Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 112: Physics Laboratory II (Electricity & Magnetism Experiments)

Bench verification of Ohm's law, potentiometer balancing, Wheatstone bridge, RC circuit time constants, and magnetic induction.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Bench verification of Ohm's law, potentiometer balancing, Wheatstone bridge, RC circuit time constants, and magnetic induction. Curriculum Structure & Core Modules: • 1. Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration • 2. Verification of Ohm's Law and...

What You'll Learn

  • Operate DC regulated power supplies, multimeters, rheostats, and galvanometers on experimental electrical benches.
  • Determine unknown resistances with high precision using the meter Wheatstone bridge method.
  • Calibrate potentiometers for EMF comparison of primary and secondary electrochemical cells.
  • Measure charging and discharging transient voltages across capacitors to verify theoretical time constants (RC).

Requirements

  • Enrolled concurrently in EEE 104.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 1 • Lecture 1 Chapter 1: Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03 1. Peda...

Module 1 • Subtopic 1•18,057 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 1 • Lecture 2 Chapter 1: Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 1 • Subtopic 2•25,050 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 1 Formative Assessment: Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Electrical Bench Instrumentation Safety, Fusing, and Meter Calibration.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Verification of Ohm's Law and Internal Resistance of Power Sources: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 2 • Lecture 1 Chapter 2: Verification of Ohm's Law and Internal Resistance of Power Sources — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03 1. Ped...

Module 2 • Subtopic 1•17,965 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Verification of Ohm's Law and Internal Resistance of Power Sources: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 2 • Lecture 2 Chapter 2: Verification of Ohm's Law and Internal Resistance of Power Sources — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 2 • Subtopic 2•26,133 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 2 Formative Assessment: Verification of Ohm's Law and Internal Resistance of Power Sources

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Verification of Ohm's Law and Internal Resistance of Power Sources.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Measurement of Unknown Resistance via Wheatstone Bridge: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 3 • Lecture 1 Chapter 3: Measurement of Unknown Resistance via Wheatstone Bridge — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03 1. Pedagogical Scope &...

Module 3 • Subtopic 1•18,360 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Measurement of Unknown Resistance via Wheatstone Bridge: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 3 • Lecture 2 Chapter 3: Measurement of Unknown Resistance via Wheatstone Bridge — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directiv...

Module 3 • Subtopic 2•25,383 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 3 Formative Assessment: Measurement of Unknown Resistance via Wheatstone Bridge

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Measurement of Unknown Resistance via Wheatstone Bridge.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Potentiometer Calibration and EMF Comparison of Chemical Cells: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 4 • Lecture 1 Chapter 4: Potentiometer Calibration and EMF Comparison of Chemical Cells — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03 1. Pedagogical...

Module 4 • Subtopic 1•17,940 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Potentiometer Calibration and EMF Comparison of Chemical Cells: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 4 • Lecture 2 Chapter 4: Potentiometer Calibration and EMF Comparison of Chemical Cells — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design D...

Module 4 • Subtopic 2•24,823 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 4 Formative Assessment: Potentiometer Calibration and EMF Comparison of Chemical Cells

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Potentiometer Calibration and EMF Comparison of Chemical Cells.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 5 • Lecture 1 Chapter 5: Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-E...

Module 5 • Subtopic 1•18,156 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 5 • Lecture 2 Chapter 5: Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineer...

Module 5 • Subtopic 2•24,991 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 5 Formative Assessment: Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Temperature Dependence of Metal Wire Resistance and Resistance Temperature Coefficient.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 6 • Lecture 1 Chapter 6: Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-...

Module 6 • Subtopic 1•17,973 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 6 • Lecture 2 Chapter 6: Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Enginee...

Module 6 • Subtopic 2•24,806 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 6 Formative Assessment: Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Transient Analysis of RC Circuits: Charging, Discharging, and Time Constant Measurement.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 7 • Lecture 1 Chapter 7: Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03 1. Ped...

Module 7 • Subtopic 1•17,843 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 7 • Lecture 2 Chapter 7: Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 7 • Subtopic 2•24,708 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 7 Formative Assessment: Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Magnetic Field Mapping Around Current-Carrying Conductors and Solenoids.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Electromagnetic Induction and Quantitative Verification of Faraday's Law: Theoretical Foundations, Modeling & System Architecture

EEE 112 • 100L • Engineering Science Chapter 8 • Lecture 1 Chapter 8: Electromagnetic Induction and Quantitative Verification of Faraday's Law — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Physics Laboratory II (Electricity & Magnetism Experiments) • NUC-CCMAS-ENG-PHY108 • COREN-FND-LAB-03 • IEEE-EE-LAB-03...

Module 8 • Subtopic 1•18,502 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Electromagnetic Induction and Quantitative Verification of Faraday's Law: Applied Engineering Computation, Production & Verification

EEE 112 • 100L • Engineering Science Chapter 8 • Lecture 2 Chapter 8: Electromagnetic Induction and Quantitative Verification of Faraday's Law — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope...

Module 8 • Subtopic 2•26,462 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 112 Ch 8 Formative Assessment: Electromagnetic Induction and Quantitative Verification of Faraday's Law

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Electromagnetic Induction and Quantitative Verification of Faraday's Law.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 112: Physics Laboratory II (Electricity & Magnetism Experiments)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 112: Physics Laboratory II (Electricity & Magnetism Experiments).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.