Skip to main content
ND DegreeFaculty of Faculty of Engineering & TechnologyMechanical Engineering

Mechanical Engineering ND 1 - Engineering Drawing

Complete Mechanical Engineering ND 1 - Engineering Drawing course with lessons, quizzes and practical questions

Instructor
Created by PAMCET Learning Team
1 Student Enrolledbeginner1 weekEnglish

Course Overview

Complete Mechanical Engineering ND 1 - Engineering Drawing course with lessons, quizzes and practical questions Curriculum Structure & Core Modules: • 1. Fundamentals of Engineering Design & Mathematical Modeling • 2. Engineering Drawing Standards, Orthographic & Isometric...

What You'll Learn

  • Understand and apply the principles of Introduction to Engineering Drawing
  • Work confidently through Geometric Construction and its practical applications
  • Analyse real-world scenarios involving Orthographic Projection
  • Develop applied skills in Projection of Solids
  • Critically evaluate approaches to Sectional Views

Requirements

  • No prior Polytechnic - Mechanical Engineering (ND/HND) knowledge required — this course starts from the fundamentals
  • A computer, tablet or smartphone with a stable internet connection
  • Willingness to commit regular study time to complete lessons, quizzes and assignments

Degree Programme Curriculum Context

This course is a curriculum unit of the ND Mechanical Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
10 Chapters
•
30 Lecture
•
0s
Subtopic 1Document Lecture

Engineering Drawing Foundations: ISO Standards, Formats & Line Conventions

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Core Theory & Drafting Standards Engineering Drawing Foundations: ISO Standards, Drawing Sheet Formats, Line Types & Technical Lettering BS 8888 and ISO 128 conventions, ISO 216 paper geometry, standardized line weights, title block architecture (ISO 7200), and engineering scale selection. 1. The Role of Technical Dr...

Module 1 • Subtopic 1
Subtopic 2Document Lecture

Applied Geometric Constructions: Tangency, Polygons & Scale Calculations

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Worked Problems & Applied Geometry Applied Geometric Constructions: Tangency, Regular Polygons, Conic Sections & Scale Mathematical Modeling Geometric construction protocols, tangent arcs connecting non-parallel profiles, concentric circle ellipse construction, and engineering scale factor calculations. 1. Engineerin...

Module 1 • Subtopic 2
Subtopic 3Document Lecture

National Diploma Practical Exercises: Sheet Allocation & Geometric Problem Sets

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Assessment & Practice Problems National Diploma Practice Exercises: Geometric Layouts, Tangency Proofs & Technical Drawing Standards Evaluative problem sets covering sheet utilization calculations, internal/external tangency conditions, polygon constructions, and drawing audit protocols. 1. Practice Problem 1: Scale...

Module 1 • Subtopic 3
Subtopic 1Document Lecture

Orthographic Projection Theory: First Angle vs. Third Angle Systems

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Core Theory & Projection Systems Orthographic Projection Theory: First Angle vs. Third Angle Systems, Dihedral Planes & View Relationships ISO 5456-2 conventions, spatial quadrants, horizontal and vertical reference planes, standard projection symbols, and six principal orthographic views. 1. The Geometry of Multi-Vi...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

Multi-View Projection Modeling: Step-by-Step Slotted Bracket Derivation

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Worked Problems & Applied Projection Multi-View Projection Modeling: Step-by-Step Derivation of Slotted Bearing Bracket Complete worked conversion of a 3D isometric bracket into first angle orthographic elevations, hidden detail tracking, and $45^\circ$ miter line transfer. 1. Component Specification: Slotted Bearing...

Module 2 • Subtopic 2
Subtopic 3Document Lecture

National Diploma Projection Problems: Multi-View Reconstruction & Isometric Drawing

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101 Technical Drawing Assessment & Practice Problems National Diploma Projection Problems: Multi-View Reconstruction & Isometric Interpretation Evaluative exercises covering missing view extraction, hidden detail resolution, projection angle identification, and isometric box layout. 1. Practice Problem 1: Determining Missing View and Proj...

