Skip to main content
BS DegreeFaculty of Faculty of Engineering & TechnologyCivil Engineering

BS in Civil Engineering (ABET Accreditation & ASCE / FE Exam Standards)

Four-year American civil engineering degree curriculum accredited under ABET EAC criteria and aligned with ASCE Body of Knowledge (BOK3) and NCEES FE Civil exam specifications. Covers statics, mechanics of materials, structural analysis, ACI 318 reinforced concrete, AISC 360 steel design, geotechnical foundation analysis, water resources, and transportation.

Instructor
Created by PAMCET Learning Team
advanced4 - 8 weeksEnglish

Course Overview

Four-year American civil engineering degree curriculum accredited under ABET EAC criteria and aligned with ASCE Body of Knowledge (BOK3) and NCEES FE Civil exam specifications. Covers statics, mechanics of materials, structural analysis, ACI 318 reinforced concrete, AISC 360...

Degree Programme Curriculum Context

This course is a curriculum unit of the BS in Civil Engineering degree framework in United States.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
24 Lecture
•
42h
Subtopic 1Document Lecture

Equilibrium of Rigid Bodies, Truss Analysis (Method of Joints & Sections) & Zero-Force Members

# Equilibrium of Rigid Bodies & Truss Analysis (FE Civil Exam) ### Executive Overview & ABET Curriculum Criteria Under ABET Engineering Accreditation Commission (EAC) criteria and the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering (FE) Civil Exam specifications, statics and truss mechanics form the foundation of structural analysis. Planar and spati...

Module 1 • Subtopic 1
Subtopic 2Document Lecture

Mechanics of Deformable Bodies: Normal/Shear Stresses, Torsion of Circular Shafts & Thermal Expansion

# Mechanics of Deformable Bodies: Stress, Strain & Torsion ### Executive Overview & NCEES FE Mechanics Mechanics of deformable bodies establishes the relationship between internal stresses ($\sigma, \tau$) and physical material deformations ($\varepsilon, \gamma$). Under the NCEES FE Reference Handbook, civil engineers must analyze elastic axial deformations, indeterminate thermal strain restraint...

Module 1 • Subtopic 2
Subtopic 3Document Lecture

Centroids, Second Moments of Area (Parallel Axis Theorem) & In-Plane Shear Flow in Built-Up Beams

# Centroids, Moments of Inertia & Shear Flow in Built-Up Beams ### Executive Overview & Sectional Properties Structural flexural behavior is controlled by cross-sectional geometry. Calculating centroidal neutral axes ($\bar{y}$), principal moments of inertia ($I_x, I_y$), and horizontal shear flow ($q$) between connected plate elements governs the capacity of built-up steel plate girders and naile...

Module 1 • Subtopic 3
Subtopic 1Document Lecture

Müller-Breslau Principle & Qualitative Influence Lines for Continuous Beams & Bridge Girders

# Müller-Breslau Principle & Influence Lines for Bridges ### Executive Overview & Moving Vehicle Mechanics Unlike static building floor dead loads, highway and railway bridge live loads move continuously along the span. An influence line graphs the variation of an internal structural reaction, shear force, or bending moment at a *fixed specific point* as a unit concentrated vertical load moves acr...

Module 2 • Subtopic 1
Subtopic 2Document Lecture

Cross's Moment Distribution Method (Hardy Cross): Distribution Factors, Carry-Over & Sway Corrections

# Hardy Cross Moment Distribution Method ### Executive Overview & Classic Iterative Frame Analysis Developed by Professor Hardy Cross at the University of Illinois in 1930, the Moment Distribution Method bypassed complex simultaneous equations to provide structural engineers with a rapid, convergent manual iterative calculation scheme for indeterminate continuous beams and rigid frames. This lectu...

Module 2 • Subtopic 2
Subtopic 3Document Lecture

Direct Stiffness Method for 2D Trusses & Beams: Global Coordinate Transformations & Nodal Degrees of Freedom

# Direct Stiffness Method for 2D Trusses & Beams ### Executive Overview & Computational Mechanics Modern structural analysis software solves skeletal frames by assembling the global equilibrium equation: $$\mathbf{K} \mathbf{D} = \mathbf{F}$$ where $\mathbf{K}$ is the structural global stiffness matrix, $\mathbf{D}$ is the vector of unconstrained nodal displacements, and $\mathbf{F}$ is the vector...

Module 2 • Subtopic 3
Subtopic 1Document Lecture

ASTM & AASHTO Soil Classification Systems & Standard Proctor/Modified Proctor Compaction Mechanics

# ASTM & AASHTO Soil Classification & Proctor Compaction ### Executive Overview & Geotechnical Standards In the United States, geotechnical site characterization and earthwork compaction adhere to ASTM International (ASTM D2487 / USCS) and AASHTO (AASHTO M 145) standards. Soil classification directs subgrade suitability evaluations for highways, runways, and earth dams. Concurrently, Proctor compa...

