Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 311: Control Systems Engineering

Transfer functions, block diagrams, Routh-Hurwitz, root locus, Bode/Nyquist stability, and digital PID controller tuning.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Transfer functions, block diagrams, Routh-Hurwitz, root locus, Bode/Nyquist stability, and digital PID controller tuning. Curriculum Structure & Core Modules: • 1. Introduction to Control Systems: Open-Loop vs Closed-Loop Feedback and Performance Metrics • 2. Mathematical...

What You'll Learn

  • Model dynamic physical electromechanical systems (DC motors, inverted pendulums) as Laplace transfer functions.
  • Simplify complex multi-loop feedback architectures using block diagram reduction and Mason's gain formula.
  • Determine absolute stability of closed-loop systems using the algebraic Routh-Hurwitz stability criterion.
  • Plot root locus trajectories and determine parameter gains for desired transient response characteristics.
  • Design and tune proportional-integral-derivative (PID) controllers for zero steady-state error and low overshoot.

Requirements

  • Completion of CPE 210.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Introduction to Control Systems: Open-Loop vs Closed-Loop Feedback and Performance Metrics: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Introduction to Control Systems: Open-Loop vs Closed-Loop Feedback and Performance Metrics: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Introduction to Control Systems: Open-Loop vs Closed-Loop Fe

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Introduction to Control Systems: Open-Loop vs Closed-Loop Feedback and Performance Metrics. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Mathematical Modeling of Physical Systems: Mechanical, Electrical, and Electromechanical Systems: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Mathematical Modeling of Physical Systems: Mechanical, Electrical, and Electromechanical Systems: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Mathematical Modeling of Physical Systems: Mechanical, Elect

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Mathematical Modeling of Physical Systems: Mechanical, Electrical, and Electromechanical Systems. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Transfer Function Derivation, Block Diagram Reduction, and Signal Flow Graphs (Mason's Rule): Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Transfer Function Derivation, Block Diagram Reduction, and Signal Flow Graphs (Mason's Rule): Computations, Implementation & Verification

CPE 311 • 300L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Transfer Function Derivation, Block Diagram Reduction, and S

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Transfer Function Derivation, Block Diagram Reduction, and Signal Flow Graphs (Mason's Rule). Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Transient and Steady-State Response: Step Input Response, Damping Ratio, and Natural Frequency: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Transient and Steady-State Response: Step Input Response, Damping Ratio, and Natural Frequency: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: Transient and Steady-State Response: Step Input Response, Da

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: Transient and Steady-State Response: Step Input Response, Damping Ratio, and Natural Frequency. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

System Stability: Definition, Poles and Zeros Locations, and the Routh-Hurwitz Stability Criterion: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

System Stability: Definition, Poles and Zeros Locations, and the Routh-Hurwitz Stability Criterion: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: System Stability: Definition, Poles and Zeros Locations, and

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: System Stability: Definition, Poles and Zeros Locations, and the Routh-Hurwitz Stability Criterion. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Root Locus Technique: Rules for Construction, Gain Selection, and Root Contours: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Root Locus Technique: Rules for Construction, Gain Selection, and Root Contours: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Root Locus Technique: Rules for Construction, Gain Selection

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Root Locus Technique: Rules for Construction, Gain Selection, and Root Contours. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Frequency Response Methods: Bode Plots, Gain Margin, Phase Margin, and Nyquist Stability Criterion: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Frequency Response Methods: Bode Plots, Gain Margin, Phase Margin, and Nyquist Stability Criterion: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Frequency Response Methods: Bode Plots, Gain Margin, Phase M

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Frequency Response Methods: Bode Plots, Gain Margin, Phase Margin, and Nyquist Stability Criterion. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

PID Controller Design: Proportional, Integral, Derivative Actions, Ziegler-Nichols Tuning, and Anti-Windup: Theoretical Foundations, Modeling & Architecture

CPE 311 • 300L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

PID Controller Design: Proportional, Integral, Derivative Actions, Ziegler-Nichols Tuning, and Anti-Windup: Computations, Implementation & Verification

CPE 311 • 300L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: PID Controller Design: Proportional, Integral, Derivative Ac

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: PID Controller Design: Proportional, Integral, Derivative Actions, Ziegler-Nichols Tuning, and Anti-Windup. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 311: Control Systems Engineering
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 311: Control Systems Engineering.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CPE 311: Control Systems Engineering | PAMCET University — B.Eng | PAMCET