Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 304: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems)

Per-unit system calculations, distribution network topologies, symmetrical three-phase short-circuits, symmetrical components, and unsymmetrical fault analysis.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Per-unit system calculations, distribution network topologies, symmetrical three-phase short-circuits, symmetrical components, and unsymmetrical fault analysis. Curriculum Structure & Core Modules: • 1. The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit...

What You'll Learn

  • Convert power system impedances, voltages, and currents into normalized per-unit (p.u.) values on common base MVA/kV.
  • Calculate symmetrical three-phase fault currents, short-circuit MVA, and circuit breaker interrupting capacities.
  • Decompose unbalanced three-phase phasors into positive, negative, and zero sequence components using Fortescue theorem.
  • Solve single line-to-ground (SLG), line-to-line (L-L), and double line-to-ground (LLG) unsymmetrical network faults.

Requirements

  • Pass in EEE 303.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 1 • Lecture 1 Chapter 1: The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 &bull...

Module 1 • Subtopic 1•17,965 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 1 • Lecture 2 Chapter 1: The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied E...

Module 1 • Subtopic 2•24,768 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 1 Formative Assessment: The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: The Per-Unit System: Base Quantities, Conversion Formulas, and Per-Unit Impedance Diagrams.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 2 • Lecture 1 Chapter 2: Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 • C...

Module 2 • Subtopic 1•17,950 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 2 • Lecture 2 Chapter 2: Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engi...

Module 2 • Subtopic 2•24,759 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 2 Formative Assessment: Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Primary and Secondary Distribution Systems: Radial, Ring Main, and Interconnected Grids.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 3 • Lecture 1 Chapter 3: Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 • COREN-EE-PWR-0...

Module 3 • Subtopic 1•18,332 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 3 • Lecture 2 Chapter 3: Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope...

Module 3 • Subtopic 2•26,973 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 3 Formative Assessment: Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Distribution Substation Layouts, Transformers, Busbar Schemes, and Feeders.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 4 • Lecture 1 Chapter 4: Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304...

Module 4 • Subtopic 1•17,999 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 4 • Lecture 2 Chapter 4: Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. App...

Module 4 • Subtopic 2•24,790 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 4 Formative Assessment: Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Symmetrical Three-Phase Short-Circuit Faults: Subtransient, Transient, and Steady-State Currents.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Circuit Breaker Rating Selection: Making and Breaking Current Capacities: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 5 • Lecture 1 Chapter 5: Circuit Breaker Rating Selection: Making and Breaking Current Capacities — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 • COREN-EE-PWR-02...

Module 5 • Subtopic 1•17,875 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Circuit Breaker Rating Selection: Making and Breaking Current Capacities: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 5 • Lecture 2 Chapter 5: Circuit Breaker Rating Selection: Making and Breaking Current Capacities — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 5 • Subtopic 2•24,714 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 5 Formative Assessment: Circuit Breaker Rating Selection: Making and Breaking Current Capacities

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Circuit Breaker Rating Selection: Making and Breaking Current Capacities.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 6 • Lecture 1 Chapter 6: Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 • COREN...

Module 6 • Subtopic 1•18,089 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 6 • Lecture 2 Chapter 6: Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineer...

Module 6 • Subtopic 2•27,814 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 6 Formative Assessment: Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Symmetrical Components Theory: Fortescue's Theorem and Transformation Matrices.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 7 • Lecture 1 Chapter 7: Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG-EEE304 &b...

Module 7 • Subtopic 1•18,036 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 7 • Lecture 2 Chapter 7: Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applie...

Module 7 • Subtopic 2•24,833 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 7 Formative Assessment: Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Sequence Impedances and Sequence Networks of Generators, Transformers, and Transmission Lines.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults: Theoretical Foundations, Modeling & System Architecture

EEE 304 • 300L • Electrical Engineering Chapter 8 • Lecture 1 Chapter 8: Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems) • NUC-CCMAS-ENG...

Module 8 • Subtopic 1•18,032 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults: Applied Engineering Computation, Production & Verification

EEE 304 • 300L • Electrical Engineering Chapter 8 • Lecture 2 Chapter 8: Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management...

Module 8 • Subtopic 2•24,809 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 304 Ch 8 Formative Assessment: Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Analysis of Unsymmetrical Faults: Single Line-to-Ground, Line-to-Line, and Double Line-to-Ground Faults.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 304: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 304: Electric Power Systems II (Distribution Networks, Fault Analysis & Per-Unit Systems).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.