Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 110: Workshop Practice & Fabrication Technology

Workshop safety, hand tools, benchwork, sheet metal, welding, electrical wiring, and soldering technology.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Workshop safety, hand tools, benchwork, sheet metal, welding, electrical wiring, and soldering technology. Curriculum Structure & Core Modules: • 1. Industrial Workshop Safety, Regulations, Fire Prevention, and First Aid • 2. Measuring and Marking-Out Tools: Vernier Calipers,...

What You'll Learn

  • Apply workshop occupational health, hazard identification, and safety rules strictly.
  • Perform precision benchwork including marking out, sawing, filing, drilling, and tapping.
  • Execute sheet metal development, cutting, bending, and riveting for electronic enclosures.
  • Demonstrate fundamental electric arc and oxy-acetylene welding joints with safety precautions.
  • Execute through-hole and surface-mount soldering and desoldering according to IPC-A-610 standards.

Requirements

  • Safety boots, overall coat, safety glasses, soldering kit.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Industrial Workshop Safety, Regulations, Fire Prevention, and First Aid: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Industrial Workshop Safety, Regulations, Fire Prevention, and First Aid: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Industrial Workshop Safety, Regulations, Fire Prevention, an

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Industrial Workshop Safety, Regulations, Fire Prevention, and First Aid. Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Measuring and Marking-Out Tools: Vernier Calipers, Micrometers, and Height Gauges: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Measuring and Marking-Out Tools: Vernier Calipers, Micrometers, and Height Gauges: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Measuring and Marking-Out Tools: Vernier Calipers, Micromete

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Measuring and Marking-Out Tools: Vernier Calipers, Micrometers, and Height Gauges. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Bench Work and Fitting: Hand Saws, Files, Scrapers, Taps, and Dies: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Bench Work and Fitting: Hand Saws, Files, Scrapers, Taps, and Dies: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Bench Work and Fitting: Hand Saws, Files, Scrapers, Taps, an

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Bench Work and Fitting: Hand Saws, Files, Scrapers, Taps, and Dies. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Machine Tools Practice: Drill Press Operations, Cutting Speeds, and Lubrication: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Machine Tools Practice: Drill Press Operations, Cutting Speeds, and Lubrication: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: Machine Tools Practice: Drill Press Operations, Cutting Spee

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: Machine Tools Practice: Drill Press Operations, Cutting Speeds, and Lubrication. Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Sheet Metal Fabrication: Shearing, Bending Brakes, Hemming, and Fasteners: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Sheet Metal Fabrication: Shearing, Bending Brakes, Hemming, and Fasteners: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: Sheet Metal Fabrication: Shearing, Bending Brakes, Hemming,

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: Sheet Metal Fabrication: Shearing, Bending Brakes, Hemming, and Fasteners. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Welding Technology: Shielded Metal Arc Welding (SMAW) and Joint Geometries: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Welding Technology: Shielded Metal Arc Welding (SMAW) and Joint Geometries: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Welding Technology: Shielded Metal Arc Welding (SMAW) and Jo

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Welding Technology: Shielded Metal Arc Welding (SMAW) and Joint Geometries. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Electrical Installation: Consumer Units, Conduit Wiring, Earthing, and Bonding: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Electrical Installation: Consumer Units, Conduit Wiring, Earthing, and Bonding: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Electrical Installation: Consumer Units, Conduit Wiring, Ear

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Electrical Installation: Consumer Units, Conduit Wiring, Earthing, and Bonding. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Electronics Assembly: Soldering Station Setup, Flux, Solder Types, and Desoldering: Theoretical Foundations, Modeling & Architecture

CPE 110 • 100L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Electronics Assembly: Soldering Station Setup, Flux, Solder Types, and Desoldering: Computations, Implementation & Verification

CPE 110 • 100L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: Electronics Assembly: Soldering Station Setup, Flux, Solder

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: Electronics Assembly: Soldering Station Setup, Flux, Solder Types, and Desoldering. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 110: Workshop Practice & Fabrication Technology
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 110: Workshop Practice & Fabrication Technology.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.