Class I-IV) & Applegate's Modification Rules

Higher National Diploma (HND) Dental Technology Chapter 5: RPD Frameworks & Surveying Kennedy Classification & Biomechanical Rationale of RPD Component Design Biomechanical foundations of removable partial dentures: Kennedy classification and Applegate's eight governing rules, support mechanisms (tooth vs tooth-and-mucosa), Class I lever mechanics in distal extension bases, the RPI concept...

Module 5 • Subtopic 1
Subtopic 2Document Lecture

Dental Surveyor Mechanics: Determining Path of Insertion, Survey Lines, Guiding Planes & Undercut Depths (0.010, 0.020 inch)

Higher National Diploma (HND) Dental Technology Chapter 5: RPD Frameworks & Surveying Dental Surveyor Mechanics: Determining Path of Insertion & Undercut Analysis Engineering principles of dental surveying: resolving path of insertion and withdrawal, analyzing rod versus carbon marker, surveying tools (0.010", 0.020", 0.030" undercut gauges, wax trimming knife), guiding plane preparation p...

Module 5 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: RPD Clasp Flexibility Calculations, Rest Seat Depth Formulation & Major Connector Rigidity Profiling

Higher National Diploma (HND) Dental Technology Chapter 5: RPD Frameworks & Surveying Summative Problem Set: RPD Clasp Flexibility Mechanics, Cantilever Deflection & Survey Geometry Worked engineering problems in partial denture biomechanics: cantilever beam deflection equations (D \propto L3 / E b t3), clasp taper mechanics, survey tilt trigonometric derivations, and retention force quant...

Module 5 • Subtopic 3
Subtopic 1Document Lecture

Master Cast Block-Out, Relief Waxing, Agar-Agar / Silicone Duplication & Refractory Cast Production

Higher National Diploma (HND) Dental Technology Chapter 6: RPD Duplication & Casting Master Cast Block-Out, Relief Waxing & Agar / Silicone Duplication Physics Step-by-step master cast preparation: parallel, arbitrary, and ledged blockout protocols, relief wax calibration for meshwork and major connectors, reversible hydrocolloid (agar) thermal conditioning cycles, addition silicone duplic...

Module 6 • Subtopic 1
Subtopic 2Document Lecture

Wax Pattern Adaptation for Clasps (Akers, Roach), Major Connectors (Lingual Bar, Palatal Strap) & High-Frequency Induction Casting

Higher National Diploma (HND) Dental Technology Chapter 6: RPD Duplication & Casting Wax Pattern Adaptation for Clasps, Major Connectors & RPD Spruing Systems Removable partial denture framework fabrication: preformed plastic pattern adaptation, Akers (circumferential) vs Roach (infrabulge) clasp arms, major connector waxing protocols, maxillary palatal beading mechanics, external and inte...

Module 6 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Electrolytic Polishing Current Density Calculations, High-Speed Finishing & Master Cast Fit Verification

Higher National Diploma (HND) Dental Technology Chapter 6: RPD Duplication & Casting Summative Problem Set: Electrolytic Polishing Current Density & Refractory Expansion Math Worked engineering problems in cobalt-chromium casting finishing: Faraday's laws of electrolysis, anodic dissolution current density (J = I/A), sulfuric-phosphoric acid electrolyte kinetics, and refractory cast settin...

Module 6 • Subtopic 3
Subtopic 1Document Lecture

Orthodontic Stainless Steel Wire Metallurgy: Work Hardening, Resilience, Elastic Limit & Stress-Strain Behavior

Higher National Diploma (HND) Dental Technology Chapter 7: Orthodontic Appliance Technology Orthodontic Stainless Steel Wire Metallurgy: Work Hardening, Resilience & Stress-Strain Dynamics Metallurgical foundations of austenitic 18-8 stainless steel orthodontic wires: face-centered cubic crystal lattice, dislocation entanglement and cold-drawing mechanics, low-temperature stress relief anneali...

Module 7 • Subtopic 1
Subtopic 2Document Lecture

Fabrication of Removable Orthodontic Components: Adams Clasps, Hawley Labial Bows, Finger Springs & Acrylic Baseplates

Higher National Diploma (HND) Dental Technology Chapter 7: Orthodontic Appliance Technology Fabrication of Removable Orthodontic Components: Adams Clasps, Labial Bows & Acrylic Baseplates Engineering protocols for removable orthodontic appliances: anatomy and step-by-step plier manipulation of the Adams clasp, Hawley labial bows and canine U-loops, guarded cantilever finger springs, salt-and-p...

Module 7 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Orthodontic Cantilever Spring Force Delivery Calculations, Deflection Rate Equations & Expansion Screw Pitch

Higher National Diploma (HND) Dental Technology Chapter 7: Orthodontic Appliance Technology Summative Problem Set: Orthodontic Cantilever Spring Force Delivery & Expansion Screw Pitch Rigorous biomechanical calculations in orthodontic appliance engineering: cantilever deflection equations (F = 3 \pi E d4 \delta / 64 L3), fourth-power wire diameter sensitivity, load-deflection rate reduction th...