Module 2 • Subtopic 3
Subtopic 1Document Lecture

Statics of Rigid Bodies: Force Systems, Vectors & Equilibrium Principles

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 113 Applied Mechanics Core Theory & Vector Statics Statics of Rigid Bodies: Force Systems, Vector Resolution, Free-Body Diagrams & Equilibrium Principles Coplanar concurrent and non-concurrent force systems, analytical vector resolution, free-body diagram architecture, Lami's theorem, Varignon's principle, and static determinacy. 1. Force...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Worked Structural Analysis: Beam Reaction Derivations & Truss Equilibrium

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 113 Applied Mechanics Worked Problems & Structural Calculations Worked Structural Analysis: Beam Reaction Derivations & Pin-Jointed Truss Equilibrium Complete analytical solutions for simply supported beams carrying distributed and point loads, and internal member force determination using Method of Joints. 1. Worked Problem 1: Beam Suppo...

Module 3 • Subtopic 2
Subtopic 3Document Lecture

National Diploma Mechanics Problem Sets: Shear Force & Bending Moment Distributions

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 113 Applied Mechanics Assessment & Practice Problems National Diploma Mechanics Problem Sets: Shear Force & Bending Moment Diagrams (SFD/BMD) Evaluative exercises covering cantilever and simply supported shear force and bending moment distributions, point of contraflexure, and maximum moment location. 1. Practice Problem 1: SFD and BMD fo...

Module 3 • Subtopic 3
Subtopic 1Document Lecture

Mechanical Properties: Direct Stress, Elastic Strain, Hooke's Law & Safety

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 121 Strength of Materials Core Theory & Mechanical Behavior Mechanical Properties of Engineering Materials: Direct Stress, Elastic Strain, Hooke's Law & Safety Factors Normal and shear stress formulations, Young's modulus, Poisson's ratio, bulk modulus, tensile testing protocols (ISO 6892), and working stress design criteria. 1. Direct St...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

Worked Mechanics Calculations: Stepped Shafts, Thermal Stresses & Composite Bars

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 121 Strength of Materials Worked Problems & Elastic Calculations Worked Mechanics Calculations: Stepped Shaft Elongations, Thermal Stresses & Composite Bars Complete analytical solutions for multi-diameter stepped bars, thermal expansion constraints, and parallel composite material load sharing. 1. Worked Problem 1: Axial Elongation of a...

Module 4 • Subtopic 2
Subtopic 3Document Lecture

National Diploma Strength Problems: Composite Load Sharing & Bolted Joint Shear

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 121 Strength of Materials Assessment & Practice Problems National Diploma Strength of Materials Problems: Composite Bar Load Sharing & Bolted Joint Shear Design Evaluative problem sets covering parallel composite column stress distribution, modular ratio, and double shear bolted joint failure modes. 1. Practice Problem 1: Parallel Composi...

Module 4 • Subtopic 3
Subtopic 1Document Lecture

Fundamentals of Fluid Mechanics & Thermodynamics: Pressure & Governing Laws

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 122 Thermofluids Core Theory & Governing Principles Fundamentals of Fluid Mechanics & Thermodynamics: Pressure, Continuity, Bernoulli & First Law Hydrostatic pressure distribution, Pascal's principle, steady flow continuity, Bernoulli's energy equation, non-flow energy equation (NFEE), and steady flow energy equation (SFEE). 1. Fluid Stat...

Module 5 • Subtopic 1
Formative Assessment10 Points • 15 Mins

Mid-Course Progress Assessment

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Sectional Views

Module 5 • Formative Assessment
Subtopic 3Document Lecture

Worked Thermofluid Calculations: Venturi Meters & Polytropic Gas Expansions

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 122 Thermofluids Worked Problems & Flow Calculations Worked Thermofluid Calculations: Venturi Meter Flow Rates & Closed System Gas Expansions Complete worked derivations for differential manometer flow measurement, discharge coefficient calibration, and polytropic gas compression work. 1. Worked Problem 1: Flow Rate Measurement Using a Ho...

Module 5 • Subtopic 3
Subtopic 4Document Lecture

National Diploma Thermofluids Problems: Pipe Friction & Heat Conduction Sizing

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 122 Thermofluids Assessment & Practice Problems National Diploma Thermofluids Problems: Pipe Friction Losses & Heat Conduction Sizing Evaluative exercises covering Darcy-Weisbach frictional head loss, Reynolds number laminar/turbulent classification, and multi-layer thermal conduction resistance. 1. Practice Problem 1: Pipe Friction and P...

