Skip to main content
B.Sc. DegreeFaculty of Faculty of Medical, Health & Clinical SciencesDentistry

National Diploma (ND) in Dental Technology (NBTE Curriculum Standards)

An accredited 2-year National Diploma curriculum governed by NBTE and Dental Technologists Registration Board standards, covering dental material science, complete denture prosthetics, model preparation, and acrylic processing.

Instructor
Created by PAMCET Learning Team
advanced1 weekEnglish

Course Overview

An accredited 2-year National Diploma curriculum governed by NBTE and Dental Technologists Registration Board standards, covering dental material science, complete denture prosthetics, model preparation, and acrylic processing. Curriculum Structure & Core Modules: • 1....

Degree Programme Curriculum Context

This course is a curriculum unit of the B.Sc. Dentistry degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
10 Chapters
•
30 Lecture
•
0s
Subtopic 1Document LectureOpen Access~25 min read

Scope of Dental Technology, Professional Ethics & Regulatory Standards (NBTE / DTRBN)

National Diploma (ND) Dental Technology Chapter 1: Laboratory Safety & Plaster Chemistry Dental Laboratory Safety, Occupational Health & Safety (OHS), Hazard Communication & PPE Protocols Statutory mandate and occupational biosecurity: Dental Technologists Registration Board of Nigeria (DTRBN) regulations, OSHA hazard communication standards, particulate silica pneumoconiosis preventio...

Module 1 • Subtopic 1•20,877 characters of authentic academic content
Subtopic 2Document Lecture

Dental Laboratory Hazards, Dust Extraction, Eye Safety, Chemical Handling & Safe Lathe Operations

National Diploma (ND) Dental Technology Chapter 1: Laboratory Safety & Plaster Chemistry Dental Plaster & Stone Chemistry: Calcium Sulfate Hemihydrate (Type I-V Gypsum), Water-Powder Ratios & Setting Expansion Chemical thermodynamics and crystal kinetics of gypsum: Calcination reactions of calcium sulfate dihydrate, alpha versus beta hemihydrate crystal morphology, nucleation theories,...

Module 1 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Laboratory Ventilation Flow Calculations, Safety Compliance Auditing & Waste Handling

National Diploma (ND) Dental Technology Chapter 1: Laboratory Safety & Plaster Chemistry Summative Problem Set: Gypsum Water-Powder Stoichiometry, Setting Expansion Percentage & Compressive Strength Calculations Worked quantitative problems in dental materials engineering: Water-powder stoichiometry derivations, setting expansion percentage formulations, wet versus dry compressive strength...

Module 1 • Subtopic 3
Subtopic 1Document Lecture

Gypsum Chemistry: Plaster of Paris, Dental Stone, Die Stone (Types I-V) & Setting Expansion Kinetics

National Diploma (ND) Dental Technology Chapter 2: Impression Materials & Master Casts Primary & Master Cast Fabrication: Boxing Methods, Beading, Pouring & Trimming Criteria (Land Area, Base Dimensions) Definitive prosthetic cast engineering: Beading and boxing techniques, plaster-pumice matrices, preservation of peripheral sulcular rolls, land area dimensional criteria, base parallel...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

Dental Waxes & Impression Compounds: Baseplate Wax, Inlay Wax, Carving Waxes & Thermal Properties

National Diploma (ND) Dental Technology Chapter 2: Impression Materials & Master Casts Cast Inspection & Fault Rectification: Air Voids, Nodule Removal, Dimensional Distortion & Surface Hardness Testing Quality assurance in master cast production: Identification and remediation of gypsum defects, air bubbles, positive nodule excision protocols, alginate syneresis artifacts, surface cha...

Module 2 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Gypsum Water/Powder Ratio Calculations, Expansion Percentages & Thermal Contraction Offsets

National Diploma (ND) Dental Technology Chapter 2: Impression Materials & Master Casts Summative Problem Set: Cast Base Thickness Measurements, Angle of Cast Borders & Volumetric Expansion Error Derivations Worked quantitative laboratory calculations: Mathematical verification of master cast base dimensions, angle calculations on model trimmers, arch width contraction errors, and volumetri...

