Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 520: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense)

Culmination of undergraduate engineering programme: physical/virtual prototype realization, testing, parameter verification, thesis submission, and oral defense.

Instructor
Created by PAMCET Learning Team
advanced2 - 4 weeksEnglish

Course Overview

Culmination of undergraduate engineering programme: physical/virtual prototype realization, testing, parameter verification, thesis submission, and oral defense. Curriculum Structure & Core Modules: • 1. Hardware Construction and Component Procurement Verification • 2....

What You'll Learn

  • Construct a fully functional physical or verified high-fidelity virtual prototype satisfying engineering specifications.
  • Execute rigorous test protocols, data logging, and experimental measurements validating system performance.
  • Perform comprehensive error analysis, diagnostic troubleshooting, and design iteration to resolve operational discrepancies.
  • Author a definitive undergraduate engineering dissertation and successfully defend achievements before an external examination board.

Requirements

  • Pass in EEE 519.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Hardware Construction and Component Procurement Verification: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 1 • Lecture 1 Chapter 1: Hardware Construction and Component Procurement Verification — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 • COREN-EE-CAP-02 • IEEE-EE-CAP-...

Module 1 • Subtopic 1•17,942 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Hardware Construction and Component Procurement Verification: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 1 • Lecture 2 Chapter 1: Hardware Construction and Component Procurement Verification — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Dire...

Module 1 • Subtopic 2•24,808 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 1 Formative Assessment: Hardware Construction and Component Procurement Verification

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Hardware Construction and Component Procurement Verification.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 2 • Lecture 1 Chapter 2: Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 • COREN-EE-CAP-02 &bull...

Module 2 • Subtopic 1•18,149 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 2 • Lecture 2 Chapter 2: Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &am...

Module 2 • Subtopic 2•26,289 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 2 Formative Assessment: Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Subsystem Integration, Signal Level Interfacing, and Power Supply Bring-Up.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Embedded Firmware and Software Control Deployment, Calibration, and Tuning: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 3 • Lecture 1 Chapter 3: Embedded Firmware and Software Control Deployment, Calibration, and Tuning — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 • COREN-EE-CAP-02 &bull...

Module 3 • Subtopic 1•18,171 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Embedded Firmware and Software Control Deployment, Calibration, and Tuning: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 3 • Lecture 2 Chapter 3: Embedded Firmware and Software Control Deployment, Calibration, and Tuning — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &am...

Module 3 • Subtopic 2•26,311 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 3 Formative Assessment: Embedded Firmware and Software Control Deployment, Calibration, and Tuning

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Embedded Firmware and Software Control Deployment, Calibration, and Tuning.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 4 • Lecture 1 Chapter 4: Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 &bu...

Module 4 • Subtopic 1•18,302 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 4 • Lecture 2 Chapter 4: Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Appl...

Module 4 • Subtopic 2•25,216 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 4 Formative Assessment: Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Experimental Test Plan Formulation: Bench Instrumentation, Test Matrices, and Measurement Protocols.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Performance Validation Against Initial Design Specifications and Regulatory Standards: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 5 • Lecture 1 Chapter 5: Performance Validation Against Initial Design Specifications and Regulatory Standards — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 • COREN-EE-C...

Module 5 • Subtopic 1•18,167 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Performance Validation Against Initial Design Specifications and Regulatory Standards: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 5 • Lecture 2 Chapter 5: Performance Validation Against Initial Design Specifications and Regulatory Standards — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineerin...

Module 5 • Subtopic 2•24,983 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 5 Formative Assessment: Performance Validation Against Initial Design Specifications and Regulatory Standards

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Performance Validation Against Initial Design Specifications and Regulatory Standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 6 • Lecture 1 Chapter 6: Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 • COREN-EE-CAP-0...

Module 6 • Subtopic 1•17,929 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 6 • Lecture 2 Chapter 6: Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Sc...

Module 6 • Subtopic 2•24,753 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 6 Formative Assessment: Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Failure Analysis, Troubleshooting Diagnostics, and Design Optimization Iterations.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 7 • Lecture 1 Chapter 7: Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE520 &...

Module 7 • Subtopic 1•18,035 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 7 • Lecture 2 Chapter 7: Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Ap...

Module 7 • Subtopic 2•26,122 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 7 Formative Assessment: Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Authoring the Final Engineering Dissertation: Scientific Style, Results Presentation, and Conclusions.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners: Theoretical Foundations, Modeling & System Architecture

EEE 520 • 500L • Engineering Design Chapter 8 • Lecture 1 Chapter 8: Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) • NUC-CCMAS-ENG-EEE...

Module 8 • Subtopic 1•18,015 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners: Applied Engineering Computation, Production & Verification

EEE 520 • 500L • Engineering Design Chapter 8 • Lecture 2 Chapter 8: Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management...

Module 8 • Subtopic 2•27,484 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 520 Ch 8 Formative Assessment: Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Final Oral Project Defense, Prototype Demonstration, and Assessment by the Departmental Board of Examiners.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 520: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 520: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

EEE 520: Final-Year Engineering Capstone Project II (Prototyping, Testing & Final Defense) | PAMCET University — B.Eng | PAMCET