Skip to main content
ND DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

National Diploma (ND) in Civil Engineering Technology: Surveying, Mechanics, Materials, Geotechnics, Hydraulics & Construction Practice

NBTE approved two-year National Diploma curriculum for civil engineering technicians in Nigeria. Covers technical drawing, leveling, theodolite traversing, basic soil testing, concrete mix technology, elementary hydraulics, timber and masonry construction, highway subgrades, and workshop practice.

Instructor
Created by PAMCET Learning Team
advanced4 - 8 weeksEnglish

Course Overview

NBTE approved two-year National Diploma curriculum for civil engineering technicians in Nigeria. Covers technical drawing, leveling, theodolite traversing, basic soil testing, concrete mix technology, elementary hydraulics, timber and masonry construction, highway subgrades, and...

Degree Programme Curriculum Context

This course is a curriculum unit of the ND Civil Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
10 Chapters
•
24 Lecture
•
42h
Subtopic 1Document LectureOpen Access~36 min read

Prismatic Compass Surveying, Magnetic Declination & Local Attraction

National Diploma (ND) in Civil Engineering Technology Chapter 1: Engineering Surveying I: Compass, Theodolite & Traverse Computations Lecture 1 Prismatic Compass Surveying, Magnetic Declination & Local Attraction Geodetic angular direction establishes boundary frameworks for civil infrastructure. Understanding prismatic compass optics, Whole Circle Bearings (WCB), magnetic declination corrections,...

Module 1 • Subtopic 1•30,010 characters of authentic academic content
Subtopic 2Document Lecture

Theodolite Geometry, Face-Left/Face-Right Observations & Angle Measurement

National Diploma (ND) in Civil Engineering Technology Chapter 1: Engineering Surveying I: Compass, Theodolite & Traverse Computations Lecture 2 Theodolite Geometry, Face-Left/Face-Right Observations & Angle Measurement Optical and electronic theodolites provide precise horizontal and vertical angular metrology for civil infrastructure. Mastering the primary instrument axes, Face-Left (FL) and Face...

Module 1 • Subtopic 2
Subtopic 3Document Lecture

Traverse Computations: Latitudes, Departures & Bowditch (Compass) Rule Balancing

National Diploma (ND) in Civil Engineering Technology Chapter 1: Engineering Surveying I: Compass, Theodolite & Traverse Computations Lecture 3 Traverse Computations: Latitudes, Departures & Bowditch (Compass) Rule Balancing Rigorous traverse calculations transform raw field angles and distances into orthogonal plane coordinates. Mastering latitudes, departures, linear misclosure calculations, and...

Module 1 • Subtopic 3
Subtopic 1Document Lecture

Direct Stress, Strain, Hooke’s Law, Elastic Moduli & Factor of Safety

National Diploma (ND) in Civil Engineering Technology Chapter 2: Applied Mechanics & Strength of Materials Lecture 4 Direct Stress, Strain, Hooke’s Law, Elastic Moduli & Factor of Safety The mechanical response of civil engineering materials under uniaxial and multi-axial loading governs structural safety. Understanding normal stress, tensile strain, Hooke’s Law proportionality, Young’s Modulus ($...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

Shear Force & Bending Moment Diagrams for Determinate Beams

National Diploma (ND) in Civil Engineering Technology Chapter 2: Applied Mechanics & Strength of Materials Lecture 5 Shear Force & Bending Moment Diagrams for Determinate Beams Internal shear forces and bending moments govern the sizing of structural flexural members. Mastering differential relationships ($w = -dV/dx$, $V = dM/dx$), point of contraflexure identification, and constructing Shear For...

Module 2 • Subtopic 2
Subtopic 3Document Lecture

Flexural Bending Formula, Section Modulus & Horizontal Shear Stresses

National Diploma (ND) in Civil Engineering Technology Chapter 2: Applied Mechanics & Strength of Materials Lecture 6 Flexural Bending Formula, Section Modulus & Horizontal Shear Stresses Transverse loads induce longitudinal flexural stresses and complementary horizontal shear stresses across beam cross sections. Mastering the Navier-Bernoulli bending formula ($\sigma = M \cdot y / I$), second mome...

Module 2 • Subtopic 3
Subtopic 1Document Lecture

DOE / BRE Concrete Mix Design Method: Target Mean Strength & Free Water

National Diploma (ND) in Civil Engineering Technology Chapter 3: Concrete Technology & Construction Materials Lecture 7 DOE / BRE Concrete Mix Design Method: Target Mean Strength & Free Water Prescriptive nominal batching fails to satisfy modern structural durability and characteristic strength standards. Mastering the British DOE/BRE mix design algorithm, characteristic strength margins ($f_{cm}...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Compressive Strength Testing of Concrete Cubes & Cylinders (BS EN 12390-3)

National Diploma (ND) in Civil Engineering Technology Chapter 3: Concrete Technology & Construction Materials Lecture 8 Compressive Strength Testing of Concrete Cubes & Cylinders (BS EN 12390-3) Destructive compressive strength testing certifies structural concrete conformity before building handover. Mastering cube casting protocols, curing tank water temperatures (20 ± 2°C), testing machine load...