Module 7 • Subtopic 3
Subtopic 1Document Lecture

Digital Dental Workflow: Intraoral / Desktop Optical Scanning, STL Mesh Processing & CAD Restoration Modeling

Higher National Diploma (HND) Dental Technology Chapter 8: Digital Dental Technology & Capstone Digital Dental Workflow: Optical 3D Scanning, STL Mesh Processing & CAD Modeling Engineering foundations of digital prosthodontics: optical triangulation and structured blue-light scanning physics, point clouds and Delaunay triangulation, STL/OBJ/PLY data architectures, mesh inspection and defec...

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Subtractive Manufacturing (5-Axis Zirconia Milling) vs Additive Manufacturing (SLA / DLP Resin 3D Printing)

Higher National Diploma (HND) Dental Technology Chapter 8: Digital Dental Technology & Capstone Subtractive Manufacturing (5-Axis CNC Milling) vs. Additive Manufacturing (SLA/DLP 3D Printing) Engineering comparison of subtractive versus additive fabrication in dental laboratories: 5-axis CNC kinematics, tool path CAM nesting, zirconia presintered green-state machining and sintering shrinkage c...

Module 8 • Subtopic 2
Subtopic 3Document Lecture

Summative Capstone Review: Full-Arch Cast Metal-Ceramic Restoration Specification & HND Technical Viva Voce Defense

Higher National Diploma (HND) Dental Technology Chapter 8: Digital Dental Technology & Capstone Summative Capstone Review: Full-Arch Prosthodontic Specification & HND Technical Viva Voce Defense Comprehensive laboratory capstone synthesis: architectural design and quality standards for a 14-unit full-arch metal-ceramic bridge with precision attachments, international standards compliance (...

Module 8 • Subtopic 3
Subtopic 1Document Lecture

Extra-Oral Maxillofacial Defects: Etiology, Anatomical Landmarks & Medical-Grade Silicone Elastomers (MDX4-4210)

Higher National Diploma (HND) Dental Technology Chapter 9: Maxillofacial Prosthetics I Extra-Oral Maxillofacial Defects: Etiology, Anatomical Landmarks & Medical-Grade Silicone Elastomers (MDX4-4210) Advanced laboratory science of extra-oral maxillofacial rehabilitation: oncologic, traumatic, and congenital etiologies, surface craniofacial landmarks, condensation versus addition cure organosil...

Module 9 • Subtopic 1
Subtopic 2Document Lecture

Impression Techniques, Anatomical Sculpting & Intrinsic/Extrinsic Color Matching for Auricular and Nasal Prostheses

Higher National Diploma (HND) Dental Technology Chapter 9: Maxillofacial Prosthetics I Impression Techniques, Anatomical Sculpting & Intrinsic/Extrinsic Color Matching for Auricular and Nasal Prostheses Clinical and laboratory workflows in extra-oral facial restoration: mucostatic facial moulage impression protocols, donor-cast mirroring, sculptural anatomical morphology of the pinna and nose,...

Module 9 • Subtopic 2
Subtopic 3Document Lecture

Retention Systems for Extra-Oral Prostheses: Craniofacial Implants, Bar-Clip Attachments & Medical Adhesives

Higher National Diploma (HND) Dental Technology Chapter 9: Maxillofacial Prosthetics I Retention Systems for Extra-Oral Prostheses: Craniofacial Implants, Bar-Clip Attachments & Medical Adhesives Engineering foundations of extra-oral prosthetic retention: biological fixation via osseointegrated extra-oral titanium implants, bar-clip superstructure splinting, neodymium-iron-boron hermetic magne...

Module 9 • Subtopic 3
Subtopic 1Document Lecture

Maxillectomy Defects (Aramany Classification) & Feeding/Surgical Obturator Laboratory Fabrication

Higher National Diploma (HND) Dental Technology Chapter 10: Maxillofacial Prosthetics II Maxillectomy Defects (Aramany Classification) & Feeding/Surgical Obturator Laboratory Fabrication Biomechanics and fabrication of intra-oral maxillary obturators: Aramany classification of oncologic palate defects (Classes I through VI), presurgical planning, immediate surgical obturators, delayed feeding...

Module 10 • Subtopic 1
Subtopic 2Document Lecture

Definitive Hollow Bulb Obturator Construction: Weight Reduction Mechanics, Salt/Ice Core Techniques & Acoustic Resonance

Higher National Diploma (HND) Dental Technology Chapter 10: Maxillofacial Prosthetics II Definitive Hollow Bulb Obturator Construction: Weight Reduction Mechanics, Salt/Ice Core Techniques & Acoustic Resonance Advanced laboratory construction of definitive maxillary obturators: biomechanical gravitational mass mitigation, structural physics of cantilever torque, two-piece indexing versus lost-...

