Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 109: Engineering Drawing & Descriptive Geometry

Manual technical drawing, orthographic projection, isometric views, sectioning, and engineering lettering.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Manual technical drawing, orthographic projection, isometric views, sectioning, and engineering lettering. Curriculum Structure & Core Modules: • 1. Drawing Equipment, ISO Standards, Paper Sizes, and Title Blocks • 2. Engineering Lettering, Line Types, and Geometric...

What You'll Learn

  • Produce standard engineering lettering, title blocks, and line weights according to ISO standards.
  • Construct geometric figures, tangencies, ellipses, and involute curves with geometric precision.
  • Draw multi-view first and third angle orthographic projections of complex 3D components.
  • Generate isometric, oblique, and perspective pictorial projections of engineering housings.
  • Apply correct dimensioning, surface texture symbols, and sectional cutting planes to engineering drafts.

Requirements

  • Drawing board, drafting instrument set, tee-square, drawing paper.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Drawing Equipment, ISO Standards, Paper Sizes, and Title Blocks: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Drawing Equipment, ISO Standards, Paper Sizes, and Title Blocks: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Drawing Equipment, ISO Standards, Paper Sizes, and Title Blo

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Drawing Equipment, ISO Standards, Paper Sizes, and Title Blocks. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Engineering Lettering, Line Types, and Geometric Construction: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Engineering Lettering, Line Types, and Geometric Construction: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Engineering Lettering, Line Types, and Geometric Constructio

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Engineering Lettering, Line Types, and Geometric Construction. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Theory of Projection: First Angle and Third Angle Systems: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Theory of Projection: First Angle and Third Angle Systems: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Theory of Projection: First Angle and Third Angle Systems

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Theory of Projection: First Angle and Third Angle Systems. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Multi-View Orthographic Projection of Solid Geometries: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Multi-View Orthographic Projection of Solid Geometries: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: Multi-View Orthographic Projection of Solid Geometries

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: Multi-View Orthographic Projection of Solid Geometries. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Auxiliary Views and True Shapes of Oblique Surfaces: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Auxiliary Views and True Shapes of Oblique Surfaces: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: Auxiliary Views and True Shapes of Oblique Surfaces

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: Auxiliary Views and True Shapes of Oblique Surfaces. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Sectional Views, Hatching Conventions, and Half Sections: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Sectional Views, Hatching Conventions, and Half Sections: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Sectional Views, Hatching Conventions, and Half Sections

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Sectional Views, Hatching Conventions, and Half Sections. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Pictorial Projections: Isometric and Oblique Drawing: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Pictorial Projections: Isometric and Oblique Drawing: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Pictorial Projections: Isometric and Oblique Drawing

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Pictorial Projections: Isometric and Oblique Drawing. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Dimensioning Rules, Tolerances, and Technical Sketching for Hardware: Theoretical Foundations, Modeling & Architecture

CPE 109 • 100L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Dimensioning Rules, Tolerances, and Technical Sketching for Hardware: Computations, Implementation & Verification

CPE 109 • 100L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: Dimensioning Rules, Tolerances, and Technical Sketching for

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: Dimensioning Rules, Tolerances, and Technical Sketching for Hardware. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 109: Engineering Drawing & Descriptive Geometry
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 109: Engineering Drawing & Descriptive Geometry.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.