Module 3 • Subtopic 2
Subtopic 3Document Lecture

Non-Destructive Testing (NDT): Schmidt Rebound Hammer, UPV & Core Extraction

National Diploma (ND) in Civil Engineering Technology Chapter 3: Concrete Technology & Construction Materials Lecture 9 Non-Destructive Testing (NDT): Schmidt Rebound Hammer, UPV & Core Extraction Evaluating in-situ concrete quality without damaging load-bearing elements is essential when cube tests fail or structural integrity is disputed. Mastering the Schmidt rebound hammer, Ultrasonic Pulse Ve...

Module 3 • Subtopic 3
Subtopic 1Document Lecture

Phase Relations, Void Ratio, Porosity, Moisture Content & Unit Weights

National Diploma (ND) in Civil Engineering Technology Chapter 4: Soil Mechanics & Geotechnical Testing Lecture 10 Phase Relations, Void Ratio, Porosity, Moisture Content & Unit Weights Soil is a three-phase particulate system comprising solid mineral grains, pore water, and pore air. Understanding phase diagrams, void ratio ($e$), porosity ($n$), degree of saturation ($S$), moisture content ($w$),...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Plasticity Index)

National Diploma (ND) in Civil Engineering Technology Chapter 4: Soil Mechanics & Geotechnical Testing Lecture 11 Soil Consistency: Atterberg Limits (Liquid Limit, Plastic Limit, Plasticity Index) Fine-grained cohesive soils transition through solid, semi-solid, plastic, and liquid behavioral states as moisture content changes. Mastering the Casagrande cup, cone penetrometer, rolling plastic threa...

Module 4 • Subtopic 2
Subtopic 3Document Lecture

Standard & Modified Proctor Compaction & Field Sand Cone Density Testing

National Diploma (ND) in Civil Engineering Technology Chapter 4: Soil Mechanics & Geotechnical Testing Lecture 12 Standard & Modified Proctor Compaction & Field Sand Cone Density Testing Mechanical soil compaction increases dry density, enhances shear strength, reduces permeability, and prevents highway subgrade settlement. Mastering Standard Proctor (2.5 kg rammer) vs Modified Proctor (4.5 kg ram...

Module 4 • Subtopic 3
Subtopic 1Document Lecture

Fluid Statics: Hydrostatic Pressure, Pascal’s Law & Total Thrust on Submerged Surfaces

National Diploma (ND) in Civil Engineering Technology Chapter 5: Elementary Fluid Mechanics & Hydraulics Lecture 13 Fluid Statics: Hydrostatic Pressure, Pascal’s Law & Total Thrust on Submerged Surfaces Fluids at rest exert normal pressures that increase linearly with depth under gravity. Understanding hydrostatic pressure distributions ($p = ho \cdot g \cdot h$), Pascal’s law, total resultant hyd...

Module 5 • Subtopic 1
Subtopic 2Document Lecture

Fluid Dynamics: Continuity Equation, Bernoulli’s Energy Equation & Venturi Meter

National Diploma (ND) in Civil Engineering Technology Chapter 5: Elementary Fluid Mechanics & Hydraulics Lecture 14 Fluid Dynamics: Continuity Equation, Bernoulli’s Energy Equation & Venturi Meter Fluid motion is governed by the conservation of mass, energy, and momentum. Understanding the Continuity Equation ($A_1 v_1 = A_2 v_2$), Bernoulli’s total energy theorem ($z + \frac{p}{\gamma} + \frac{v^...

Module 5 • Subtopic 2
Subtopic 1Document Lecture

Substructure Systems: Strip Footings, Pad Footings & Damp-Proof Courses (DPC)

National Diploma (ND) in Civil Engineering Technology Chapter 6: Building Technology & Reinforced Concrete Detailing Lecture 15 Substructure Systems: Strip Footings, Pad Footings & Damp-Proof Courses (DPC) Substructures transmit superstructure column and wall loads to underlying bearing strata while excluding subterranean moisture. Mastering strip footing projection rules ($P \le T$), pad footing...

Module 6 • Subtopic 1
Subtopic 2Document Lecture

Superstructure Systems: Masonry Bonds, RC Slabs, Lintels & Structural Detailing

National Diploma (ND) in Civil Engineering Technology Chapter 6: Building Technology & Reinforced Concrete Detailing Lecture 16 Superstructure Systems: Masonry Bonds, RC Slabs, Lintels & Structural Detailing Superstructure elements provide spatial enclosure and structural load resistance against gravity and environmental hazards. Mastering masonry bonding arrangements (Stretcher, English, Flemish)...

