Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyEngineering

Engineering Drawing & Design

Complete Engineering Drawing & Design course with lessons, quizzes and practical questions

Instructor
Created by PAMCET Learning Team
1 Student Enrolledintermediate1 weekEnglish

Course Overview

Complete Engineering Drawing & Design course with lessons, quizzes and practical questions Curriculum Structure & Core Modules: • 1. The Engineering Design Process, Problem Formulation & Conceptual Modeling • 2. Technical Drawing Standards, Orthographic Projections &...

What You'll Learn

  • Understand and apply the core concepts and terminology of Engineering Drawing & Design
  • Build practical competence in University - Engineering through structured coursework
  • Complete the full module sequence and assessments for Engineering Drawing & Design
  • Apply University - Engineering knowledge to coursework, assignments and exam-style questions

Requirements

  • A foundational understanding of University - Engineering concepts, from an introductory course or equivalent experience
  • A computer, tablet or smartphone with a stable internet connection
  • Willingness to commit regular study time to complete lessons, quizzes and assignments

Degree Programme Curriculum Context

This course is a curriculum unit of the B.Eng Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
24 Lecture
•
0s
Subtopic 1Document LectureOpen Access~19 min read

The Engineering Design Lifecycle: Problem Definition, Functional Requirements & Design Specifications

Course Code: ENG 103/104 | Module 1: The Engineering Design Process & Conceptual Modeling The Engineering Design Lifecycle: Problem Definition, Functional Requirements & Design Specifications Systematic methodologies for engineering design: stakeholder needs elicitation, objective trees, functional decomposition, Quality Function Deployment (QFD), and formal Product Design Specifications (...

Module 1 • Subtopic 1•16,001 characters of authentic academic content
Subtopic 2Document Lecture

Conceptual Design, Morphological Analysis, Decision Matrices & Trade-Off Optimization

Course Code: ENG 103/104 | Module 1: The Engineering Design Process & Conceptual Modeling Conceptual Design, Morphological Analysis, Decision Matrices & Trade-Off Optimization Systematic concept generation, functional decomposition, morphological analysis (Zwicky box), Pugh controlled convergence, and multi-criteria decision matrices in engineering synthesis. 1. Conceptual Design & Fun...

Module 1 • Subtopic 2
Subtopic 3Document LectureOpen Access~15 min read

Mathematical Modeling, Lumped-Parameter Systems & Dimensional Homogeneity in Engineering Design

Course Code: ENG 103/104 | Module 1: The Engineering Design Process & Conceptual Modeling Mathematical Modeling, Lumped-Parameter Systems & Dimensional Homogeneity in Engineering Design Mathematical abstraction in engineering synthesis: lumped-parameter versus distributed formulations, dimensional homogeneity, the Buckingham Pi Theorem, and mechanical-electrical analogies. 1. Mathematical...

Module 1 • Subtopic 3•12,302 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: Engineering Design Lifecycle, Modeling & Specifications

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 1: Core Topics

Module 1 • Formative Assessment
Subtopic 1Document Lecture

Engineering Drawing Standards (ISO/BS/NIS), Line Types, Scales & Title Block Layout

Course Code: ENG 103/104 | Module 2: Technical Drawing Standards & Orthographic Projections Engineering Drawing Standards (ISO/BS/NIS), Line Types, Scales & Title Block Layout International and Nigerian standards for technical drawings: ISO 128, BS 8888, NIS 46, drawing sheet formats, title block architecture (ISO 7200), line conventions, and engineering scale ratios. 1. Engineering Drawin...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

First-Angle and Third-Angle Orthographic Projections: Multi-View Analysis & Hidden Geometry

Course Code: ENG 103/104 | Module 2: Technical Drawing Standards & Orthographic Projections First-Angle and Third-Angle Orthographic Projections: Multi-View Analysis & Hidden Geometry Geometric theory of multi-view parallel projection: quadrant analysis, First-Angle versus Third-Angle projection systems, hidden feature mapping, and 45-degree miter line transfer. 1. Principles of Orthograph...