Module 5 • Subtopic 4
Subtopic 5Open Access~3 min read

Mid-Semester Case Study & Research Paper

Sign in or enroll to access the full lecture notes and interactive reader.

Module 5 • Subtopic 5•137 characters of authentic academic content
Subtopic 1Document Lecture

DC Circuit Analysis: Ohm's Law, Kirchhoff's Laws & Resistive Networks

NBTE Curriculum: ND Mechanical Engineering Technology | EEC 115 Electrical Fundamentals Core Theory & DC Network Laws Direct Current Circuit Analysis: Ohm's Law, Kirchhoff's Laws, Resistive Networks & Power Dissipation Electric current, potential difference, electrical resistance, resistivity temperature coefficients, Kirchhoff's laws (KCL/KVL), and Delta-Star ($\Delta-Y$) network equivalence. 1....

Module 6 • Subtopic 1
Subtopic 2Document Lecture

Worked Circuit Analysis: Multi-Loop KVL & Thévenin Equivalents

NBTE Curriculum: ND Mechanical Engineering Technology | EEC 115 Electrical Fundamentals Worked Problems & Circuit Theorems Worked Circuit Analysis: Multi-Loop KVL Mesh Derivations & Thévenin Equivalent Circuits Complete analytical solutions for two-mesh DC networks, open-circuit voltage ($V_{ ext{th}}$), internal equivalent resistance ($R_{ ext{th}}$), and maximum power transfer matching. 1. Worke...

Module 6 • Subtopic 2
Subtopic 3Document Lecture

National Diploma Electrical Problems: AC Series RLC & Power Factor

NBTE Curriculum: ND Mechanical Engineering Technology | EEC 115 Electrical Fundamentals Assessment & AC Circuit Calculations National Diploma Electrical Problems: AC Series RLC Circuits & Power Factor Correction Evaluative problem sets covering sinusoidal alternating current impedance, inductive/capacitive reactance, three-phase power calculations, and plant power factor improvement. 1. Practice P...

Module 6 • Subtopic 3
Subtopic 1Document Lecture

CAD Environment, Coordinate Systems & 2D Geometric Entity Construction

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102 / MEC 107 CAD I Core Theory & Digital Interface CAD Environment, Coordinate Systems & 2D Geometric Entity Construction Digital drawing environment setup, User Coordinate System (UCS) vs. World Coordinate System (WCS), Cartesian and polar entry formats, precision snap modes, layer hierarchies, and line styling per ISO 128 / BS 8888. 1....

Module 7 • Subtopic 1
Subtopic 2Document Lecture

Parametric Sketching, Geometric Constraints & Flanged Component Modeling

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102 / MEC 107 CAD I Worked Engineering Modeling Parametric Sketching, Geometric Constraints & Flanged Component Modeling Analytical derivation and command workflows for an industrial pipe flange: pitch circle diameter (PCD), polar bolt arrays, fillet transitions, and digital mass property verification. 1. Worked Engineering Problem: Stand...

Module 7 • Subtopic 2
Subtopic 3Document Lecture

National Diploma CAD Practical Exercises: Machine Parts & Hatching Standards

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102 / MEC 107 CAD I Practical Exercises & Assessment National Diploma CAD Practical Exercises: Machine Parts & Hatching Standards Evaluative studio exercises: slotted rocker arm geometric construction, section hatching rules per ISO 128-50, viewport scaling, and plotting sheet layouts. 1. Practical Exercise 1: Slotted Rocker Arm 2D Geomet...

Module 7 • Subtopic 3
Subtopic 1Document Lecture

Engineering Ethics, COREN Regulations & Industrial Safety Frameworks

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 108 Engineering Practice Ethics & Statutory Regulation Engineering Ethics, COREN Regulations & Industrial Safety Frameworks The statutory governance of engineering practice in Nigeria under COREN, codes of professional conduct, public safety paramountcy, industrial safety legislation, and the Hierarchy of Risk Controls. 1. Statutory Gover...

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Case Studies in Engineering Ethics: Whistleblowing, Structural Failures & Safety Protocols

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 108 Engineering Practice Engineering Case Analysis Case Studies in Engineering Ethics: Whistleblowing, Structural Failures & Safety Protocols Detailed technical forensic analyses of historical engineering catastrophes: the Challenger solid rocket motor joint, pressure vessel rupture protocols, and counterfeit structural material testing....