Module 6 • Subtopic 2
Subtopic 1Document Lecture

Route Location, Earthwork Mass-Haul Diagrams & Subgrade Soil Evaluation (CBR Testing)

National Diploma (ND) in Civil Engineering Technology Chapter 7: Highway Engineering & Road Materials Lecture 17 Route Location, Earthwork Mass-Haul Diagrams & Subgrade Soil Evaluation (CBR Testing) Highway engineering establishes vital transportation corridors through terrain optimization, mass earthwork balancing, and geotechnical subgrade characterization. Mastering route reconnaissance, prismo...

Module 7 • Subtopic 1
Subtopic 2Document Lecture

Flexible & Rigid Pavement Materials, Bitumen Testing & Compaction Control

National Diploma (ND) in Civil Engineering Technology Chapter 7: Highway Engineering & Road Materials Lecture 18 Flexible & Rigid Pavement Materials, Bitumen Testing & Compaction Control Pavements transfer concentrated wheel loads safely to underlying subgrades through layered structural mechanics. Understanding flexible versus rigid pavement load distribution, bitumen physical characterization (p...

Module 7 • Subtopic 2
Subtopic 1Document Lecture

Water Supply Sources, Physical-Chemical Testing & Coagulation/Sedimentation

National Diploma (ND) in Civil Engineering Technology Chapter 8: Environmental Engineering & Sanitation Lecture 19 Water Supply Sources, Physical-Chemical Testing & Coagulation/Sedimentation Potable water supply is the foundational infrastructure safeguard for public health and urban disease prevention. Mastering raw water catchment assessment, physical-chemical water quality metrology, jar-test c...

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Wastewater Characteristics, Sewerage Hydraulics & Septic Tank / Soakaway Design

National Diploma (ND) in Civil Engineering Technology Chapter 8: Environmental Engineering & Sanitation Lecture 20 Wastewater Characteristics, Sewerage Hydraulics & Septic Tank / Soakaway Design Sanitary engineering protects communities against pathogenic contamination through proper wastewater collection and on-site treatment. Mastering sewage biochemical characteristics (BOD5, COD, TSS), circula...

Module 8 • Subtopic 2
Subtopic 1Document Lecture

Measurement of Civil Engineering Works (CESMM/BESMM) & Earthwork Take-Off

National Diploma (ND) in Civil Engineering Technology Chapter 9: Civil Engineering Quantities & Cost Estimating Lecture 21 Measurement of Civil Engineering Works (CESMM/BESMM) & Earthwork Take-Off Accurate quantity surveying and cost estimating provide the commercial foundation for civil infrastructure procurement. Mastering standard measurement methodologies (CESMM4 / BESMM4), dimension paper rec...

Module 9 • Subtopic 1
Subtopic 2Document Lecture

Concrete, Formwork & Reinforcement Take-Off, Bill of Quantities (BQ) Preparation & Unit Costing

National Diploma (ND) in Civil Engineering Technology Chapter 9: Civil Engineering Quantities & Cost Estimating Lecture 22 Concrete, Formwork & Reinforcement Take-Off, Bill of Quantities (BQ) Preparation & Unit Costing Structural concrete works represent the major cost driver in civil infrastructure projects. Mastering in-situ concrete mensuration (CESMM Class F), formwork contact area take-off (C...

Module 9 • Subtopic 2
Subtopic 1Document Lecture

Construction Site Health, Safety, Welfare & Risk Assessment (OSHA / Factories Act)

National Diploma (ND) in Civil Engineering Technology Chapter 10: Construction Safety, Technical Supervision & SIWES Practice Lecture 23 Construction Site Health, Safety, Welfare & Risk Assessment (OSHA / Factories Act) Civil engineering construction sites present extreme occupational hazards involving heavy earthmoving plant, deep excavation cave-ins, work at height, and structural collapses. Mas...

Module 10 • Subtopic 1
Subtopic 2Document Lecture

Engineering Technician Practice, Site Supervision, Quality Assurance & SIWES Capstone

National Diploma (ND) in Civil Engineering Technology Chapter 10: Construction Safety, Technical Supervision & SIWES Practice Lecture 24 Engineering Technician Practice, Site Supervision, Quality Assurance & SIWES Capstone The Civil Engineering Technician represents the frontline operational bridge between engineering theory and physical field construction execution. Mastering technical site super...

Module 10 • Subtopic 2

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
National Diploma (ND) in Civil Engineering Technology: Surveying, Mechanics, Materials, Geotechnics, Hydraulics & Construction Practice
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

10 Chapters
24 Lectures
4 - 8 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for National Diploma (ND) in Civil Engineering Technology: Surveying, Mechanics, Materials, Geotechnics, Hydraulics & Construction Practice.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.