Module 3 • Subtopic 1
Subtopic 2Document Lecture

Rankine & Coulomb Earth Pressure Theories & External Stability of Gravity Retaining Walls

# Earth Pressure Theories & Retaining Wall Stability (AASHTO) ### Executive Overview & Geotechnical Retention Cast-in-place reinforced concrete cantilever retaining walls and mass gravity walls must resist active lateral soil pressures without sliding, overturning, or exceeding subgrade bearing capacity. Under AASHTO LRFD Bridge Design Specifications and classical soil mechanics, earth pressures a...

Module 3 • Subtopic 2
Subtopic 3Document Lecture

Deep Foundation Axial/Lateral Capacity: Reese-O'Neill Drilled Shafts & P-Y Curves for Lateral Loading

# Drilled Shaft Capacity & p-y Curve Analysis for Lateral Piles ### Executive Overview & Deep Foundation Mechanics Large-diameter cast-in-drilled-hole (CIDH) shafts and driven steel H-piles carrying bridge piers must resist massive lateral wind, stream current, and seismic inertial shears in addition to axial gravity loads. In American practice (FHWA GEC-010 / AASHTO), axial shaft capacity is desi...

Module 3 • Subtopic 3
Subtopic 1Document Lecture

Rational Method & NRCS (SCS) Curve Number (CN) Method for Peak Storm Runoff

# Rational Method & NRCS (SCS) Curve Number Runoff Modeling ### Executive Overview & Surface Hydrology Urban stormwater drainage design, culvert sizing, and retention basin planning rely on deterministic rainfall-runoff models. In American practice, the Rational Method governs peak runoff estimation for small urban catchments ($< 200\text{ acres}$ / $80\text{ ha}$), while the Natural Resources Con...

Module 4 • Subtopic 1
Subtopic 2Document Lecture

HEC-RAS 1D Steady Flow River Hydraulics: Standard Step Method & Bridge Waterway Backwater

# HEC-RAS River Hydraulics & Bridge Waterway Backwater ### Executive Overview & USACE River Modeling The US Army Corps of Engineers Hydrologic Engineering Center River Analysis System (HEC-RAS) is the preeminent software package for simulating one-dimensional steady and two-dimensional unsteady flow in natural river channels. Computing bridge backwater, water surface profiles (M1, M2, S1 curves),...

Module 4 • Subtopic 2
Subtopic 3Document Lecture

Groundwater Hydrology: Theis & Cooper-Jacob Non-Equilibrium Well Hydraulics

# Groundwater Hydrology: Theis & Cooper-Jacob Well Hydraulics ### Executive Overview & Hydrogeology Groundwater represents over $50\%$ of municipal drinking water supply across the United States. Evaluating aquifer storage coefficients ($S$), transmissivity ($T$), and cone of depression drawdown $s(r, t)$ induced by municipal pumping wells is governed by non-equilibrium transient radial diffusion...

Module 4 • Subtopic 3
Subtopic 1Document Lecture

ACI 318-19 Strength Design Method: Strength Reduction Factors (Phi), Whitney Stress Block & Tension-Controlled Limits

# ACI 318-19 Strength Design Method & Flexure ### Executive Overview & ACI 318 Code Architecture Building Code Requirements for Structural Concrete (ACI 318-19) governs structural concrete design across the United States. Under the Strength Design Method, factored design loads ($U$) must not exceed design strength ($\phi R_n$): $$U \le \phi R_n$$ ASCE 7 / ACI 318 primary load combinations: $$U = 1...

Module 5 • Subtopic 1
Subtopic 2Document Lecture

One-Way and Two-Way Shear in Footings and Flat Plates (Punching Shear & Shearhead Reinforcement)

# One-Way & Two-Way Punching Shear in Footings & Flat Slabs ### Executive Overview & Shear Limit States In reinforced concrete two-way flat plate floors and isolated column spread footings, concentrated column reactions induce two distinct shear failure modes: 1. **One-Way (Beam) Shear:** Planar diagonal tension crack extending across the entire width $b$ at distance $d$ from the column face. 2. *...

Module 5 • Subtopic 2
Subtopic 3Document Lecture

Short & Slender Columns: P-M Interaction Diagrams & Moment Magnification (ACI 318 Non-Sway vs. Sway Frames)

# ACI 318 Column Interaction & Moment Magnification ### Executive Overview & Second-Order Column Mechanics Reinforced concrete columns carry concurrent axial force $P_u$ and flexural moment $M_u$. Structural capacity is verified using non-dimensional Axial Load-Bending Moment ($P-M$) interaction diagrams defining pure axial compression, balanced failure, and pure tension limits. For slender column...

Module 5 • Subtopic 3
Subtopic 1Document Lecture

AISC 360-16 Specification: LRFD vs ASD Load Combinations, Tension Members & Block Shear Rupture

# AISC 360-16: LRFD vs ASD & Block Shear Rupture ### Executive Overview & AISC Design Philosophy The American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 360-16) integrates two parallel design methodologies: - **Load and Resistance Factor Design (LRFD):** $R_u \le \phi R_n$ ($\phi = 0.90$ for flexure/tension yielding; $0.75$ for rupture). - **Allowable...

