Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 112: Engineering Materials Science

Structure, crystalline defects, electrical, magnetic, and thermal properties of engineering materials in electronics.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Structure, crystalline defects, electrical, magnetic, and thermal properties of engineering materials in electronics. Curriculum Structure & Core Modules: • 1. Classification of Materials: Metals, Polymers, Ceramics, Composites, and Semiconductors • 2. Crystal Structures, Unit...

What You'll Learn

  • Relate crystal lattices (BCC, FCC, HCP) and Miller indices to material mechanical and electrical behaviors.
  • Analyze stress-strain curves, tensile strength, yield stress, hardness, and fatigue in hardware design.
  • Classify materials into conductors, semiconductors, superconductors, and dielectrics based on band structure.
  • Evaluate ferromagnetic, paramagnetic, and diamagnetic materials for magnetic storage and inductors.
  • Select optimal substrate, conductive, and packaging materials for electronic system longevity.

Requirements

  • Completion of CPE 105.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Classification of Materials: Metals, Polymers, Ceramics, Composites, and Semiconductors: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Classification of Materials: Metals, Polymers, Ceramics, Composites, and Semiconductors: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Classification of Materials: Metals, Polymers, Ceramics, Com

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Classification of Materials: Metals, Polymers, Ceramics, Composites, and Semiconductors. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Crystal Structures, Unit Cells, Miller Indices, and Crystallographic Density: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Crystal Structures, Unit Cells, Miller Indices, and Crystallographic Density: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Crystal Structures, Unit Cells, Miller Indices, and Crystall

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Crystal Structures, Unit Cells, Miller Indices, and Crystallographic Density. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Imperfections in Solids: Point Defects, Dislocations, and Grain Boundaries: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Imperfections in Solids: Point Defects, Dislocations, and Grain Boundaries: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Imperfections in Solids: Point Defects, Dislocations, and Gr

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Imperfections in Solids: Point Defects, Dislocations, and Grain Boundaries. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Mechanical Properties of Materials: Tensile, Hardness, Toughness, and Creep Testing: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Mechanical Properties of Materials: Tensile, Hardness, Toughness, and Creep Testing: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: Mechanical Properties of Materials: Tensile, Hardness, Tough

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: Mechanical Properties of Materials: Tensile, Hardness, Toughness, and Creep Testing. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Electrical Conduction: Energy Band Theory, Mobility, Resistivity, and Temperature Effects: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Electrical Conduction: Energy Band Theory, Mobility, Resistivity, and Temperature Effects: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: Electrical Conduction: Energy Band Theory, Mobility, Resisti

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: Electrical Conduction: Energy Band Theory, Mobility, Resistivity, and Temperature Effects. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Dielectric Properties, Polarization Mechanisms, Capacitance Loss, and Breakdown: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Dielectric Properties, Polarization Mechanisms, Capacitance Loss, and Breakdown: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Dielectric Properties, Polarization Mechanisms, Capacitance

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Dielectric Properties, Polarization Mechanisms, Capacitance Loss, and Breakdown. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Magnetic Materials: Domain Theory, Hysteresis Loops, Soft and Hard Magnets: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Magnetic Materials: Domain Theory, Hysteresis Loops, Soft and Hard Magnets: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Magnetic Materials: Domain Theory, Hysteresis Loops, Soft an

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Magnetic Materials: Domain Theory, Hysteresis Loops, Soft and Hard Magnets. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Materials for Computing Hardware: Silicon Wafers, FR4 Laminates, Solders, and Thermal Pastes: Theoretical Foundations, Modeling & Architecture

CPE 112 • 100L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Materials for Computing Hardware: Silicon Wafers, FR4 Laminates, Solders, and Thermal Pastes: Computations, Implementation & Verification

CPE 112 • 100L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: Materials for Computing Hardware: Silicon Wafers, FR4 Lamina

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: Materials for Computing Hardware: Silicon Wafers, FR4 Laminates, Solders, and Thermal Pastes. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 112: Engineering Materials Science
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 112: Engineering Materials Science.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CPE 112: Engineering Materials Science | PAMCET University — B.Eng | PAMCET