Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 314: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware)

Longitudinal design milestone: mixed-signal hardware design, ADC/sensor integration, microcontroller firmware in C, 4-layer PCB design, and EMI/EMC compliance.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Longitudinal design milestone: mixed-signal hardware design, ADC/sensor integration, microcontroller firmware in C, 4-layer PCB design, and EMI/EMC compliance. Curriculum Structure & Core Modules: • 1. System Architecture Definition: Mixed-Signal Partitioning, Power Budgets,...

What You'll Learn

  • Design mixed-signal electronic architectures integrating analog sensor front-ends with digital microcontroller cores.
  • Write modular, interrupt-driven embedded firmware in C for peripheral communication (I2C, SPI, UART).
  • Layout multilayer printed circuit boards (4-layer stackup) with separated analog and digital ground planes.
  • Apply electromagnetic compatibility (EMC) and electromagnetic interference (EMI) mitigation techniques in PCB design.

Requirements

  • Pass in EEE 214 and EEE 311.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 1 • Lecture 1 Chapter 1: System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 • COREN-EE...

Module 1 • Subtopic 1•18,256 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 1 • Lecture 2 Chapter 1: System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engine...

Module 1 • Subtopic 2•26,368 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 1 Formative Assessment: System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: System Architecture Definition: Mixed-Signal Partitioning, Power Budgets, and Clock Trees.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M): Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 2 • Lecture 1 Chapter 2: Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M) — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 • COREN-EE-D...

Module 2 • Subtopic 1•17,751 characters of authentic academic content
Subtopic 2Document LectureOpen Access~29 min read

Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M): Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 2 • Lecture 2 Chapter 2: Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M) — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineer...

Module 2 • Subtopic 2•24,621 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 2 Formative Assessment: Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Analog Front-End (AFE) Integration with 32-Bit Microcontroller Platforms (ARM Cortex-M).

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 3 • Lecture 1 Chapter 3: Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 •...

Module 3 • Subtopic 1•18,294 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 3 • Lecture 2 Chapter 3: Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applie...

Module 3 • Subtopic 2•26,390 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 3 Formative Assessment: Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Embedded Firmware Design: Hardware Abstraction Layers (HAL), Ring Buffers, and Interrupt Handling.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 4 • Lecture 1 Chapter 4: Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 • COREN-EE-...

Module 4 • Subtopic 1•17,891 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 4 • Lecture 2 Chapter 4: Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Enginee...

Module 4 • Subtopic 2•27,398 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 4 Formative Assessment: Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Communication Protocols: Hardware Interfacing and Timing Diagrams for I2C, SPI, and UART.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 5 • Lecture 1 Chapter 5: Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 • COR...

Module 5 • Subtopic 1•17,976 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 5 • Lecture 2 Chapter 5: Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied E...

Module 5 • Subtopic 2•24,776 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 5 Formative Assessment: Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Multilayer PCB Design in KiCad: 4-Layer Stackup (Signal-GND-PWR-Signal) and Impedance Matching.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 6 • Lecture 1 Chapter 6: Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 &b...

Module 6 • Subtopic 1•18,461 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 6 • Lecture 2 Chapter 6: Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. A...

Module 6 • Subtopic 2•26,352 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 6 Formative Assessment: Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Electromagnetic Interference (EMI) Mitigation: Return Current Paths, Ground Bounces, and Ferrite Beads.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 7 • Lecture 1 Chapter 7: Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 • COREN-EE-DES-02...

Module 7 • Subtopic 1•17,956 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 7 • Lecture 2 Chapter 7: Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering S...

Module 7 • Subtopic 2•24,780 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 7 Formative Assessment: Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Thermal Management in Enclosures: Heat Sink Sizing, Copper Pours, and Thermal Vias.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation: Theoretical Foundations, Modeling & System Architecture

EEE 314 • 300L • Engineering Design Chapter 8 • Lecture 1 Chapter 8: Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) • NUC-CCMAS-ENG-EEE314 &bul...

Module 8 • Subtopic 1•18,257 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation: Applied Engineering Computation, Production & Verification

EEE 314 • 300L • Engineering Design Chapter 8 • Lecture 2 Chapter 8: Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. App...

Module 8 • Subtopic 2•26,506 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 314 Ch 8 Formative Assessment: Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Design Review Protocol, Design for Testability (DFT), Test Point Placement, and Prototype Validation.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 314: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 314: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

EEE 314: Engineering Design & Prototyping II (Mixed-Signal Hardware & Embedded Firmware) | PAMCET University — B.Eng | PAMCET