Module 6 • Subtopic 1
Subtopic 2Document Lecture

Compact vs. Non-Compact Sections, Flexural Lateral-Torsional Buckling & Plastic Design of W-Shapes

# Flexural Design of W-Shapes & LTB (AISC 360-16 Chapter F) ### Executive Overview & Steel Beam Design Under AISC 360-16 Chapter F, wide-flange (W-shape) beam flexural strength $M_n$ is controlled by three behavioral regimes depending on unbraced length $L_b$: 1. Plastic Moment ($L_b \le L_p$): Full plastic hinge formation ($M_n = M_p$). 2. Inelastic LTB ($L_p < L_b \le L_r$): Interaction of yield...

Module 6 • Subtopic 2
Subtopic 3Document Lecture

Compression Members (Column Curves) & Beam-Columns (AISC Interaction Equations H1-1a and H1-1b)

# AISC Column Design & Beam-Column Interaction (Chapter H) ### Executive Overview & Combined Stresses In multi-story steel building frames, columns simultaneously resist axial compression $P_r$ and biaxial bending moments ($M_{rx}, M_{ry}$). Under AISC 360-16 Chapter E (Compression) and Chapter H (Combined Forces), capacity is verified through column buckling curves and bilinear interaction equati...

Module 6 • Subtopic 3
Subtopic 1Document Lecture

AASHTO Green Book Alignment Design: Design Vehicle swept paths, Superelevation Runoff & Sight Distance

# AASHTO Green Book Geometric Highway Design ### Executive Overview & Transportation Criteria A Policy on Geometric Design of Highways and Streets (the AASHTO "Green Book") is the nationwide standard for geometric road design across the United States. Geometric design harmonizes design vehicle turning envelopes (AutoTURN WB-67 interstate semitrailers), operational design speed, horizontal curvatur...

Module 7 • Subtopic 1
Subtopic 2Document Lecture

Highway Capacity Manual (HCM 6th Edition): Level of Service (LOS) for Basic Freeway Segments & Signalized Intersections

# Highway Capacity Manual (HCM 6th Edition) & Level of Service (LOS) ### Executive Overview & Traffic Operations The Highway Capacity Manual (HCM 6th Edition / TRB) provides computational methodologies for quantifying the operational quality of transportation facilities. Quality of service is categorized into six **Levels of Service (LOS A through LOS F)**. For basic freeway segments, LOS is defin...

Module 7 • Subtopic 2
Subtopic 3Document Lecture

AASHTO Guide for Design of Pavement Structures: Structural Number (SN), Resilient Modulus & Reliability

# AASHTO Pavement Design: Structural Number & Resilient Modulus ### Executive Overview & Pavement Systems The 1993 AASHTO Guide for Design of Pavement Structures remains the dominant empirical-mechanistic design specification for state departments of transportation (DOTs) across America. Flexible pavements are engineered by determining a required Structural Number ($SN$) to resist predicted 18-kip...

Module 7 • Subtopic 3
Subtopic 1Document Lecture

Conventional Municipal Drinking Water Treatment: Coagulation, Flocculation, Sedimentation & Disinfection

# Municipal Drinking Water Treatment & Disinfection Kinetics ### Executive Overview & EPA Safe Drinking Water Act Municipal drinking water systems must comply with the US Environmental Protection Agency (EPA) Safe Drinking Water Act (SDWA) National Primary Drinking Water Regulations. Raw surface waters containing turbidity, colloidal organic matter, and pathogenic cysts (*Giardia lamblia*, *Crypto...

Module 8 • Subtopic 1
Subtopic 2Document Lecture

Air Quality Engineering & Solid Waste Landfill Design (EPA Subtitle D Liners & Leachate Systems)

# Solid Waste Landfills (EPA Subtitle D) & Air Quality Engineering ### Executive Overview & Environmental Containment Municipal solid waste (MSW) disposal in the United States is regulated under Resource Conservation and Recovery Act (RCRA) Subtitle D regulations (40 CFR Part 258). Engineers must design composite containment barrier liners, leachate collection and removal systems (LCRS), landfill...

Module 8 • Subtopic 2
Subtopic 3Document Lecture

ASCE Body of Knowledge (BOK3), FE Civil Exam Strategy & Multi-Disciplinary Capstone Portfolio

# ASCE Body of Knowledge (BOK3) & FE Civil Exam Capstone Defense ### Executive Overview & Professional Licensure Graduating from an ABET EAC-accredited civil engineering degree is the initial step toward becoming a licensed Professional Engineer (PE). The American Society of Civil Engineers (ASCE) Body of Knowledge (3rd Edition / BOK3) defines the 21 foundational, technical, and professional outco...

Module 8 • Subtopic 3

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
BS in Civil Engineering (ABET Accreditation & ASCE / FE Exam Standards)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
24 Lectures
4 - 8 weeks
Skill Level advanced
Taught in English
Lifetime Access
Certification of Completion
Category: University - Civil Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for BS in Civil Engineering (ABET Accreditation & ASCE / FE Exam Standards).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.