Skip to main content
B.Eng DegreeFaculty of Faculty of Engineering & TechnologyComputer Engineering

CPE 208: Sequential Logic & Digital Systems Design

Latches, flip-flops, synchronous state machines (Mealy/Moore), counters, shift registers, timing, and Verilog introduction.

Instructor
Created by PAMCET Learning Team
beginner2 - 4 weeksEnglish

Course Overview

Latches, flip-flops, synchronous state machines (Mealy/Moore), counters, shift registers, timing, and Verilog introduction. Curriculum Structure & Core Modules: • 1. Bistable Multivibrators: Latches (SR, D) vs Edge-Triggered Flip-Flops (SR, D, JK, T) • 2. Flip-Flop Timing...

What You'll Learn

  • Compare operation, characteristic equations, and excitation tables of SR, D, JK, and T flip-flops.
  • Design synchronous sequential circuits using formal state diagrams, state tables, and state minimization techniques.
  • Synthesize Mealy and Moore finite state machines (FSM) with robust reset and error-handling states.
  • Design multi-bit synchronous up/down counters, ring counters, Johnson counters, and universal shift registers.
  • Analyze setup time, hold time, clock skew, and metastability in high-speed clocked sequential systems.

Requirements

  • Completion of CPE 207.

Degree Programme Curriculum Context

This course is a curriculum unit of the Bachelor of Engineering (B.Eng.) in Computer Engineering degree framework in Nigeria.

Earn Your Certificate

Showcase your skills with a certificate! Complete the course, submit your project, and earn your certificate. Here's a sample of what you'll receive to show off your accomplishments.

course-certificate
Lecture Board & Syllabus

Course Curriculum

Browse complete theoretical foundations, worked calculations, laboratory protocols, and board assessment questions under each topic.

Launch Course Reader →
8 Chapters
•
16 Lecture
•
24h
Subtopic 1Document LectureOpen Access~3 min read

Bistable Multivibrators: Latches (SR, D) vs Edge-Triggered Flip-Flops (SR, D, JK, T): Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 1 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Bistable Multivibrators: Latches (SR, D) vs Edge-Triggered Flip-Flops (SR, D, JK, T): Computations, Implementation & Verification

CPE 208 • 200L &b

Module 1 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 1 Formative Assessment: Bistable Multivibrators: Latches (SR, D) vs Edge-Triggered F

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 1: Bistable Multivibrators: Latches (SR, D) vs Edge-Triggered Flip-Flops (SR, D, JK, T). Aligned with NUC CCMAS and COREN OBE standards.

Module 1 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Flip-Flop Timing Parameters: Propagation Delay, Setup Time, Hold Time, and Recovery Time: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 2 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Flip-Flop Timing Parameters: Propagation Delay, Setup Time, Hold Time, and Recovery Time: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 2 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 2 Formative Assessment: Flip-Flop Timing Parameters: Propagation Delay, Setup Time,

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 2: Flip-Flop Timing Parameters: Propagation Delay, Setup Time, Hold Time, and Recovery Time. Aligned with NUC CCMAS and COREN OBE standards.

Module 2 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Analysis of Clocked Sequential Circuits: State Equations, Transition Tables, and Diagrams: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 3 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Analysis of Clocked Sequential Circuits: State Equations, Transition Tables, and Diagrams: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 3 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 3 Formative Assessment: Analysis of Clocked Sequential Circuits: State Equations, Tr

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 3: Analysis of Clocked Sequential Circuits: State Equations, Transition Tables, and Diagrams. Aligned with NUC CCMAS and COREN OBE standards.

Module 3 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

State Reduction and State Assignment Methods (One-Hot, Gray, Binary Encoding): Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 4 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

State Reduction and State Assignment Methods (One-Hot, Gray, Binary Encoding): Computations, Implementation & Verification

CPE 208 • 200L &b

Module 4 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 4 Formative Assessment: State Reduction and State Assignment Methods (One-Hot, Gray,

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 4: State Reduction and State Assignment Methods (One-Hot, Gray, Binary Encoding). Aligned with NUC CCMAS and COREN OBE standards.