Module 10 • Subtopic 2
Subtopic 3Document Lecture

Palatal Speech Aids & Pharyngeal Bulbs for Cleft Palate Velopharyngeal Incompetence

Higher National Diploma (HND) Dental Technology Chapter 10: Maxillofacial Prosthetics II Palatal Speech Aids & Pharyngeal Bulbs for Cleft Palate Velopharyngeal Incompetence Prosthetic rehabilitation of velopharyngeal dysfunction: anatomical etiology of cleft palate, distinction between velopharyngeal incompetence (VPI) and insufficiency (VPD), palatal lift prostheses (PLP), pharyngeal speech b...

Module 10 • Subtopic 3
Subtopic 1Document Lecture

Dental Implant Laboratory Principles: Analogues, Impression Copings & Passive Fit Biomechanics

Higher National Diploma (HND) Dental Technology Chapter 11: Dental Implant Suprastructures Dental Implant Laboratory Principles: Analogues, Impression Copings & Passive Fit Biomechanics Precision laboratory protocols in implant prosthodontics: open-tray versus closed-tray transfer copings, implant analogue positioning, resilient peri-implant soft tissue gingival masks, screw joint preload phys...

Module 11 • Subtopic 1
Subtopic 2Document Lecture

Screw-Retained vs. Cement-Retained Implant Bridges & Custom Titanium/Zirconia Abutment Milling Protocols

Higher National Diploma (HND) Dental Technology Chapter 11: Dental Implant Suprastructures Screw-Retained vs. Cement-Retained Implant Bridges & Custom Titanium/Zirconia Abutment Milling Protocols Engineering analysis of prosthetic retention modalities in fixed implant prosthodontics: retrievability versus occlusal integrity, subgingival cement extrusion hazards, peri-implantitis pathogenesis,...

Module 11 • Subtopic 2
Subtopic 3Document Lecture

All-on-4 / All-on-6 Full-Arch Fixed Hybrid Frameworks & Titanium Substructure Laser Welding

Higher National Diploma (HND) Dental Technology Chapter 11: Dental Implant Suprastructures All-on-4 / All-on-6 Full-Arch Fixed Hybrid Frameworks & Titanium Substructure Laser Welding Engineering foundations of full-arch edentulous implant rehabilitation: tilted implant biomechanics (30^\circ-45^\circ), anterior-posterior (AP) spread dynamics, cantilever stress limits, CNC milled Grade 5 titani...

Module 11 • Subtopic 3
Subtopic 1Document Lecture

Classification & Physics of Precision Attachments: Extracoronal vs. Intracoronal Mechanisms & Frictional Resistance

Higher National Diploma (HND) Dental Technology Chapter 12: Precision Attachments & Telescopic Systems Classification & Physics of Precision Attachments: Extracoronal vs. Intracoronal Mechanisms & Frictional Resistance Engineering science of dental precision attachments: morphological classification (intracoronal vs. extracoronal, rigid vs. resilient), frictional physics, normal force...

Module 12 • Subtopic 1
Subtopic 2Document Lecture

Laboratory Placement and Servicing of Stud & Bar Overdenture Attachments (Locator, Dolder Bar, Hader Bar)

Higher National Diploma (HND) Dental Technology Chapter 12: Precision Attachments & Telescopic Systems Laboratory Placement and Servicing of Stud & Bar Overdenture Attachments (Locator, Dolder Bar, Hader Bar) Advanced laboratory construction of implant- and tooth-supported overdentures: stud systems (Locator dual retention), splinted bar mechanics (Dolder oval/pear versus Hader round bars)...

Module 12 • Subtopic 2
Subtopic 3Document Lecture

Telescopic Double Crowns: Primary/Secondary Coping Friction, Taper Angles (0° to 2°) & Parallelometer Milling

Higher National Diploma (HND) Dental Technology Chapter 12: Precision Attachments & Telescopic Systems Telescopic Double Crowns: Primary/Secondary Coping Friction, Taper Angles (0° to 2°) & Parallelometer Milling Advanced engineering of telescopic double crowns in removable prosthodontics: cylindrical (0^\circ) versus conical (1^\circ-6^\circ) tapers, wedging effect mechanics, parallelomet...

Module 12 • Subtopic 3

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
Higher National Diploma (HND) in Dental Technology: Advanced Prosthodontics & Orthodontics (NBTE Standards)
Free100% Off
Certificate available separately for $7 after completion

Course Includes

12 Chapters
36 Lectures
1 week
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Dentistry
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for Higher National Diploma (HND) in Dental Technology: Advanced Prosthodontics & Orthodontics (NBTE Standards).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.