Module 2 • Subtopic 3
Subtopic 1Document Lecture

Anterior Tooth Morphology, Line Angles, Point Angles, Cingulum, Marginal Ridges & Esthetic Proportions

National Diploma (ND) Dental Technology Chapter 3: Custom Impression Trays & Record Rims Custom Impression Trays: Spacer Design, Border Molding Relief, Perforations & Material Handling Precision fabrication of individual impression trays: anatomical surveying, wax spacer geometry, tissue stops, border clearance rules, handle orientation, and material science comparison of shellac, self-cur...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Posterior Tooth Morphology: Cuspal Anatomy, Triangular Ridges, Fissures & Occlusal Tables

National Diploma (ND) Dental Technology Chapter 3: Custom Impression Trays & Record Rims Occlusal Record Rims: Maxillary & Mandibular Baseplate Fabrication, Contouring & VDO Fabrication of dimensionally stable baseplates, anatomical wax occlusal rim contouring, lip support geometry, Fox occlusal plane alignment, camper's line parallelism, and clinical determination of vertical dimensio...

Module 3 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Tooth Carving Dimension Measurements, Golden Proportion Calculations & Contouring Ratios

National Diploma (ND) Dental Technology Chapter 3: Custom Impression Trays & Record Rims Summative Problem Set: Tray Spacer Thickness, Wax Rim Angulation & Centric Relation Transfer Mathematical derivations and quantitative bench problems: tray spacer volumetric relief, wax rim angular vectors, centric relation indexing error propagation, and baseplate deflection mechanics. 1. Learning Obj...

Module 3 • Subtopic 3
Subtopic 1Document Lecture

Anatomical Landmarks of Edentulous Arches (Maxilla & Mandible): Retromolar Pad, Tuberosity & Sulci

National Diploma (ND) Dental Technology Chapter 4: Dental Articulators & Occlusal Geometry Articulators in Dental Technology: Simple Hinge, Mean-Value, Semi-Adjustable & Fully Adjustable Systems Classification, biomechanical principles, and mechanical anatomy of dental articulators: Class I simple hinge, Class II mean-value (Bonwill's triangle), Class III semi-adjustable (Arcon vs Non-Arco...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

Fabrication of Custom Impression Trays (Auto-Polymerizing & Light-Cured Resins) with Relief Spacers

National Diploma (ND) Dental Technology Chapter 4: Dental Articulators & Occlusal Geometry Facebow Transfer & Condylar Guidance: Kinematic vs Arbitrary Systems, Bennett Angle & Christensen's Phenomenon Biomechanical principles of the transverse horizontal axis: kinematic hinge axis locators versus arbitrary earbow systems, anterior reference points, condylar guidance path calibration,...

Module 4 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Tray Spacer Thickness Measurements, Handle Angulation & Master Beaded Cast Trimming

National Diploma (ND) Dental Technology Chapter 4: Dental Articulators & Occlusal Geometry Summative Problem Set: Condylar Guidance Calculations (Hanau Formula), Intercondylar Width & Biomechanical Geometry Mathematical formulations and worked laboratory problem sets: Hanau's rule derivation (L = H/8 + 12), Christensen's gap trigonometric calculation, intercondylar width effect on ridge-an...

Module 4 • Subtopic 3
Subtopic 1Document Lecture

Record Base Construction & Occlusal Rim Fabrication (Height, Width & Labial Inclination Specifications)

National Diploma (ND) Dental Technology Chapter 5: Tooth Arrangement & Occlusion Complete Denture Anterior Tooth Arrangement: Esthetics, Phonetics & Incisal Guidance Biomechanical and esthetic principles of anterior artificial tooth selection and setup: facial harmony laws (Leon Williams typology), incisal edge positioning, midline determination, canine alignment, smile line curvature, and...

Module 5 • Subtopic 1
Subtopic 2Document Lecture

Dental Articulators: Mean-Value (Free-Plane) vs Semi-Adjustable Articulators & Facebow Transfer Geometry

National Diploma (ND) Dental Technology Chapter 5: Tooth Arrangement & Occlusion Posterior Tooth Setup: Balanced Articulation, Compensating Curves & Hanau's Quint Biomechanical laws of bilateral balanced occlusion in edentulous prosthodontics: Hanau's Quint equation, compensating curves of Spee and Wilson, crossbite setups, non-anatomic monoplane occlusal concepts, and lingualized articula...

Module 5 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Bonwill's Triangle Calculations, Intercondylar Distance Vectors & Occlusal Plane Alignment

National Diploma (ND) Dental Technology Chapter 5: Tooth Arrangement & Occlusion Summative Problem Set: Occlusal Balance Vectors, Compensating Curve Radii & Tooth Proportions Worked biomechanical calculations and trigonometric derivations: Hanau Quint parameter balancing, compensating curve of Spee radius calculation, Golden Proportion (1.618) anterior width distributions, and lateral bala...