Module 4 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Design of Synchronous Finite State Machines (FSM): Mealy and Moore Architectures: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 5 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Design of Synchronous Finite State Machines (FSM): Mealy and Moore Architectures: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 5 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 5 Formative Assessment: Design of Synchronous Finite State Machines (FSM): Mealy and

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 5: Design of Synchronous Finite State Machines (FSM): Mealy and Moore Architectures. Aligned with NUC CCMAS and COREN OBE standards.

Module 5 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Design and Implementation of Synchronous Counters (Mod-N, Up/Down) and Sequence Detectors: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 6 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Design and Implementation of Synchronous Counters (Mod-N, Up/Down) and Sequence Detectors: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 6 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 6 Formative Assessment: Design and Implementation of Synchronous Counters (Mod-N, Up

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 6: Design and Implementation of Synchronous Counters (Mod-N, Up/Down) and Sequence Detectors. Aligned with NUC CCMAS and COREN OBE standards.

Module 6 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Registers and Shift Registers: PIPO, SIPO, PISO, SISO, and Bidirectional Universal Registers: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 7 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Registers and Shift Registers: PIPO, SIPO, PISO, SISO, and Bidirectional Universal Registers: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 7 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 7 Formative Assessment: Registers and Shift Registers: PIPO, SIPO, PISO, SISO, and B

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 7: Registers and Shift Registers: PIPO, SIPO, PISO, SISO, and Bidirectional Universal Registers. Aligned with NUC CCMAS and COREN OBE standards.

Module 7 • Formative Assessment
Subtopic 1Document LectureOpen Access~3 min read

Timing Hazards, Metastability, Clock Skew, and Introduction to Hardware Description in Verilog: Theoretical Foundations, Modeling & Architecture

CPE 208 • 200L &b

Module 8 • Subtopic 1•500 characters of authentic academic content
Subtopic 2Document LectureOpen Access~3 min read

Timing Hazards, Metastability, Clock Skew, and Introduction to Hardware Description in Verilog: Computations, Implementation & Verification

CPE 208 • 200L &b

Module 8 • Subtopic 2•500 characters of authentic academic content
Formative Assessment10 Points • 15 Mins

Chapter 8 Formative Assessment: Timing Hazards, Metastability, Clock Skew, and Introduction

Assessment Protocol:10 Total Points•70% Passing Threshold•15 Mins Time Limit•Bloom's Taxonomy: Analyze & Evaluate

Rigorous formative competency assessment for Chapter 8: Timing Hazards, Metastability, Clock Skew, and Introduction to Hardware Description in Verilog. Aligned with NUC CCMAS and COREN OBE standards.

Module 8 • Formative Assessment

Instructor

PAMCET Learning Team

PAMCET Learning Team

Institutional Course Curation · PAMCET

The PAMCET Learning Team is the institutional curriculum and content group behind course publishing on this platform. PAMCET (Professional and Academic Management Centre for Education and Training) is operated by Digitpen Hub Ltd, a company registered in Lagos, Nigeria. Courses credited to the PAMCET Learning Team are structured, organized, and published centrally by the platform rather than authored by a single named individual instructor — each course's syllabus, learning outcomes, and content are reviewed before publication under this institutional account. For questions about a specific course or to report a content issue, please use the platform's Help & Support or Contact Us pages.

Qualifications:

PAMCET Learning Team — Institutional Course Curation, Digitpen Hub Ltd

My Skills:

  • Curriculum Curation
  • Course Content Review
  • Learning Outcome Design
  • Course Publishing & Quality Assurance
  • Platform Content Operations

Reviews

No reviews available
CPE 208: Sequential Logic & Digital Systems Design
Free$24.99100% Off
Certificate available separately for $7 after completion

Course Includes

8 Chapters
16 Lectures
2 - 4 weeks
Skill Level beginner
Taught in English
Lifetime Access
Certification of Completion
Category: University - Computer Engineering
Share On

Download Syllabus & Study Guide

Receive the full lecture syllabus, reading list, and milestone schedule for CPE 208: Sequential Logic & Digital Systems Design.

By submitting, you agree to receive educational updates. You can unsubscribe anytime. Read our Privacy Policy.