Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 309: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID)

Open/closed-loop systems, dynamic modeling of electrical/mechanical systems, transfer functions, block diagram reduction, Routh-Hurwitz, root locus, and PID controllers.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Open/closed-loop systems, dynamic modeling of electrical/mechanical systems, transfer functions, block diagram reduction, Routh-Hurwitz, root locus, and PID controllers. Curriculum Structure & Core Modules: • 1. Introduction to Control Systems: Open-Loop vs. Closed-Loop...

What You'll Learn

  • Derive differential equations and Laplace transfer functions for electrical, mechanical, and electromechanical systems.
  • Simplify complex multiloop feedback systems using block diagram algebra and Mason's gain formula on signal flow graphs.
  • Analyze transient specifications (rise time, peak overshoot, settling time, steady-state error) for first- and second-order systems.
  • Determine closed-loop stability using Routh-Hurwitz criterion and sketch root locus diagrams to tune PID controller gains.

Requirements

  • Pass in EEE 201 and EEE 203.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 1 • Lecture 1 Chapter 1: Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-EE-CON-...

Module 1 • Subtopic 1•18,428 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 1 • Lecture 2 Chapter 1: Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engin...

Module 1 • Subtopic 2•25,461 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 1 Formative Assessment: Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Introduction to Control Systems: Open-Loop vs. Closed-Loop Feedback Control Architectures.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 2 • Lecture 1 Chapter 2: Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • CORE...

Module 2 • Subtopic 1•18,486 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 2 • Lecture 2 Chapter 2: Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Appl...

Module 2 • Subtopic 2•27,090 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 2 Formative Assessment: Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Mathematical Modeling of Physical Systems: Electrical, Mechanical, and DC Motor Transfer Functions.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule): Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 3 • Lecture 1 Chapter 3: Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule) — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-EE-C...

Module 3 • Subtopic 1•17,930 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule): Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 3 • Lecture 2 Chapter 3: Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule) — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied En...

Module 3 • Subtopic 2•27,435 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 3 Formative Assessment: Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Block Diagram Algebra, Canonical Form Reductions, and Signal Flow Graphs (Mason's Rule).

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 4 • Lecture 1 Chapter 4: Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-EE-CON-01 &bul...

Module 4 • Subtopic 1•17,865 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 4 • Lecture 2 Chapter 4: Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering...

Module 4 • Subtopic 2•24,695 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 4 Formative Assessment: Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Time-Domain Analysis: First-Order and Second-Order System Transient Step Responses.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Steady-State Error Analysis, Static Error Constants, and System Type Numbers: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 5 • Lecture 1 Chapter 5: Steady-State Error Analysis, Static Error Constants, and System Type Numbers — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-EE-CON-01 • IEE...

Module 5 • Subtopic 1•17,911 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Steady-State Error Analysis, Static Error Constants, and System Type Numbers: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 5 • Lecture 2 Chapter 5: Steady-State Error Analysis, Static Error Constants, and System Type Numbers — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope...

Module 5 • Subtopic 2•24,753 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 5 Formative Assessment: Steady-State Error Analysis, Static Error Constants, and System Type Numbers

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Steady-State Error Analysis, Static Error Constants, and System Type Numbers.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 6 • Lecture 1 Chapter 6: Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-E...

Module 6 • Subtopic 1•18,267 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 6 • Lecture 2 Chapter 6: Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied...

Module 6 • Subtopic 2•26,532 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 6 Formative Assessment: Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Stability Analysis of Linear Systems: Routh-Hurwitz Stability Criterion and Boundary Conditions.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 7 • Lecture 1 Chapter 7: The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-EE-CON-01 &b...

Module 7 • Subtopic 1•18,415 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 7 • Lecture 2 Chapter 7: The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineerin...

Module 7 • Subtopic 2•26,451 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 7 Formative Assessment: The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: The Root Locus Technique: Construction Rules, Breakaway Points, and Parameter Tuning.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules: Theoretical Foundations, Modeling & System Architecture

EEE 309 • 300L • Systems Engineering Chapter 8 • Lecture 1 Chapter 8: Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID) • NUC-CCMAS-ENG-EEE309 • COREN-...

Module 8 • Subtopic 1•17,836 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules: Applied Engineering Computation, Production & Verification

EEE 309 • 300L • Systems Engineering Chapter 8 • Lecture 2 Chapter 8: Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applie...

Module 8 • Subtopic 2•25,997 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 309 Ch 8 Formative Assessment: Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Proportional-Integral-Derivative (PID) Controller Architectures and Ziegler-Nichols Tuning Rules.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 309: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 309: Control Systems I (Modeling, Block Diagrams, Time/Frequency Domain & PID).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.