Module 5 • Subtopic 3
Subtopic 1Document Lecture

Anterior Tooth Selection (Form, Size, Shade) & Esthetic Alignment (Incisal Plane & Canine Guidance)

National Diploma (ND) Dental Technology Chapter 6: Denture Processing & Polymerization Denture Waxing, Festooning, Flasking & Investment Molding: Gypsum Metallurgy & Compression Packing Bench protocols for precision complete denture finishing: anatomical festooning, root prominences, stippling, three-pour flasking technique, dental plaster vs dental stone mold integrity, boil-out wax e...

Module 6 • Subtopic 1
Subtopic 2Document Lecture

Posterior Tooth Arrangement: Balanced Occlusion, Compensating Curves (Curve of Spee, Curve of Wilson)

National Diploma (ND) Dental Technology Chapter 6: Denture Processing & Polymerization PMMA Resin Chemistry, Dough Stage Kinetics, Curing Cycles & Porosity Prevention Polymer chemistry of polymethyl methacrylate: free-radical addition kinetics, four stages of doughing, long vs short curing cycles, exothermic thermal spike management (100.3^\circC MMA boiling threshold), gaseous vs contract...

Module 6 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: Horizontal/Vertical Overlap Angle Formulations, Occlusal Curve Arc Fitting & Wax Gingival Festooning

National Diploma (ND) Dental Technology Chapter 6: Denture Processing & Polymerization Summative Problem Set: Polymer-to-Monomer Stoichiometry, Thermal Kinetics & Monomer Leaching Worked stoichiometric and thermodynamic calculations: polymer-to-monomer mass ratios, volumetric polymerization shrinkage derivations, exothermic heat of polymerization calculations, and Fickian diffusion of resi...

Module 6 • Subtopic 3
Subtopic 1Document Lecture

Flasking Procedures: Split-Cast Method, Plaster Embedding & Wax Elimination (Boil-Out Technique)

National Diploma (ND) Dental Technology Chapter 7: Deflasking, Remounting & Repairs Deflasking, Laboratory Remounting & Selective Grinding: The BULL Rule & Finishing Systematic protocols for prosthetic retrieval and post-processing occlusal correction: nondestructive deflasking, laboratory split-cast remounting, processing error diagnosis, the classical BULL rule (Buccal Upper, Lingual...

Module 7 • Subtopic 1
Subtopic 2Document Lecture

Poly(methyl methacrylate) [PMMA] Polymerization: Monomer-Polymer Slurry Stages, Packing Pressure & Curing Cycles

National Diploma (ND) Dental Technology Chapter 7: Deflasking, Remounting & Repairs Denture Repairs, Relining & Rebasing: Cold-Cure PMMA, Joint Preparation & Pressure Curing Removable prosthesis maintenance engineering: midline fracture repair joint design (butt vs 45° bevel vs mechanical dovetails), chemical priming with methyl methacrylate, pressure vessel curing (hydroflask 30 psi /...

Module 7 • Subtopic 2
Subtopic 3Document Lecture

Summative Problem Set: PMMA Volumetric Contraction Calculations, Gaseous Porosity Prevention Cycles & Deflasking Invariants

National Diploma (ND) Dental Technology Chapter 7: Deflasking, Remounting & Repairs Summative Problem Set: Selective Grinding Derivations & Repair Tensile Strength Testing Worked engineering problems in prosthodontics: trigonometric pin elevation versus molar occlusal prematurity derivations, 3-point flexural strength equations under ISO 20795-1, joint fracture energy analysis, and repair...

Module 7 • Subtopic 3
Subtopic 1Document Lecture

Occlusal Remounting, Selective Grinding (BULL Rule) & Laboratory Polishing (Pumice, Whiting/Rouge)

National Diploma (ND) Dental Technology Chapter 8: RPDs & Orthodontic Appliances Removable Partial Denture (RPD) Laboratory Workflows: Diagnostic Casts & Surveying Principles Fundamentals of partially edentulous prosthodontics: Kennedy classification, Ney dental surveyor mechanics, determining path of insertion, analyzing rod vs carbon marker, undercut gauges (0.010", 0.020", 0.030"), guid...

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Denture Repair Mechanics: Fractured Bases, Tooth Replacement, Cold-Cure Acrylic Resins & Relining

National Diploma (ND) Dental Technology Chapter 8: RPDs & Orthodontic Appliances Custom Orthodontic Appliances: Hawley Retainer Fabrication, Wire Bending & Acrylic Adaptation Removable orthodontic appliance engineering: metallurgy of hard-drawn austenitic stainless steel wire (AISI 302/304), Adam's clasp bending mechanics (0.7 mm wire), labial bow with active U-loops (0.8 mm wire), salt-an...

