Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 111: Physics Laboratory I (Mechanics, Optics & Thermodynamics)

Hands-on bench experimentation in classical mechanics, conservation laws, optics, focal lengths, and heat capacities.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Hands-on bench experimentation in classical mechanics, conservation laws, optics, focal lengths, and heat capacities. Curriculum Structure & Core Modules: • 1. Measurement Metrology, Instrument Precision, and Uncertainty Analysis • 2. Experimental Error Propagation and...

What You'll Learn

  • Use precision physical measuring instruments (micrometer screw gauges, vernier calipers, traveling microscopes).
  • Compute experimental error, standard deviation, and propagation of uncertainty in measured data.
  • Determine gravitational acceleration using simple and compound pendulums.
  • Verify focal lengths of lenses, Snell's law of refraction, and specific heat capacities of metals.

Requirements

  • Enrolled concurrently in EEE 103.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Measurement Metrology, Instrument Precision, and Uncertainty Analysis: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 1 • Lecture 1 Chapter 1: Measurement Metrology, Instrument Precision, and Uncertainty Analysis — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagog...

Module 1 • Subtopic 1•18,048 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Measurement Metrology, Instrument Precision, and Uncertainty Analysis: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 1 • Lecture 2 Chapter 1: Measurement Metrology, Instrument Precision, and Uncertainty Analysis — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & D...

Module 1 • Subtopic 2•25,045 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 1 Formative Assessment: Measurement Metrology, Instrument Precision, and Uncertainty Analysis

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Measurement Metrology, Instrument Precision, and Uncertainty Analysis.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Experimental Error Propagation and Scientific Graph Plotting: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 2 • Lecture 1 Chapter 2: Experimental Error Propagation and Scientific Graph Plotting — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagogical Scop...

Module 2 • Subtopic 1•17,920 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Experimental Error Propagation and Scientific Graph Plotting: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 2 • Lecture 2 Chapter 2: Experimental Error Propagation and Scientific Graph Plotting — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Dir...

Module 2 • Subtopic 2•24,809 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 2 Formative Assessment: Experimental Error Propagation and Scientific Graph Plotting

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Experimental Error Propagation and Scientific Graph Plotting.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Determination of Acceleration Due to Gravity via Simple Pendulum: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 3 • Lecture 1 Chapter 3: Determination of Acceleration Due to Gravity via Simple Pendulum — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagogical...

Module 3 • Subtopic 1•18,523 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Determination of Acceleration Due to Gravity via Simple Pendulum: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 3 • Lecture 2 Chapter 3: Determination of Acceleration Due to Gravity via Simple Pendulum — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design...

Module 3 • Subtopic 2•27,719 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 3 Formative Assessment: Determination of Acceleration Due to Gravity via Simple Pendulum

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Determination of Acceleration Due to Gravity via Simple Pendulum.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Kater's Reversible Pendulum and Rotational Inertia Determination: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 4 • Lecture 1 Chapter 4: Kater's Reversible Pendulum and Rotational Inertia Determination — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagog...

Module 4 • Subtopic 1•18,274 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Kater's Reversible Pendulum and Rotational Inertia Determination: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 4 • Lecture 2 Chapter 4: Kater's Reversible Pendulum and Rotational Inertia Determination — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & D...

Module 4 • Subtopic 2•27,460 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 4 Formative Assessment: Kater's Reversible Pendulum and Rotational Inertia Determination

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Kater's Reversible Pendulum and Rotational Inertia Determination.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Verification of Hooke's Law and Young's Modulus of Elasticity: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 5 • Lecture 1 Chapter 5: Verification of Hooke's Law and Young's Modulus of Elasticity — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedag...

Module 5 • Subtopic 1•17,963 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Verification of Hooke's Law and Young's Modulus of Elasticity: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 5 • Lecture 2 Chapter 5: Verification of Hooke's Law and Young's Modulus of Elasticity — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 5 • Subtopic 2•26,133 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 5 Formative Assessment: Verification of Hooke's Law and Young's Modulus of Elasticity

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Verification of Hooke's Law and Young's Modulus of Elasticity.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Measurement of Specific Heat Capacity via Method of Mixtures: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 6 • Lecture 1 Chapter 6: Measurement of Specific Heat Capacity via Method of Mixtures — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagogical Scop...

Module 6 • Subtopic 1•18,423 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Measurement of Specific Heat Capacity via Method of Mixtures: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 6 • Lecture 2 Chapter 6: Measurement of Specific Heat Capacity via Method of Mixtures — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Dir...

Module 6 • Subtopic 2•25,438 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 6 Formative Assessment: Measurement of Specific Heat Capacity via Method of Mixtures

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Measurement of Specific Heat Capacity via Method of Mixtures.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Refraction of Light, Snell's Law, and Prism Minimum Deviation: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 7 • Lecture 1 Chapter 7: Refraction of Light, Snell's Law, and Prism Minimum Deviation — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagogica...

Module 7 • Subtopic 1•17,746 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Refraction of Light, Snell's Law, and Prism Minimum Deviation: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 7 • Lecture 2 Chapter 7: Refraction of Light, Snell's Law, and Prism Minimum Deviation — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Desi...

Module 7 • Subtopic 2•25,926 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 7 Formative Assessment: Refraction of Light, Snell's Law, and Prism Minimum Deviation

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Refraction of Light, Snell's Law, and Prism Minimum Deviation.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Convex and Concave Thin Lens Optics and Focal Length Calibration: Theoretical Foundations, Modeling & System Architecture

EEE 111 • 100L • Engineering Science Chapter 8 • Lecture 1 Chapter 8: Convex and Concave Thin Lens Optics and Focal Length Calibration — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory I (Mechanics, Optics & Thermodynamics) • NUC-CCMAS-ENG-PHY107 • COREN-FND-LAB-01 • IEEE-EE-LAB-01 1. Pedagogical...

Module 8 • Subtopic 1•18,057 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Convex and Concave Thin Lens Optics and Focal Length Calibration: Applied Engineering Computation, Production & Verification

EEE 111 • 100L • Engineering Science Chapter 8 • Lecture 2 Chapter 8: Convex and Concave Thin Lens Optics and Focal Length Calibration — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design...

Module 8 • Subtopic 2•27,253 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 111 Ch 8 Formative Assessment: Convex and Concave Thin Lens Optics and Focal Length Calibration

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Convex and Concave Thin Lens Optics and Focal Length Calibration.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 111: Physics Laboratory I (Mechanics, Optics & Thermodynamics)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 111: Physics Laboratory I (Mechanics, Optics & Thermodynamics).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.