Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 313: Microprocessor & Microcontroller Laboratory

Hands-on and simulated firmware: ARM Cortex-M bare-metal C, GPIO, timers, interrupts, ADC, UART, SPI, and I2C sensors.

Instructor
Created by PAMCET Learning Team
intermediate2 - 4 weeksEnglish

Course Overview

Hands-on and simulated firmware: ARM Cortex-M bare-metal C, GPIO, timers, interrupts, ADC, UART, SPI, and I2C sensors. Curriculum Structure & Core Modules: • 1. ARM Cortex-M Toolchain Setup: Cross-Compilers, Linker Scripts, and OpenOCD/GDB Debugging • 2. GPIO Register...

What You'll Learn

  • Configure development toolchains (Keil, STM32CubeIDE, GCC ARM) and debug firmware using JTAG/SWD.
  • Write bare-metal C drivers to toggle GPIO ports, read push buttons, and drive multi-digit seven-segment displays.
  • Implement timer-driven hardware interrupts and generate variable duty-cycle PWM to drive motors.
  • Read analog sensors using internal multi-channel ADCs with DMA data transfer to memory buffers.
  • Develop device drivers for external I2C/SPI sensors (accelerometers, temperature sensors, OLED displays).

Requirements

  • ARM Cortex-M development board (e.g. STM32 Nucleo / Blue Pill) or virtual simulator.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

ARM Cortex-M Toolchain Setup: Cross-Compilers, Linker Scripts, and OpenOCD/GDB Debugging: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

ARM Cortex-M Toolchain Setup: Cross-Compilers, Linker Scripts, and OpenOCD/GDB Debugging: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: ARM Cortex-M Toolchain Setup: Cross-Compilers, Linker Script

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: ARM Cortex-M Toolchain Setup: Cross-Compilers, Linker Scripts, and OpenOCD/GDB Debugging. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

GPIO Register Manipulation: Moder, Otyper, Ospeedr, Pupdr, and BSRR Registers in C: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

GPIO Register Manipulation: Moder, Otyper, Ospeedr, Pupdr, and BSRR Registers in C: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: GPIO Register Manipulation: Moder, Otyper, Ospeedr, Pupdr, a

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: GPIO Register Manipulation: Moder, Otyper, Ospeedr, Pupdr, and BSRR Registers in C. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

External Interrupt Configuration: EXTI Controller, Edge Triggers, and NVIC Priority Assignment: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

External Interrupt Configuration: EXTI Controller, Edge Triggers, and NVIC Priority Assignment: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: External Interrupt Configuration: EXTI Controller, Edge Trig

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: External Interrupt Configuration: EXTI Controller, Edge Triggers, and NVIC Priority Assignment. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

General Purpose Hardware Timers: Prescaler Calculations, Auto-Reload Registers, and Periodic Interrupts: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

General Purpose Hardware Timers: Prescaler Calculations, Auto-Reload Registers, and Periodic Interrupts: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: General Purpose Hardware Timers: Prescaler Calculations, Aut

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: General Purpose Hardware Timers: Prescaler Calculations, Auto-Reload Registers, and Periodic Interrupts. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Pulse-Width Modulation (PWM) Generation: Motor Speed and LED Brightness Control: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Pulse-Width Modulation (PWM) Generation: Motor Speed and LED Brightness Control: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: Pulse-Width Modulation (PWM) Generation: Motor Speed and LED

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: Pulse-Width Modulation (PWM) Generation: Motor Speed and LED Brightness Control. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Analog-to-Digital Conversion: Single Conversion, Continuous Scan, and DMA Circular Buffers: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Analog-to-Digital Conversion: Single Conversion, Continuous Scan, and DMA Circular Buffers: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Analog-to-Digital Conversion: Single Conversion, Continuous

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Analog-to-Digital Conversion: Single Conversion, Continuous Scan, and DMA Circular Buffers. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

I2C Sensor Driver Implementation: Start Condition, 7-Bit Address Framing, and Register Read/Write: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

I2C Sensor Driver Implementation: Start Condition, 7-Bit Address Framing, and Register Read/Write: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: I2C Sensor Driver Implementation: Start Condition, 7-Bit Add

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: I2C Sensor Driver Implementation: Start Condition, 7-Bit Address Framing, and Register Read/Write. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

SPI Display Driver: Master Mode Setup, Clock Phase/Polarity, and Frame Buffering on OLED Displays: Theoretical Foundations, Modeling & Architecture

CPE 313 • 300L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

SPI Display Driver: Master Mode Setup, Clock Phase/Polarity, and Frame Buffering on OLED Displays: Computations, Implementation & Verification

CPE 313 • 300L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: SPI Display Driver: Master Mode Setup, Clock Phase/Polarity,

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: SPI Display Driver: Master Mode Setup, Clock Phase/Polarity, and Frame Buffering on OLED Displays. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 313: Microprocessor & Microcontroller Laboratory
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level intermediate
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 313: Microprocessor & Microcontroller Laboratory.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.

CPE 313: Microprocessor & Microcontroller Laboratory | PAMCET University — B.Eng | PAMCET