Module 8 • Subtopic 2
Subtopic 3Document Lecture

Summative Capstone Review: Complete Mandibular & Maxillary Denture Fabrication Walkthrough & Viva Voce Defense

National Diploma (ND) Dental Technology Chapter 8: RPDs & Orthodontic Appliances Summative ND Capstone Examination: Complete Laboratory Synthesis & Practical Viva Defense Comprehensive capstone evaluation: synthesis of full dental laboratory production workflows, quality management systems (ISO 13485 / DTRBN regulations), troubleshooting multi-stage fabrication defects, and practical viva...

Module 8 • Subtopic 3
Subtopic 1Document Lecture

Principles of Immediate Dentures: Diagnostic Casts, Surgical Ridge Reduction & Flange Design

National Diploma (ND) Chapter 9: Immediate Dentures, Relining, Rebasing & Prosthetic Repairs Lecture 1 Principles of Immediate Dentures: Diagnostic Casts, Surgical Ridge Reduction & Flange Design A comprehensive dental technology manual on immediate complete dentures: anatomical diagnostic impressions, stone cast surgical trimming rules (Jerbi method), transparent surgical stent fabricatio...

Module 9 • Subtopic 1
Subtopic 2Document Lecture

Laboratory Techniques for Relining, Rebasing & Post-Insertion Occlusal Equilibration

National Diploma (ND) Chapter 9: Immediate Dentures, Relining, Rebasing & Prosthetic Repairs Lecture 2 Laboratory Techniques for Relining, Rebasing & Post-Insertion Occlusal Equilibration A technical manual on removable complete denture re-adaptation: differential diagnosis between relining and rebasing, jig mounting procedures (Hoover reline jig), laboratory flasking methodologies, heat-c...

Module 9 • Subtopic 2
Subtopic 3Document Lecture

Cold-Cure & Light-Cure Acrylic Denture Repair, Tooth Replacement & Fracture Mechanics

National Diploma (ND) Chapter 9: Immediate Dentures, Relining, Rebasing & Prosthetic Repairs Lecture 3 Cold-Cure & Light-Cure Acrylic Denture Repair, Tooth Replacement & Fracture Mechanics A comprehensive technical treatise on denture fracture mechanics: midline flexural fatigue, impact fractures, joint preparation bevel geometry (45-degree butt joint vs round bevel), chemical wetting,...

Module 9 • Subtopic 3
Subtopic 1Document Lecture

Classification of Orthodontic Appliances & Material Properties of Orthodontic Wires (Stainless Steel, NiTi)

National Diploma (ND) Chapter 10: Introduction to Orthodontic Technology & Wire Bending Biomechanics Lecture 1 Classification of Orthodontic Appliances & Material Properties of Orthodontic Wires (Stainless Steel, NiTi) A comprehensive dental technology guide to orthodontic wire metallurgy: austenitic 18-8 stainless steel, work hardening, nickel-titanium (NiTi) martensitic-austenitic phase...

Module 10 • Subtopic 1
Subtopic 2Document Lecture

Wire Bending Mechanics: Retentive Clasps (Adams, Southend), Labial Bows & Active Springs (Z-Spring, Finger Spring)

National Diploma (ND) Chapter 10: Introduction to Orthodontic Technology & Wire Bending Biomechanics Lecture 2 Wire Bending Mechanics: Retentive Clasps (Adams, Southend), Labial Bows & Active Springs (Z-Spring, Finger Spring) A laboratory manual on precision orthodontic wire bending: anatomy and step-by-step fabrication of Adams clasps, Southend clasps, Hawley short and long labial bows, c...

Module 10 • Subtopic 2
Subtopic 3Document Lecture

Fabrication of Removable Orthodontic Appliances: Acrylic Baseplate Processing, Cold-Cure vs. Heat-Cure & Finishing

National Diploma (ND) Chapter 10: Introduction to Orthodontic Technology & Wire Bending Biomechanics Lecture 3 Fabrication of Removable Orthodontic Appliances: Acrylic Baseplate Processing, Cold-Cure vs. Heat-Cure & Finishing A comprehensive dental technology guide to removable orthodontic appliance processing: sprinkle-on (salt-and-pepper) acrylic technique, dough molding, expansion screw...

Module 10 • Subtopic 3

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
National Diploma (ND) in Dental Technology (NBTE Curriculum Standards)
Free100% Off
Certificate available separately for $7 after completion

Course Includes

10 Chapters
30 Lectures
1 week
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Dentistry
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for National Diploma (ND) in Dental Technology (NBTE Curriculum Standards).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

National Diploma (ND) in Dental Technology (NBTE Curriculum Standards) — B.Sc. | PAMCET