Module 2 • Subtopic 2
Subtopic 3Document LectureOpen Access~16 min read

Geometric Dimensioning, Tolerancing Basics, Limits, Fits & Surface Texture Annotations

Course Code: ENG 103/104 | Module 2: Technical Drawing Standards & Orthographic Projections Geometric Dimensioning, Tolerancing Basics, Limits, Fits & Surface Texture Annotations Principles of engineering metrology: ISO 129 dimensioning rules, limits and fits (ISO 286), clearance and interference fits, geometric tolerance feature control frames, and surface finish roughness parameters. 1....

Module 2 • Subtopic 3•12,949 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: Technical Drawing Standards, Projections & Dimensioning

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 2: Core Topics

Module 2 • Formative Assessment
Subtopic 1Document Lecture

Spatial Force Systems, Resultants, Free-Body Diagrams & Static Equilibrium of Rigid Bodies

Course Code: ENG 103/104 | Module 3: Structural Mechanics in Design Spatial Force Systems, Resultants, Free-Body Diagrams & Static Equilibrium of Rigid Bodies Vector statics in mechanical and civil structures: Varignon's theorem, support reaction models, free-body diagram isolation, and two-dimensional and spatial rigid body equilibrium equations. 1. Force Systems, Moments & Varignon's The...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Truss Analysis: Method of Joints, Method of Sections & Zero-Force Structural Members

Course Code: ENG 103/104 | Module 3: Structural Mechanics in Design Truss Analysis: Method of Joints, Method of Sections & Zero-Force Structural Members Analysis of pin-jointed engineering trusses: static determinacy criteria, zero-force member inspection, Method of Joints, and Method of Sections in structural design. 1. Engineering Trusses & Idealization Assumptions An engineering truss i...

Module 3 • Subtopic 2
Subtopic 3Document LectureOpen Access~14 min read

Internal Shear Force, Bending Moment Diagrams & Centroids of Structural Sections

Course Code: ENG 103/104 | Module 3: Structural Mechanics in Design Internal Shear Force, Bending Moment Diagrams & Centroids of Structural Sections Internal load distributions in beams: shear force and bending moment differential relationships, SFD and BMD construction, section centroids, and second moments of area. 1. Internal Resultants in Structural Members When external loads act on an en...

Module 3 • Subtopic 3•11,494 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: Static Equilibrium, Truss Analysis & Shear-Moment Distributions

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 3: Core Topics

Module 3 • Formative Assessment
Subtopic 1Document Lecture

Stress, Strain, Hooke's Law, Elastic Moduli & Tensile Test Constitutive Behavior

Course Code: ENG 103/104 | Module 4: Materials Science in Design Stress, Strain, Hooke's Law, Elastic Moduli & Tensile Test Constitutive Behavior Constitutive mechanical behavior of engineering solids: true versus engineering stress-strain metrics, Hooke's law, elastic constants relationships, standard tensile test regimes, and plastic yielding transitions. 1. Engineering Stress & Engineer...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

Engineering Material Classes: Metals, Polymers, Ceramics, Composites & Property Charts (Ashby Maps)

Course Code: ENG 103/104 | Module 4: Materials Science in Design Engineering Material Classes: Metals, Polymers, Ceramics, Composites & Property Charts (Ashby Maps) Systematic material selection in engineering design: taxonomy of solid materials, Ashby property charts, performance indices, and multi-objective optimization under mechanical constraints. 1. Taxonomy of Engineering Materials Moder...

Module 4 • Subtopic 2
Subtopic 3Document LectureOpen Access~17 min read

Mechanical Failure Criteria: Yielding, Ultimate Strength, Fatigue, Factor of Safety & Allowable Stress Design

Course Code: ENG 103/104 | Module 4: Materials Science in Design Mechanical Failure Criteria: Yielding, Ultimate Strength, Fatigue, Factor of Safety & Allowable Stress Design Predictive failure theories under multiaxial stress: Maximum Shear Stress (Tresca), Distortion Energy (von Mises), Mohr-Coulomb brittle failure, fatigue endurance limits, and Allowable Stress Design (ASD). 1. Multiaxial S...

