Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 313: Electrical & Electronics Laboratory II (Machines & Electronics Bench)

Hardware testing of single-phase transformers, DC shunt/series motors, op-amp active filters, Wien-bridge oscillators, and combinational logic systems.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Hardware testing of single-phase transformers, DC shunt/series motors, op-amp active filters, Wien-bridge oscillators, and combinational logic systems. Curriculum Structure & Core Modules: • 1. Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical...

What You'll Learn

  • Conduct open-circuit and short-circuit tests on a single-phase transformer and determine copper and iron losses.
  • Record load characteristics of a DC shunt motor and calculate torque and mechanical efficiency.
  • Implement second-order active low-pass and high-pass Sallen-Key filters and measure frequency response with an oscilloscope.
  • Construct Wien-bridge and RC phase-shift oscillators, measuring oscillation frequency and output harmonic distortion.

Requirements

  • Enrolled concurrently in EEE 301 and EEE 305.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 1 • Lecture 1 Chapter 1: Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 &bu...

Module 1 • Subtopic 1•18,321 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 1 • Lecture 2 Chapter 1: Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Enginee...

Module 1 • Subtopic 2•26,957 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 1 Formative Assessment: Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Electrical Machinery Safety, Lock-Out Tag-Out (LOTO), and Bench Electrical Protocols.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 2 • Lecture 1 Chapter 2: Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 &bul...

Module 2 • Subtopic 1•17,925 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 2 • Lecture 2 Chapter 2: Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineer...

Module 2 • Subtopic 2•24,757 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 2 Formative Assessment: Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Open-Circuit and Short-Circuit Parameter Determination of Single-Phase Transformers.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 3 • Lecture 1 Chapter 3: Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 &bu...

Module 3 • Subtopic 1•18,391 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 3 • Lecture 2 Chapter 3: Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Enginee...

Module 3 • Subtopic 2•27,027 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 3 Formative Assessment: Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Load Test on Single-Phase Transformer: Efficiency and Voltage Regulation Measurement.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Speed-Torque Characteristics of Separately Excited and Shunt DC Motors: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 4 • Lecture 1 Chapter 4: Speed-Torque Characteristics of Separately Excited and Shunt DC Motors — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 • IEEE-EE-LA...

Module 4 • Subtopic 1•18,271 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Speed-Torque Characteristics of Separately Excited and Shunt DC Motors: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 4 • Lecture 2 Chapter 4: Speed-Torque Characteristics of Separately Excited and Shunt DC Motors — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &am...

Module 4 • Subtopic 2•26,935 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 4 Formative Assessment: Speed-Torque Characteristics of Separately Excited and Shunt DC Motors

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Speed-Torque Characteristics of Separately Excited and Shunt DC Motors.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Speed Control of DC Motors via Armature Voltage and Field Flux Variation: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 5 • Lecture 1 Chapter 5: Speed Control of DC Motors via Armature Voltage and Field Flux Variation — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 • IEEE-EE-...

Module 5 • Subtopic 1•18,465 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Speed Control of DC Motors via Armature Voltage and Field Flux Variation: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 5 • Lecture 2 Chapter 5: Speed Control of DC Motors via Armature Voltage and Field Flux Variation — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 5 • Subtopic 2•27,125 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 5 Formative Assessment: Speed Control of DC Motors via Armature Voltage and Field Flux Variation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Speed Control of DC Motors via Armature Voltage and Field Flux Variation.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 6 • Lecture 1 Chapter 6: Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-L...

Module 6 • Subtopic 1•18,423 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 6 • Lecture 2 Chapter 6: Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applie...

Module 6 • Subtopic 2•25,452 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 6 Formative Assessment: Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Operational Amplifier Active Filter Characterization: Frequency Response and Cutoff Frequency.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Sinusoidal Oscillator Construction and Frequency Stability Measurements: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 7 • Lecture 1 Chapter 7: Sinusoidal Oscillator Construction and Frequency Stability Measurements — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 • IEEE-EE-L...

Module 7 • Subtopic 1•18,449 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Sinusoidal Oscillator Construction and Frequency Stability Measurements: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 7 • Lecture 2 Chapter 7: Sinusoidal Oscillator Construction and Frequency Stability Measurements — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &a...

Module 7 • Subtopic 2•25,522 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 7 Formative Assessment: Sinusoidal Oscillator Construction and Frequency Stability Measurements

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Sinusoidal Oscillator Construction and Frequency Stability Measurements.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements: Theoretical Foundations, Modeling & System Architecture

EEE 313 • 300L • Electrical Engineering Chapter 8 • Lecture 1 Chapter 8: Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Electrical & Electronics Laboratory II (Machines & Electronics Bench) • NUC-CCMAS-ENG-EEE311 • COREN-EE-LAB-02 • IEEE-E...

Module 8 • Subtopic 1•18,476 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements: Applied Engineering Computation, Production & Verification

EEE 313 • 300L • Electrical Engineering Chapter 8 • Lecture 2 Chapter 8: Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope...

Module 8 • Subtopic 2•25,543 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 313 Ch 8 Formative Assessment: Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Feedback Amplifier Gain Desensitivity and Harmonic Distortion Measurements.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 313: Electrical & Electronics Laboratory II (Machines & Electronics Bench)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 313: Electrical & Electronics Laboratory II (Machines & Electronics Bench).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

EEE 313: Electrical & Electronics Laboratory II (Machines & Electronics Bench) | PAMCET University — B.Eng | PAMCET