Module 8 • Subtopic 2
Subtopic 3Document Lecture

Project Management in Engineering: Critical Path Method (CPM), PERT & Risk Matrix

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 108 Engineering Practice Project Planning & Risk Analysis Project Management in Engineering: Critical Path Method (CPM), PERT & Risk Matrix Quantitative scheduling for plant turnaround maintenance: forward/backward pass algorithms, total float, PERT probabilistic duration estimates, and 5x5 quantitative risk ranking. 1. Worked Project Sch...

Module 8 • Subtopic 3
Subtopic 1Document Lecture

Mechanical Assembly Drawing Principles, Sectioning & Exploded Projections

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101/102 Technical Drawing II Core Assembly Principles Mechanical Assembly Drawing Principles, Sectioning & Exploded Projections Assembly drawing classifications, sectional representation of mechanical couplings and gearboxes, cross-hatching conventions for mating parts, non-sectioned solid elements, and balloon callouts per ISO 10209 / BS...

Module 9 • Subtopic 1
Subtopic 2Document Lecture

Bill of Materials (BOM), Part Lists & Engineering Itemization Standards

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101/102 Technical Drawing II BOM & Parts Itemization Bill of Materials (BOM), Part Lists & Engineering Itemization Standards Structure and column syntax of engineering parts lists per ISO 7573, parent-child indented BOM architectures, raw material calculations, and a complete worked BOM for an industrial rigid flanged coupling. 1. Enginee...

Module 9 • Subtopic 2
Subtopic 3Document Lecture

Limits, Tolerances, Fits & Surface Texture Symbols (ISO 286 & ISO 1302)

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 101/102 Technical Drawing II Metrology & Precision Tolerances Limits, Tolerances, Fits & Surface Texture Symbols (ISO 286 & ISO 1302) The ISO limit system, hole-basis vs. shaft-basis fits, fundamental deviation letter codes, tolerance grades IT01-IT16, clearance/interference derivations, and surface finish roughness notation. 1. The ISO S...

Module 9 • Subtopic 3
Subtopic 1Document Lecture

Parametric 2D/3D Modeling, Assembly Constraints & Kinematic Mates

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102/107 CAD II Parametric 3D Modeling Parametric 2D/3D Modeling, Assembly Constraints & Kinematic Mates Feature-based 3D solid construction, sketch constraints, assembly degrees of freedom (DOF), kinematic joint mates, and automated digital interference checking. 1. The Architecture of Parametric Feature-Based Solid Modeling Modern mechan...

Module 10 • Subtopic 1
Formative Assessment10 Points • 15 Mins

Comprehensive End-of-Course Examination

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Test your knowledge of Introduction to CAD

Module 10 • Formative Assessment
Subtopic 3Document Lecture

Digital Product Data Management (PDM), Neutral CAD Formats & CNC G-Code Interface

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102/107 CAD II PDM & Digital Manufacturing Digital Product Data Management (PDM), Neutral CAD Formats & CNC G-Code Interface Product Data Management (PDM) revision control, neutral file exchange protocols (STEP, IGES, DXF, STL), Computer-Aided Manufacturing (CAM), and CNC G-code post-processing fundamentals. 1. Engineering Data Architectu...

Module 10 • Subtopic 3
Subtopic 4Document Lecture

Technical Drawing Plotting, Sheet Layouts, Title Blocks & Production Sign-Off

NBTE Curriculum: ND Mechanical Engineering Technology | MEC 102/107 CAD II Technical Output & Standards Compliance Technical Drawing Plotting, Sheet Layouts, Title Blocks & Production Sign-Off Standard drawing sheet layouts per ISO 216 / ISO 5457, ISO 7200 title block specifications, pen table lineweight assignments (CTB), projection symbol standards, and engineering release checklists. 1. Standar...

Module 10 • Subtopic 4

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
Mechanical Engineering ND 1 - Engineering Drawing
Free$17.99100% Off
Certificate available separately for $7 after completion

Course Includes

10 Chapters
30 Lectures
1 week
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: Polytechnic - Mechanical Engineering (ND/HND)
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for Mechanical Engineering ND 1 - Engineering Drawing.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.