Module 4 • Subtopic 3•13,678 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Mid-Course Assessment: Materials Mechanics, Selection & Structural Failure

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 4: Core Topics

Module 4 • Formative Assessment
Subtopic 1Document Lecture

Fluid Properties, Hydrostatic Pressure, Continuity Equation & Incompressible Bernoulli Flow

Course Code: ENG 103/104 | Module 5: Thermal-Fluid Fundamentals in Design Fluid Properties, Hydrostatic Pressure, Continuity Equation & Incompressible Bernoulli Flow Fluid mechanics foundations for engineering design: fluid properties, hydrostatic pressure distributions, center of pressure on submerged surfaces, mass conservation, and Bernoulli energy conservation. 1. Fluid Continuum & Fun...

Module 5 • Subtopic 1
Subtopic 2Document Lecture

Thermodynamics Fundamentals: State Variables, The First Law & Control Volume Energy Conservation

Course Code: ENG 103/104 | Module 5: Thermal-Fluid Fundamentals in Design Thermodynamics Fundamentals: State Variables, The First Law & Control Volume Energy Conservation Thermodynamic state postulates, ideal gas equations of state, work and heat energy modes, the First Law for closed systems, and the Steady-Flow Energy Equation (SFEE) in thermal engineering design. 1. Thermodynamic Systems, S...

Module 5 • Subtopic 2
Subtopic 3Document LectureOpen Access~16 min read

Heat Transfer Modes: Conduction (Fourier's Law), Convection (Newton's Law) & Thermal Resistance Networks

Course Code: ENG 103/104 | Module 5: Thermal-Fluid Fundamentals in Design Heat Transfer Modes: Conduction (Fourier's Law), Convection (Newton's Law) & Thermal Resistance Networks Thermal engineering design: Fourier's law of conductive diffusion, Newton's law of convective transport, Stefan-Boltzmann radiation, and electrical analogy thermal resistance network synthesis. 1. The Three Fundamenta...

Module 5 • Subtopic 3•13,200 characters of authentic academic content
Subtopic 4Open Access~3 min read

Mid-Semester Case Study & Research Paper

Sign in or enroll to access the full lecture notes and interactive reader.

Module 5 • Subtopic 4•116 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: Fluid Statics, Flow Conservation & Heat Transfer Mechanisms

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 5: Core Topics

Module 5 • Formative Assessment
Subtopic 1Document Lecture

Circuit Fundamentals: Ohm's Law, Kirchhoff's Laws (KVL/KCL) & Resistive Divider Networks

Course Code: ENG 103/104 | Module 6: Electromechanical Systems & Actuators Circuit Fundamentals: Ohm's Law, Kirchhoff's Laws (KVL/KCL) & Resistive Divider Networks Direct current (DC) electrical circuit analysis for mechanical and multidisciplinary engineers: charge transport, Ohm's law, Kirchhoff's Current and Voltage Laws, node-voltage analysis, and voltage/current divider design. 1. Ele...

Module 6 • Subtopic 1
Subtopic 2Document Lecture

DC Network Theorems: Thévenin's Equivalent, Norton's Equivalent & Maximum Power Transfer

Course Code: ENG 103/104 | Module 6: Electromechanical Systems & Actuators DC Network Theorems: Thévenin's Equivalent, Norton's Equivalent & Maximum Power Transfer Analytical circuit simplification theorems: Thévenin's and Norton's equivalent models, source transformation, impedance matching, and the Maximum Power Transfer Theorem in engineering system design. 1. The Need for Network Simpl...

Module 6 • Subtopic 2
Subtopic 3Document LectureOpen Access~16 min read

Electromechanical Actuation: DC Motors, Solenoids, Sensors & Electrical Drive Interfacing

Course Code: ENG 103/104 | Module 6: Electromechanical Systems & Actuators Electromechanical Actuation: DC Motors, Solenoids, Sensors & Electrical Drive Interfacing Principles of electromechanical energy conversion: Lorentz force, permanent magnet DC motor dynamics, back-EMF, electromagnetic solenoids, H-bridge pulse-width modulation (PWM), and inductive flyback protection. 1. Electromecha...

