Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 315: Engineering Design II (Hardware-Software Co-Design & PCB)

Hardware-software partitioning, professional 4-layer PCB design in KiCad, high-speed routing, power distribution, and EMC.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Hardware-software partitioning, professional 4-layer PCB design in KiCad, high-speed routing, power distribution, and EMC. Curriculum Structure & Core Modules: • 1. Hardware-Software Co-Design Methodology: System Specifications and Partitioning Architecture • 2. Hierarchical...

What You'll Learn

  • Perform hardware-software trade-off analysis and partition system tasks between MCU firmware and logic.
  • Design complex schematics with hierarchical sheets, custom library symbols, and electrical rule checks (ERC).
  • Route multi-layer PCBs incorporating solid ground planes, power plane decoupling, and thermal relief pads.
  • Apply high-speed PCB routing guidelines: controlled impedance traces, length matching, and differential pairs.
  • Generate complete manufacturing output files (Gerber RS-274X, drill files, IPC-D-356, pick-and-place files).

Requirements

  • Completion of CPE 218.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Hardware-Software Co-Design Methodology: System Specifications and Partitioning Architecture: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Hardware-Software Co-Design Methodology: System Specifications and Partitioning Architecture: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Hardware-Software Co-Design Methodology: System Specificatio

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Hardware-Software Co-Design Methodology: System Specifications and Partitioning Architecture. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Hierarchical Schematic Capture in KiCad/Altium: Component Selection, Datasheets, and Footprints: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Hierarchical Schematic Capture in KiCad/Altium: Component Selection, Datasheets, and Footprints: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Hierarchical Schematic Capture in KiCad/Altium: Component Se

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Hierarchical Schematic Capture in KiCad/Altium: Component Selection, Datasheets, and Footprints. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Power Delivery Network (PDN) Design: Low-Dropout Regulators, Buck Converters, and Decoupling: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Power Delivery Network (PDN) Design: Low-Dropout Regulators, Buck Converters, and Decoupling: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Power Delivery Network (PDN) Design: Low-Dropout Regulators,

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Power Delivery Network (PDN) Design: Low-Dropout Regulators, Buck Converters, and Decoupling. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Multi-Layer PCB Stackup: 2-Layer vs 4-Layer Stackups and Return Current Path Management: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Multi-Layer PCB Stackup: 2-Layer vs 4-Layer Stackups and Return Current Path Management: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: Multi-Layer PCB Stackup: 2-Layer vs 4-Layer Stackups and Ret

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: Multi-Layer PCB Stackup: 2-Layer vs 4-Layer Stackups and Return Current Path Management. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

High-Speed PCB Layout: Microstrip/Stripline Impedance, Differential Pairs (USB), and Cross-talk: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

High-Speed PCB Layout: Microstrip/Stripline Impedance, Differential Pairs (USB), and Cross-talk: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: High-Speed PCB Layout: Microstrip/Stripline Impedance, Diffe

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: High-Speed PCB Layout: Microstrip/Stripline Impedance, Differential Pairs (USB), and Cross-talk. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Electromagnetic Compatibility (EMC) and Interference (EMI) Mitigation Techniques on PCBs: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Electromagnetic Compatibility (EMC) and Interference (EMI) Mitigation Techniques on PCBs: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Electromagnetic Compatibility (EMC) and Interference (EMI) M

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Electromagnetic Compatibility (EMC) and Interference (EMI) Mitigation Techniques on PCBs. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Design for Assembly (DFA), Design for Test (DFT), Testpoints, and Automated Optical Inspection (AOI): Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Design for Assembly (DFA), Design for Test (DFT), Testpoints, and Automated Optical Inspection (AOI): Computations, Implementation & Verification

CPE 315 • 300L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Design for Assembly (DFA), Design for Test (DFT), Testpoints

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Design for Assembly (DFA), Design for Test (DFT), Testpoints, and Automated Optical Inspection (AOI). Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Fabrication Packages: Gerber Generation, Drill Files, Centroid Pick-and-Place, and Cost Optimization: Theoretical Foundations, Modeling & Architecture

CPE 315 • 300L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Fabrication Packages: Gerber Generation, Drill Files, Centroid Pick-and-Place, and Cost Optimization: Computations, Implementation & Verification

CPE 315 • 300L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: Fabrication Packages: Gerber Generation, Drill Files, Centro

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: Fabrication Packages: Gerber Generation, Drill Files, Centroid Pick-and-Place, and Cost Optimization. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 315: Engineering Design II (Hardware-Software Co-Design & PCB)
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 315: Engineering Design II (Hardware-Software Co-Design & PCB).

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CPE 315: Engineering Design II (Hardware-Software Co-Design & PCB) | PAMCET University — B.Eng | PAMCET