Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyElectrical & Electronic Engineering

EEE 107: Technical Drawing & Computer-Aided Drafting (CAD)

Engineering graphical communication, orthographic projection, isometric views, electrical schematic symbology, and 2D CAD drafting.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Engineering graphical communication, orthographic projection, isometric views, electrical schematic symbology, and 2D CAD drafting. Curriculum Structure & Core Modules: • 1. Principles of Engineering Drawing and ISO Drafting Standards • 2. Geometric Constructions, Tangencies,...

What You'll Learn

  • Construct first and third angle orthographic projections according to ISO engineering drawing standards.
  • Draft isometric, oblique, and sectional views of mechanical enclosures and chassis.
  • Apply standardized IEEE/IEC electrical drafting symbols for circuit schematics and single-line diagrams.
  • Produce precision 2D CAD engineering drawings with layers, dimensions, and title blocks using FreeCAD/AutoCAD.

Requirements

  • Credits in SSCE Mathematics and Technical Drawing or Physics.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Electrical & Electronic Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~21 min read

Principles of Engineering Drawing and ISO Drafting Standards: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 1 • Lecture 1 Chapter 1: Principles of Engineering Drawing and ISO Drafting Standards — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope & B...

Module 1 • Subtopic 1•17,836 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Principles of Engineering Drawing and ISO Drafting Standards: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 1 • Lecture 2 Chapter 1: Principles of Engineering Drawing and ISO Drafting Standards — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Dire...

Module 1 • Subtopic 2•25,705 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 1 Formative Assessment: Principles of Engineering Drawing and ISO Drafting Standards

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 1: Principles of Engineering Drawing and ISO Drafting Standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Geometric Constructions, Tangencies, and Conic Curves: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 2 • Lecture 1 Chapter 2: Geometric Constructions, Tangencies, and Conic Curves — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope & Bloom's...

Module 2 • Subtopic 1•17,595 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Geometric Constructions, Tangencies, and Conic Curves: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 2 • Lecture 2 Chapter 2: Geometric Constructions, Tangencies, and Conic Curves — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directives...

Module 2 • Subtopic 2•25,865 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 2 Formative Assessment: Geometric Constructions, Tangencies, and Conic Curves

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 2: Geometric Constructions, Tangencies, and Conic Curves.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Orthographic Projections: First and Third Angle Systems: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 3 • Lecture 1 Chapter 3: Orthographic Projections: First and Third Angle Systems — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope & Bloom'...

Module 3 • Subtopic 1•17,993 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Orthographic Projections: First and Third Angle Systems: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 3 • Lecture 2 Chapter 3: Orthographic Projections: First and Third Angle Systems — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directive...

Module 3 • Subtopic 2•26,202 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 3 Formative Assessment: Orthographic Projections: First and Third Angle Systems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 3: Orthographic Projections: First and Third Angle Systems.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Sectional Views, Cutting Planes, and Hatching Conventions: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 4 • Lecture 1 Chapter 4: Sectional Views, Cutting Planes, and Hatching Conventions — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope & Bloo...

Module 4 • Subtopic 1•17,730 characters of authentic academic content
Subtopic 2Document LectureOpen Access~29 min read

Sectional Views, Cutting Planes, and Hatching Conventions: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 4 • Lecture 2 Chapter 4: Sectional Views, Cutting Planes, and Hatching Conventions — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directi...

Module 4 • Subtopic 2•24,633 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 4 Formative Assessment: Sectional Views, Cutting Planes, and Hatching Conventions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 4: Sectional Views, Cutting Planes, and Hatching Conventions.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Isometric, Oblique, and Axonometric Pictorial Projections: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 5 • Lecture 1 Chapter 5: Isometric, Oblique, and Axonometric Pictorial Projections — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope & Bloo...

Module 5 • Subtopic 1•17,730 characters of authentic academic content
Subtopic 2Document LectureOpen Access~29 min read

Isometric, Oblique, and Axonometric Pictorial Projections: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 5 • Lecture 2 Chapter 5: Isometric, Oblique, and Axonometric Pictorial Projections — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Directi...

Module 5 • Subtopic 2•24,633 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 5 Formative Assessment: Isometric, Oblique, and Axonometric Pictorial Projections

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 5: Isometric, Oblique, and Axonometric Pictorial Projections.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Standard IEEE/IEC Electrical and Electronics Drafting Symbols: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 6 • Lecture 1 Chapter 6: Standard IEEE/IEC Electrical and Electronics Drafting Symbols — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope &...

Module 6 • Subtopic 1•17,920 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Standard IEEE/IEC Electrical and Electronics Drafting Symbols: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 6 • Lecture 2 Chapter 6: Standard IEEE/IEC Electrical and Electronics Drafting Symbols — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design Dir...

Module 6 • Subtopic 2•24,815 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 6 Formative Assessment: Standard IEEE/IEC Electrical and Electronics Drafting Symbols

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 6: Standard IEEE/IEC Electrical and Electronics Drafting Symbols.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~21 min read

Introduction to 2D CAD Software, Coordinate Systems, and Layers: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 7 • Lecture 1 Chapter 7: Introduction to 2D CAD Software, Coordinate Systems, and Layers — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical Scope &amp...

Module 7 • Subtopic 1•17,697 characters of authentic academic content
Subtopic 2Document LectureOpen Access~31 min read

Introduction to 2D CAD Software, Coordinate Systems, and Layers: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 7 • Lecture 2 Chapter 7: Introduction to 2D CAD Software, Coordinate Systems, and Layers — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope & Design D...

Module 7 • Subtopic 2•25,560 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 7 Formative Assessment: Introduction to 2D CAD Software, Coordinate Systems, and Layers

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 7: Introduction to 2D CAD Software, Coordinate Systems, and Layers.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~22 min read

Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing: Theoretical Foundations, Modeling & System Architecture

EEE 107 • 100L • Engineering Design Chapter 8 • Lecture 1 Chapter 8: Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing — Theoretical Foundations, Mathematical Modeling & System Architecture Curriculum Alignment: Technical Drawing & Computer-Aided Drafting (CAD) • NUC-CCMAS-ENG-MEE101 • COREN-FND-DES-01 • IEEE-EE-DES-01 1. Pedagogical S...

Module 8 • Subtopic 1•17,857 characters of authentic academic content
Subtopic 2Document LectureOpen Access~30 min read

Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing: Applied Engineering Computation, Production & Verification

EEE 107 • 100L • Engineering Design Chapter 8 • Lecture 2 Chapter 8: Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing — Applied Engineering Computation, Production Systems & Verification Applied Computations • Numerical Simulation Protocols • Physical Testing Benchmarks • FMEA Quality Risk Management 1. Applied Engineering Scope &...

Module 8 • Subtopic 2•24,730 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

EEE 107 Ch 8 Formative Assessment: Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative engineering assessment evaluating analytical and design outcomes for Chapter 8: Dimensioning, Tolerancing, Schematics Layout, and Title Block Publishing.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
EEE 107: Technical Drawing & Computer-Aided Drafting (CAD)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Electrical & Electronic Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for EEE 107: Technical Drawing & Computer-Aided Drafting (CAD).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.