Module 6 • Subtopic 3•12,952 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: Circuit Analysis, Network Theorems & Electromechanical Actuators

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 6: Core Topics

Module 6 • Formative Assessment
Subtopic 1Document Lecture

Principles of Computer-Aided Drafting (CAD): Coordinate Systems, Geometric Primitives & 2D Constraints

Course Code: ENG 103/104 | Module 7: Computer-Aided Design & Digital Prototyping Principles of Computer-Aided Drafting (CAD): Coordinate Systems, Geometric Primitives & 2D Constraints Computational foundations of modern engineering design: vector mathematical geometry, spatial coordinate systems, analytical curves (NURBS), and parametric 2D constraint topologies. 1. The Digital Evolution:...

Module 7 • Subtopic 1
Subtopic 2Document Lecture

3D Parametric Solid Modeling: Extrusions, Revolves, Sweeps, Feature Trees & Boolean Operations

Course Code: ENG 103/104 | Module 7: Computer-Aided Design & Digital Prototyping 3D Parametric Solid Modeling: Extrusions, Revolves, Sweeps, Feature Trees & Boolean Operations Geometric solid modeling paradigms: Boundary Representation (B-Rep), Constructive Solid Geometry (CSG), parametric feature trees, generative solid operations, and parent-child associative hierarchies. 1. Solid Modeli...

Module 7 • Subtopic 2
Subtopic 3Document LectureOpen Access~16 min read

Assembly Modeling, Kinematic Degrees of Freedom, Interference Checks & Digital Prototyping

Course Code: ENG 103/104 | Module 7: Computer-Aided Design & Digital Prototyping Assembly Modeling, Kinematic Degrees of Freedom, Interference Checks & Digital Prototyping Digital mock-up and assembly design: bottom-up versus top-down paradigms, 3D kinematic mating constraints, degree of freedom management, static and dynamic collision detection, and digital prototyping. 1. Assembly Paradi...

Module 7 • Subtopic 3•12,906 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Assessment: CAD Coordinate Systems, 3D Feature Modeling & Digital Assemblies

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 7: Core Topics

Module 7 • Formative Assessment
Subtopic 1Document Lecture

Professional Engineering Practice, COREN/NSE Codes of Conduct & Public Safety Responsibilities

Course Code: ENG 103/104 | Module 8: Professional Engineering Practice & Management Professional Engineering Practice, COREN/NSE Codes of Conduct & Public Safety Responsibilities Ethical and statutory foundations of engineering in Nigeria: the Engineers Registration Act, COREN mandates, Nigerian Society of Engineers (NSE) ethical canons, whistleblower obligations, and sustainable practice....

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Engineering Failure Case Studies, Risk Assessment, Hazard Identification & FMEA Methodology

Course Code: ENG 103/104 | Module 8: Professional Engineering Practice & Management Engineering Failure Case Studies, Risk Assessment, Hazard Identification & FMEA Methodology System safety engineering: forensic root cause analysis of historical catastrophes, quantitative risk assessment matrices, Hazard and Operability studies (HAZOP), and Failure Mode and Effects Analysis (FMEA). 1. Fore...

Module 8 • Subtopic 2
Subtopic 3Document LectureOpen Access~19 min read

Project Management Foundations: Work Breakdown Structures (WBS), Gantt Charts & Critical Path Method (CPM)

Course Code: ENG 103/104 | Module 8: Professional Engineering Practice & Management Project Management Foundations: Work Breakdown Structures (WBS), Gantt Charts & Critical Path Method (CPM) Engineering project execution: project lifecycle phases, hierarchical Work Breakdown Structures (WBS), linear schedule Gantt charts, network precedence diagrams, and Critical Path Method (CPM) float ca...

Module 8 • Subtopic 3•15,764 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Comprehensive Final Assessment: Engineering Drawing, Design & Professional Practice

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Week 8: Core Topics

Module 8 • Formative Assessment
Subtopic 5Open Access~3 min read

Final Assignment - Engineering Drawing & Design

Sign in or enroll to access the full lecture notes and interactive reader.

Module 8 • Subtopic 5•56 characters of authentic academic content

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
Engineering Drawing & Design
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
24 Lectures
1 week
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for Engineering Drawing & Design.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

Engineering Drawing & Design — B.Eng | PAMCET