Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 214: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout)

Longitudinal design continuum milestone: circuit design workflow, schematic capture, component selection, PCB design in KiCad, and design for manufacturing.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Longitudinal design continuum milestone: circuit design workflow, schematic capture, component selection, PCB design in KiCad, and design for manufacturing. Curriculum Structure & Core Modules: • 1. The Engineering Design Process: Requirements Specification, Feasibility, and...

What You'll Learn

  • Translate engineering design specifications into functional electronic circuit schematics with component datasheets.
  • Perform tolerance analysis and thermal dissipation calculations for selected passives and active semiconductors.
  • Design 2-layer printed circuit boards (PCBs) in KiCad adhering to design rules (DRC), trace width, and clearances.
  • Generate standard manufacturing packages (Gerber RS-274X, drill files, bill of materials) compliant with PCB fabrication standards.

Requirements

  • Pass in EEE 107 and EEE 203.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 1 • Lecture 1 Chapter 1: The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-EE-...

Module 1 • Subtopic 1•18,233 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 1 • Lecture 2 Chapter 1: The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Eng...

Module 1 • Subtopic 2•26,502 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 1 Formative Assessment: The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: The Engineering Design Process: Requirements Specification, Feasibility, and Cost Trade-offs.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 2 • Lecture 1 Chapter 2: Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-EE-DES-01...

Module 2 • Subtopic 1•17,956 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 2 • Lecture 2 Chapter 2: Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineeri...

Module 2 • Subtopic 2•24,776 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 2 Formative Assessment: Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Component Selection: Datasheet Interpretation, Tolerance, Power Rating, and Footprints.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC): Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 3 • Lecture 1 Chapter 3: Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC) — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 &bu...

Module 3 • Subtopic 1•18,026 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC): Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 3 • Lecture 2 Chapter 3: Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC) — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1...

Module 3 • Subtopic 2•25,780 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 3 Formative Assessment: Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Schematic Capture Workflows in KiCad: Hierarchical Schematics, Netlists, and Electrical Rules Check (ERC).

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 4 • Lecture 1 Chapter 4: PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-E...

Module 4 • Subtopic 1•17,869 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 4 • Lecture 2 Chapter 4: PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied E...

Module 4 • Subtopic 2•27,368 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 4 Formative Assessment: PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: PCB Fundamentals: Substrates (FR4), Copper Thickness, Trace Width Sizing, and Current Capacity.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 5 • Lecture 1 Chapter 5: PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-E...

Module 5 • Subtopic 1•17,933 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 5 • Lecture 2 Chapter 5: PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied E...

Module 5 • Subtopic 2•25,709 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 5 Formative Assessment: PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: PCB Routing Guidelines: Decoupling Capacitors, Ground Planes, Star Grounding, and Return Paths.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC): Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 6 • Lecture 1 Chapter 6: Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC) — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-EE-DES-01...

Module 6 • Subtopic 1•17,837 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC): Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 6 • Lecture 2 Chapter 6: Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC) — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineeri...

Module 6 • Subtopic 2•27,352 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 6 Formative Assessment: Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Design for Manufacturing (DFM) and Design for Assembly (DFA): Design Rule Checks (DRC).

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 7 • Lecture 1 Chapter 7: Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 • COREN-EE-DES-01 &b...

Module 7 • Subtopic 1•17,919 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 7 • Lecture 2 Chapter 7: Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering...

Module 7 • Subtopic 2•24,745 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 7 Formative Assessment: Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Surface Mount Technology (SMT) vs. Through-Hole Technology (THT) Layout Constraints.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review: Theoretical Foundations, Modeling & System Architecture

EEE 214 • 200L • Engineering Design Chapter 8 • Lecture 1 Chapter 8: Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout) • NUC-CCMAS-ENG-EEE210 •...

Module 8 • Subtopic 1•18,172 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review: Applied Engineering Computation, Production & Verification

EEE 214 • 200L • Engineering Design Chapter 8 • Lecture 2 Chapter 8: Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Ap...

Module 8 • Subtopic 2•27,870 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 214 Ch 8 Formative Assessment: Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Gerber RS-274X File Generation, Excellon Drill Files, Bill of Materials (BOM), and Fabrication Review.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 214: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 214: Engineering Design & Prototyping I (Schematics, Breadboarding & PCB Layout).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.