Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 312: Sensors, Transducers & Data Acquisition Systems

Sensors and transducers (temperature, pressure, strain, optical, proximity), signal conditioning (instrumentation op-amps, bridge circuits), ADCs, and DACs.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Sensors and transducers (temperature, pressure, strain, optical, proximity), signal conditioning (instrumentation op-amps, bridge circuits), ADCs, and DACs. Curriculum Structure & Core Modules: • 1. Classification of Transducers: Active vs. Passive, Analog vs. Digital, and...

What You'll Learn

  • Select suitable sensors and transducers based on sensitivity, linearity, response time, and environmental constraints.
  • Design precision signal conditioning circuits incorporating instrumentation amplifiers and active analog low-pass filters.
  • Interface resistive (RTD, thermistor, strain gauge) and capacitive transducers to balanced Wheatstone bridge topologies.
  • Analyze sample-and-hold circuits, Successive Approximation Register (SAR) and Flash ADCs, and digital-to-analog converters.

Requirements

  • Pass in EEE 206 and EEE 210.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~22 min read

Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 1 • Lecture 1 Chapter 1: Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • I...

Module 1 • Subtopic 1•17,990 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 1 • Lecture 2 Chapter 1: Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1...

Module 1 • Subtopic 2•27,497 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 1 Formative Assessment: Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Classification of Transducers: Active vs. Passive, Analog vs. Digital, and Sensor Static/Dynamic Metrics.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 2 • Lecture 1 Chapter 2: Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 &b...

Module 2 • Subtopic 1•18,246 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 2 • Lecture 2 Chapter 2: Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Manage...

Module 2 • Subtopic 2•25,172 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 2 Formative Assessment: Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Temperature Sensors: Thermocouples (Seebeck Effect, Cold-Junction Compensation), RTDs (Pt100), and Thermistors.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 3 • Lecture 1 Chapter 3: Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • I...

Module 3 • Subtopic 1•18,236 characters of authentic academic content
Subtopic 2Document LectureOpen Access~33 min read

Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 3 • Lecture 2 Chapter 3: Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1...

Module 3 • Subtopic 2•27,363 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 3 Formative Assessment: Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Displacement, Strain, and Force Sensors: LVDTs, Piezoelectric Crystals, and Piezoresistive Strain Gauges.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 4 • Lecture 1 Chapter 4: Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • IEEE-EE-I...

Module 4 • Subtopic 1•18,369 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 4 • Lecture 2 Chapter 4: Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applie...

Module 4 • Subtopic 2•25,414 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 4 Formative Assessment: Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Optical and Proximity Sensors: Photodiodes, Phototransistors, Optoisolators, Hall-Effect Sensors.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting): Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 5 • Lecture 1 Chapter 5: Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting) — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • IEEE-EE-INS...

Module 5 • Subtopic 1•18,405 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting): Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 5 • Lecture 2 Chapter 5: Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting) — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied...

Module 5 • Subtopic 2•25,454 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 5 Formative Assessment: Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting)

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Signal Conditioning: Three Op-Amp Instrumentation Amplifiers (CMRR Optimization, Gain Setting).

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 6 • Lecture 1 Chapter 6: Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • IEEE-EE-INS-02 1. Pe...

Module 6 • Subtopic 1•18,364 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 6 • Lecture 2 Chapter 6: Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineeri...

Module 6 • Subtopic 2•25,431 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 6 Formative Assessment: Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Bridge Amplifiers, Cold-Junction Compensators, and Ground Loop Elimination Strategies.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 7 • Lecture 1 Chapter 7: Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • I...

Module 7 • Subtopic 1•17,977 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 7 • Lecture 2 Chapter 7: Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1...

Module 7 • Subtopic 2•24,789 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 7 Formative Assessment: Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Analog-to-Digital Conversion: Sample-and-Hold Circuits, Flash ADCs, SAR ADCs, and Sigma-Delta Converters.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows: Theoretical Foundations, Modeling & System Architecture

EEE 312 • 300L • Systems Engineering Chapter 8 • Lecture 1 Chapter 8: Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Sensors, Transducers & Data Acquisition Systems • NUC-CCMAS-ENG-EEE312 • COREN-EE-INS-02 • IEE...

Module 8 • Subtopic 1•18,033 characters of authentic academic content
Subtopic 2Document LectureOpen Access~32 min read

Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows: Applied Engineering Computation, Production & Verification

EEE 312 • 300L • Systems Engineering Chapter 8 • Lecture 2 Chapter 8: Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1....

Module 8 • Subtopic 2•26,755 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 312 Ch 8 Formative Assessment: Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Digital-to-Analog Converters (R-2R Ladder), Microcontroller DAQ Interfacing, and Calibration Workflows.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 312: Sensors, Transducers & Data Acquisition Systems
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 312: Sensors, Transducers & Data Acquisition Systems.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

EEE 312: Sensors, Transducers & Data Acquisition Systems | PAMCET University — B.Eng | PAMCET